Photosmart HP 7510: Change what black ink cartridge is used.

Similar Questions

• HP Photosmart 6510 alignment Page failure, black ink cartridge not working not

  I'm on Mac OSX using the Photosmart 6510 AIO printer 10.7.4. I had problems before printing (black ink would not introduce yourself, sensor said that there was still a lot) so I ordered new cartridges. I printed a report of quality and the color came out great but black came out uneven. Then I used the align parameter and it printed once more uneven black ink and the screen on the printer read "the alignment page failed. It's frustrating, because the printer was used only at the end of last semester and he has not worked since I set up for this semester. Any help would be greatly appreciated, thank you!

  Ryan

  The steps in this troubleshooting page can help solve the problem.  If it is printing black but spotted I expecially make sure I check the vents and run a cleaning cycle.  If the above does not resolve the issue, see the post here.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e

  Black ink cartridge stopped working.  I replaced the cartridge with a new cartridge, HP 564 XL.  Used printer clean print head and Align tools.  Received message 'alignment failed.  Cartiridges are defined for quality parameters' the printer is off guaranteed so no help from HP.  Does anyone have any suggestions as to what to do?

  Hi @aquaharry,

  Welcome to the Forums of HP Support! I see that you have recently changed the black cartridge on your HP Photosmart 7520 and now you cannot print. You get a "alignment failed.  Cartridges are defined for quality parameters "."

  I wish you continue troubleshooting here: color or black ink not print

  Complete all of THE steps and make sure that the cartridges are properly ventilated.

  What are the results, you are FTA now to complete a successful harmonization?

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can easily say 'Thank you' by pressing the "Thumbs up" icon.

• Photosmart HP 7520 - selection between large and small black ink cartridges

  Hello

  How to choose the big back in print cartridge. 564 large black ink cartridge and the small cartridge is 564 photo XL.  The printer uses only the thin cartridge ink and not the large carridge. Is it possible to select one cartridge to another?

  Thank you

  So looks like you do not print photos and print text documents only the photo ink is used.  Does not serve ordinary black ink.  Are read you the ink gauge of the printer or the computer?  They both agree?  I have some additional questions.

  1. What is the ink level estimated for each cartridge according to the gauge of printer ink?
  2. Are one of the toner cartridges "SETUP"?  If so, which?
  3. Are the HP brand ink cartridges?
  4. Have you removed and reinstalled ink cartridges?  Does make a difference.
  5. You have run the print head cleaning utility?  To do this, click the key button, then Tools , then on print head cleaning.  I ran 2 or 3 times.

  Are there changes?

• I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation.

  I have a HP Photosmart more and I'll have the time the harder the 564 black ink cartridge installation. It it not a cartridge 564xl. I am really considering to resume this printer and turning it.

  Hello

  What seems to be the issue. His are more in there or something like that? If so, check the icon on top of the cartridge, it should be a Hexagon, if you want to mount a "bow tie" it does not, since it is a photocartridge that is not supported by your printer.

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• Use black ink cartridges into the two slots? HP Photosmart C4795 - no color cc = us

  Can I use black ink cartridges into the two slots? HP Photosmart C4795 - no color, to save money?

  Hey JJ - B,.

  You cannot use a black cartridge in both slots. The print head channels are different for print 3 colors in a slot vs only black print out on each other. Using black in the two slots certaining most will cause errors and possibly damage the printer.

  Is there a reason you want to run the two blacks to be with? You can still print with only the back cartridge installed.

  Good luck!

  Sean

• Black ink cartridge HP Photosmart C309 to print not

  All of a sudden my printer does not print any black.  I have cleaned the print head (by using tools of the printer), came out of the cartridge and shook to see if he has really ink in it (printer says that it is complete), and it spend it.  The printer has been used regularly - it's not dry.  I tried to print the "status report" and the only thing that prints is the ink supply photos.  The thick black cartridge shows nothing, as if the cartridge is empty.  Can anyone help?

  Hi all

  my HP Photosmart Premium C309a was partially by printing in black and white only, when black has failed. I thought that the startup ink level may have been wrong on the front panel, so I bought a new black ink cartridge. Same problem and so I found this forum. I did a clean cartridge and the black began to work again. It is certainly a matter of keep an eye, and not one I am happy to know. My printer is only 1 month.

• Problem printing HP Photosmart series 4100 with black ink cartridge

  Although the two black ink cartridges indicate that they r at least 1/2 they full r impression as if they were empty. Pale color impossible to read. What is the problem?

  Hi Bialy,

  I found the troubleshooting guide for the issue of fading print.

  Please try and let us know the status.

• Black ink cartridge will not print in HP Photosmart Plus B209

  I have had this printer for years.  I had a few problems here and there, but it was basically a machine reliable and quality.  A week or two ago, my HP black ink cartridge ran out.  I tried an ink cartridge not HP for the first time.  (Gasp!)  It did not work.  I assumed it was less and I pulled it.  I then installed a new HP black cartridge 564XL.  But still no black ink is printed.  I ran 'clean' in the Tools menu print head several times.  I cleaned the electrical contacts.  I made sure that the evacuation of cartridge area was clear.  I removed the cartridges, unplugged for a minute or two and reinstalled them.  Nothing has worked.  Probably put in this cartridge not HP for a few minutes is not totally destroy my printer!   Any help will be greatly appreciated.

  Well, this printer has been crossed at my nearest store Big Box Office Supply for recycling.  I ordered a new printer (* certainly * NOT a HP!) and it will be delivered today.  HP, when figure you you lose your faithful?  There was a time I thought that all that HP was almost sacred in the world of technology.  No more, no more.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!