Photosmart HP 5510 will not print.

Black in do not print! Ugh! Brand new black cartridge low on the colors.  Went through all the normal procedures for the clean printheads, aligning printer, get out the ink and handed in...  Colors will be printed on these pages, but not black.  Yes, HP cartridge not a fall. Help!

This document can enlighten us here:

http://support.HP.com/us-en/document/c02914910

Tags: HP Printers

Similar Questions

  • Photosmart HP 5510 - will not print using black ink

    I have problems with my HP Photosmart 5510 all-in-One printer, because it will not print in black. All cartridges are brand new and are genuine HP cartridges. I've never used anything other than HP cartridges, and I believe that I have would be considered a very light printer user.

    I use a HP Pavilion Desktop PC (Vista Home Premium) connected to the printer via a USB cable.

    I have to 'reset' the printer (power cable removed for 20 seconds), I cleaned the print heads and tried to re-alignment of the printer.

    I ran HP print and Scan diagnostics and do the message "Everything out OK with your product." I then print a test page which "fails", that there is no black ink in use. The diagnosis confirms that the ink levels are all OK and that my printer uses HP authentic and than Normal inks or better quality is selected.

    The printer is a little over a year old and as mentioned has had very light use.

    There is no error - every reason to believe that everything is OK.

    I wish I had a solution to this problem.

    As by chance my previous printer a HP Photosmart 3210 all-in-One failed in a similar way, although in this case, the black was fine, it was impossible to print colors correctly. Once the printer was just out of warranty.

    Curiously enough and fortunately like few others on the forum a few days after the installation of the new cartridge, it seems to work perfectly fine again.  any ideas as to why this happens?

  • Photosmart HP 5510 will not print in black

    I replaced the cartridge, made sure that the cartridge was evacuated, but could not find the control panel how to clean the print head. I followed the instructions carefully, but my computer laptop gateway has not called to configuration tools.

    Hello patl46616,

    Welcome to the HP Forums!

    I understand that your Photosmart 5510 print no black ink. I will do my best to help you! You can "Clean printhead" on the control panel of your printer:

    1. Make sure that this ordinary letter of white American or A4-size paper is loaded in the tray.
    2. From the Control Panel Home screen, press the right arrow key ( ), then tap the Setup icon ( ).
    3. Tap Tools , and then tap print head cleaning . The printer cleans the print head and then prints a test page.

    Also, follow this HP document on fixing of the streaks of ink faded prints and other common Print quality problems Please post your results, I will be looking forward to hear from your part have a good night!

  • ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

    My printer model:

    HP PHOTOSMART ALL-IN-ONE 5510 B111A

    Problem:

    Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

    What I've tried so far:

    I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

    I've seen people questioned on this issue before and there is no solution. I really need help from HP!

    After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

    1. find your PC's DNS servers by typing ipconfig/all in CMD.
    2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

    To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

    3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

    4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

    5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

    6. change your standard channel to 6.

    7 find the wireless security and replace your WPA-personal security mode.

    8 disable UPnP

    9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

    10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
    I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

  • Re: HP Photosmart 5510 - will not print using black ink

    I received a WARNING ink level so I went out and bought new cartridges. When I put the new in, black will not print.

    I followed all the instructions on my printer, all the instructions of the hp print & Scan Doctor and went out to buy a new black cartridge in the second.

    tracking of document Hp: http://support.hp.com/us-en/document/c03425035

    Still no black printing.

    I cleaned the print heads.

    So I have three cartridges of "True HP", two of them nine and no black print.

    Are there any other instructions that can be followed to fix my printer? It is more under warranty and there is no way I'm paying for a repair on a printer who leave work when installing a new cartridge.

    @lcaughey

    I'll me private message you on this (check in the envelope at the top right)

  • Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

    I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

    On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

    How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

    Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

  • Photosmart C & 180 will not print red

    The printer has suffered when we had a power cut and he was turned on.

    Since then, it will not print red. (I just get yellow).

    Have looked through the wire "Will not print Magenta", I'm not sure who, magenta cartridges (or both), I need to try hard - or if there are a few other adjustments that I do.

    Hello Phil1812,

    Please confirm the process you have already finished.

    Another process, you could try is as follows:

    (1) remove all ink cartridges.

    (2) close the ink access door.

    (3) disconnect the printer.

    (4) wait for about 30 seconds.

    (5) connect the printer.

    (6) a message indicating to load the cartridges should appear on the control panel.

    (7) reload cartridges.

    Kind regards

    Lynn_B

  • Photosmart HP 5510 is not printing black

    After I changed my black cartridge with a new one (original HP 364 XL), it does not print any black.

    I did all the steps I found here on the forum, apparently this problem is pretty common with the 5510 after he reached the age of one year... but none worked.

    I read that the last option is a reset 'special '? I would like to know how it works.

    No matter what HP tech out there who can help me?

    Thank you!

    Hello lennaertand welcome to the Forums of HP.

    I see that you are having problems with your printing, and you are looking for a specific reset.  If you check your private messages, I will give you the steps to perform the reset, so please check your Inbox.  So, here is a link to the Online Privacy Statement HP.

    Thanks for posting on the HP Forums.

  • I have a Photosmart 6510, which will not print in black.

    My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

    I tried all the basic tests & troubleshooting but who still have the problem.

    It allows to print from the photo tray 4 x 6 end.

    Help, please!

    Steve

    Hello bcgoodwrench,

    I don't see you mention the presence of 'BLACK'.


    If there was no black printing, then I would say you call the HP Technical Support for assistance.

    If you are in the United States, the toll free # is 1-800-474-6836 .

    If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

    Kind regards
    Jabzi

    Help the community by marking this post.
    Your question has been answered? Mark it as a accepted Solution!
    See a great post? Give it a Bravo!
    I work for HP

  • HP Photosmart 7520 series will not print from laptop

    Printer not print HP Pavilion dm4. Error message is the driver problem Microsoft Teredo Tunneling adapter with an error code of 10. Help, please!

    Hello

    Please try the hotfix o instructions to the following address:

    http://appuals.com/Microsoft-Teredo-tunneling-adapter/

    Kind regards.

  • Photosmart Premium c310 will not print from the photo tray. Market power does not work.

    HP Photosmart Premium c310 refuses to print from the photo tray.  I use an iMac.  I shot tray in and out, nothing.  I stoked market, nothing.  Whenever I try to print a photo, it pulls the main tray.  He doesn't even try to pull the photo tray.  And I select in the settings of Photo paper in the photo tray.  Oh, and I have never tried to print before photos.  This is my first time and it won't work.  Printing regular documents from the main tray works fine.   Can someone please help?

    Are you printing from iPhoto?  If so (and this may apply to other applications), you must specify the format and print size.  Make it look like this:

  • My Photosmart HP 6515 will not print in black

    My hp 6515 not print black, I replaced the cartridge,.

    Hi Frank,.

    Consult the troubleshooting provided by Hp paper

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03760633&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5191794

    If the problem persists, contact HP.

    http://h30434.www3.HP.com/

    Hope this could help you. If you have any concerns related to Windows, let us know.

  • Photosmart 5510 - will not print in black ink

    PRINTER HAS FAILED - CLOSING OF THE FORUM.

    {title of the origninal thread restored in order to make the more searchable topic}

    This is a simple fast recommendation I would try.

    Remove the cartridges from the printer. Once they are there, try a hard reset of the printer. Once the printer turns and asks the cartridges, then go ahead and implement what their return.

    Follow these steps to perform a hard reset on the printer.

    1. press the power button to turn on the product.

    2. with the product, unplug the power cord from the back of the product.

    3. disconnect the power cord from the wall outlet.

    4. wait at least 15 seconds.

    5. plug the power cord into the wall jack.

    6. reconnect the power cord to the back of the product.

    7. If the product does not light by itself, press the power button to turn it on.

    Try and let me know if it helps. If not, there is probably a more serious hardware with the printer problem. Especially if you have experienced already troubleshooting guides. There is still one thing, we can try, which requires a certain type of reset of the printer, but I will have private message you the steps to do this.

    If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it!

    Good luck

    Kyle

  • HP Photosmart 5520: HP Photosmart 5520 suddenly will not print or scan

    Suddenly is no longer able to scan or print on HP Photosmart 5520. With the scan function I use scanning to e-mail, but, after long 'Preparation scanning' on the screen of the printer, the error message "temporarily unavailable.  "Please try again later". With the impression that I use Google Cloud Print (from an Acer Chromebook) and all that happens is that the demand to print everything ends up in a queue of print jobs.  No error message appears on the printer screen. The copy function works fine.  Wireless network printing results are very good.  The printer worked fine for over a year.  Can anyone help?  Thanks in advance.

    Thanks a lot for taking the time to answer.

    It's all very mysterious, but it seems to have corrected itself.  Finally, the 'out of paper' error message appeared yesterday (there were many), I pushed in the paper and things started to print again.  I was also able to rescan.  Not sure if she was no longer a problem of Google or what but we are in service again.

    Thank you very much!

  • Photosmart HP 6510 will not print black text of emails but ok for photos and web pages

    Suddenly, it stopped printing black text of emails but prints black on web pages and images. I renewed the HP black cartridge and downloaded the HP PHOTOSMART FULL FEATURE AND DRIVERS SOFTWARE today and the problem persists.

    When I print QUALITY REPORT printing any black ink level is shown, but black media are there. very strange.

    Can I please ask your help to fix this annoying problem for me.

    Thanks for the reply daveclix

    I agree that this is not a problem with your PC, it's a hardware problem with the printer. The information you supplied I'm going to send you a private message to discuss the next steps to take

    If you are unsure how to check your messages on the forum this post, has instructions.

Maybe you are looking for

  • Display/save image in 8-bit grayscale

    I have a VI that captures an image in grayscale 8 bits (table 1 d of 1500 pixels). It has a 10-byte header that I remove and try to view it.  The problem is that the image is considered to be a RGB.  In addition, the saved image can be opened with an

  • I get an error message saying that the mail was not sent when sending a PDF file in Outlook Express.

    Outlook Express 6 HelloRecently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confir

  • Waterfalls: textStyle.color ignored for TextArea created running

    I'm trying to set the color of the text in a text box created running. My main.xml inserts MyWidget static control like this: import bb.cascades 1.0 Page { content: Container { objectName: "topLevel" MyWidget {} } } MyWidget.qml looks like this: Cont

  • Date and avoid changes to my computer Compaq Mini CQ10

    HelloW Microsoft Community, I've got this Compaq Mini CQ10, whose battery is dead. Its CMOS battery also died and I took a step to replace since when I turn my pc off and disconnect the power adapter and plug it back, turn on I display the Date and t

  • Insert Image in SQLite as ablob

    I have the database sqlite and work very well and I want to insert an Image in SQLite as ablob but I do not know how to insert and select anyone have any expline example or link this Thanks to advansed