Photosmart HP 7520 - erasure of the tapes through photo printed on plain paper to A4

Montain Lion 10.8.1 operating system

I want to print some black and white photos on plain paper in A4 format and each time it prints with about 1.5 cm wide strips all the way across the paper in different shades of black (e.g. pale and dark).

The tapes show vertical here because the page was printed in landscape mode.

I cleaned and aligned to the printhead about 4 times but the problem persists.  Even when I print the print quality diagnostics page, it shows the same bands on the color blocks.

This is what it looks like:

Can someone please

Thank you very much

Tolo

Hi stix4, thank you very much for your answer.

All I have is genuine HP cartridges. I just tried (and managed to get to the HP Technical Support!)

Had to go into the service menu and proceed with the instructions given, but the problem persists.

They are sending me a new printhead that I hope will sort the problem.

Once again, thanks a lot

Tags: HP Printers

Similar Questions

  • Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

    HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

    Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

    Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

    Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

    Door on this forum and general web search.  Nothing has yet solved problem.

    What should I do?  Any ideas/suggestions?

    Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

  • Photosmart HP 7520 - message that the printer is offline or there is a problem

    Trying to set up a new printer HP Photosmart 7520 wireless.  The test print off shows that everything was fine.  I closed my firewall and tried other diagnostic tests.  Everything tells me my printer is fine, but when I try to print anything I got a message saying that the printer is offline or there is a communication problem with the printer.  Can anyone help with this?

    Moved from feedback

    Original title: impression of the printer

    Hi Lala,

    1 did you changes to the computer before the show?

    2. what operating system you have installed in the computer?

    See the steps from this link:
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02221706

    I suggest you also following article to solve printer problems in Windows Vista and Windows 7:

    Solve printer problems
    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

  • Photosmart 7520: How disable the cartridge on my printer HP 7520 protection

    Hello

    I would like to know how to disable the protection of the cartridge on my printer HP 7520

    Thank you

    Hello sandkeyfred,

    Welcome to the HP Forums.

    I see that you want to remove Protection of the cartridge"of the printer.

    This can not be removed.  It is in place to ensure that the cartridges do not run out and cause problems with the ink delivery system.  Here is a link that explains the use of ink in inkjet printers.

    Here is the contact information for Technical Support from HP. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thank you for your time.

  • Photosmart HP 5510: Error with the same type of print cartridge black that I use for more than a year

    Hello

    For the last days I'm not able to print anything from my Photosmart 5510, because I get the error message "" Black - cartridge incompatible generation more "or 'cartridge for printers of older generation'." In addition, it does not give me option as before proceeding, in any case and I can't activate wireless. So, actually I have no printer at all. I reinstalled the driver but the same thing, after I did that and restarted a printer.

    I've been ordering cartridges on eBay and Amazon for a few years now. They were not HP and printer always said to me that it is not genuine HP cartridge. I have no problem with notifications, as it prints well. I printed several pages of document .pdf only 4-5 days.  No problem at all. My ink level is very good, especially black, because I was always ordering the largest capacity I print a lot.

    This problem started today (or I had knowledge about this today) and there is no doubt that something has changed between the time where I printed the last time and now. But it's pretty clear that HP wants me to buy original cartridges. Is it not enough that my laptop is HP, my printer is HP... I should have freedom to choose what ink to buy and where to buy it. It worked a few days ago and I checked the black cartridge, that I get the error message, has at least 50% of ink left in it. Because HP wants me to throw it away, because it's not authentic?

    I'm really upset, because it is not a software, where we have to use the original permits. It's MY printer and I get to choose what cartridges I put in it, and where I buy my cartridges. If there answer like "it is not comapitble, etc.", well, it worked for a long time and printer tell me that there is problem with it. The problem with the cartridge just 'old generation '.

    If HP conitinues to press like that, I'll never buy anything HP again.

    Hello again Senahid77,

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

    Thanks again for your time.

    See you soon,.

  • PhotoSmart HP 7520: Set up the cartridge

    I've had my printer for about 1 to 2 years. All of a sudden, the printer does not print black - but I just replaced the large XL 564 black cartridge a few days ago.  The printer indicates the little Set Up black cartridge is out of ink.   Please advise next steps.  Thank you

    Hello

    Need to replace the narrower black ink (called Photo ink cartridge) cartridge that has a symbol of a camera on him.

    Kind regards.

  • Unable to connect to the internet through hp5510 printer

    As the subject line says:

    It's a printer Photosmart 5510. It prints and scans perfectly and all four laptops I installed it, the hp update downloaded software.

    When I first set up the printer, I was able to access additional applications online. After about half an hour, I lost the internet connection through the printer.

    I had installed using the automatic ip address selector and he gave me an address of 169.254.xxx.xxx.

    I have re-configured manually with a 192.168.xxx.xxx and even if the printer was working well with the PC it still wouldn't connect with internet.

    I have reset to factory settings and automatically and manually configured without success. Also, I restarted my router and changed the wireless channels.

    I can not yet use the eprint service anddownload any apps.

    My son tried to use a proxy, but it still wouldn't connect.

    As I said... .it worked for a short time and then stopped.

    Is there any solution for this?

    Thanks for any answers

    Hello

    Please try to manually set the DNS addresses in the EWS page:

    From your web browser, go to the EWS by typing the IP address of the printer.

    Enter the network tab.

    Click Network

    Click on the network (IP) address

    Under the DNS address Configuration, select manual DNS server and provide the following parameters:

    Define DNS preferred as 8.8.8.8

    and the alternative e-mail address 8.8.4.4

    Click on apply and try to access the Web Serives again.

    If the connection still does not work, and that the configured proxy address, enter the Web Services tab.

    Click the Proxy settings.

    Uncheck the option button, make sure that any field is left blank and click on apply.

  • brightness of the screen for photo printing

    HI, I you send some photos to a lab and need to adjust the brightness of the screen between 60 and 120 candela, edit images in Aperture, so do not come out too dark prints. I read that the iMac screen does not go down that low?

    If Yes, where about 60-120 candela brightness slider would be?

    Candela 90 so fundamentally.

    Jon

    To open a can big o ' to hate, but you will probably need a Spyder or ColorMunki hardware calibration.

  • The B9180 win 8 Print Prefs - no paper size option 'Custom '.

    After moving to Windows 8 and load the current driver, when I go to printing preferences > paper size options drop-down list does not appear 'Custom '.  Paper suzesare courses listed with 'More' below the line.  Under XP, "Custom" was below the threshold, and 'More' was above the line.  So the way it is, there is a way now to add a custom paper size.  Am I missing soething?

    OK - now it seems that the sky is not falling in - sorry for the Chicken Little routine.   I have re-ran the last download drivr of HP and I have the ability to make custom formats, and the printer freezes up when the PC goes to sleep.

    Once again, thank you for addressing this.   I apologize for the apparent false alarms.

  • How to set the dpi for photo printing in photoshop elements 4

    How can I configure PPP to print photos using photoshop elements 4... Thank you.  I don't want a resolution, but the asnd dpi if I can not then which version would be able to do...

    For further reading:

    http://www.Scantips.com/basics02.html

    http://www.Scantips.com/basics2c.html

    http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml

    You must also set the quality of the print with the printer driver to set the ouput dpi

  • solution for the Photosmart 7520 Portal Displays the HTML code in the browser

    We just bought a Photosmart 7520. After installing it on a Windows XP computer, I tried to run Start > HP > Photosmart HP 7520 series > HP Photosmart series 7520. Opens the web browser and the HPSPProgress.hta code was displayed. A few moments later HPSolutionsPortal.hta open in another browser window. I've uninstalled and reinstalled twice with the same results.

    Hello world

    Root cause:
  • Photosmart HP 7520 - paper tray selection

    Mountain Lion 10.8.2 operating system

    I try to print photos 4 x 6 "from the photo tray and have selected the paper type and size, quality, etc. on the window of the printer settings it's okay if I select flow since: Photo or Auto ferry, it still prints on plain paper A4 size froom the main tray.  (Yes, there are photo paper in the Photo tray)

    Can anyone help please

    Thank you

    Hey, Tolo,.

    Thanks for the post.  If you have some photos of test on a card, check the second link, which will tell us if it is a hardware or a software (settings) related issue.  Good luck!

    http://support.HP.com/us-en/document/c03461802

    http://support.HP.com/us-en/document/c03422299

  • Ink cartridge 5 hp7520: two black cartridges 7520 one full another empty but not printing black

    My black picture is empty (do not know why, do not use photo) the largest on the right side is almost full, but that's the impression not something black.  the colors are very well.   I tried to play with the setting but am at a loss.

    Help, please.  Thank you!

    Groll

    Welcome to the Community Forum of HP.

    It's just one of those things - you must have all five cartridges to print with that printer.

    Experience:

    The Photo black is not just for the pictures - this type of black is "jet black" and is used for special types of printing needs "black-black" including pictures, graphics and photos.

    Black regular print gray-black, gray, mixtures with other colors and prints some blackish fonts.

    You bought into this concept when you purchased this printer - maybe - not deliberately, but so much.  Additional 'Photo Black' is one of the reasons for this printer is capable of reproducing really excellent color photographic Images.

    ======================================================================

    The facts about Photo Black

    The following is provided by our own Provost Expert Bob_Headrick .

    The document explains how to use the ordinary black and photo black ink cartridges used in the 7520 Photosmart and printers Photosmart 7525.

    Partial extract:

    The smallest cartridge is the photo cartridge, used for printing of dark areas when the photo paper is selected in the driver, or 'automatic' paper selection is enabled, the media type is detected as photo paper.  It can also be used in some cases when you print graphics on plain paper.  If you are printing on plain paper make sure "plain paper" is selected in the selection of the type of media for the driver.

    Photosmart 7525 may require ink in all colors (including photos and black) to avoid any clogging of printheads.  See here for more information on how the ink is used.  PhotoSmart 7525 is an IIC printer in the terminology of this document.

    Bob Headrick, Microsoft MVP Windows Expert - consumer, HP Expert

    Message:

    Question about Photosmart 7525 / ink Photosmart 7520 - five

    ======================================================================

    If you wish, you can buy authentic HP inks from HP:

    HP SureSupply

    The delivery is free - and delivery is super fast, at least here in the USA.

    Reference:

    Drivers and software of printer features complete e-all-in-one HP Photosmart 7520

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Photosmart 6520: Photosmart 6520, plain paper, quick project

    during the last eighteen months, I did most of my black and white and color printing "pre-printed, quick project" under Presets. I also had the possibility of Photo paper, plain paper, Best Paper and plain black and white. I went on vacation and since returning I lost this election. I now have the choice of the project B & W B & W or color (sic!)

    Printing on plain paper, quick project is ideal for most of my impression that frequently included spot color. In order to print anything with color now, I have to use a lot more ink. I'm assuming that something has been updated while I was away, I can turn the clock back? I use Microsoft Office for Mac on an iMac and MacBook Pro. On the MacBook, the printer is Photosmart 6520 series but grayed out and Photosmart 6520 series (5AE5SCE), which is what shows on my iMac. (I got the MacBook Pro with me on vacation) Help please.

    Oops, sorry for the confusion...

    Just keep the color and enable Fas project listed, plain paper should already be default, or you can select in the form, then save the settings as the required preset.

    Kind regards

    Shlomi

  • Slow printing when printing on 6x8inch paper. With the help of my new printer HP Deskjet 1514.

    When I print on a page size 6 x 8 inch using black ink, the time taken to print the page is 1 Minute 40 seconds. It is indeed very slow!

    When I print the same exact pages on A4, the time taken to print the page is 15 seconds. This is acceptable!

    I use Windows 7 and Office 2007.

    In addition, no error message is displayed.

    Help, please!

    What are the parameters of type of paper? The speed to 6 x 8 paper resembles results would happen if printing on photo paper.

    If you are printing on plain paper make sure plain paper is selected in the driver.

Maybe you are looking for

  • SSD and RAM upgrades

    Hi, I own a macbook aluminum unibody (MB466LL/A) at the end of 2008 running el capitan right now and im planning to upgrade the 160 GB HARD drive for a 128 o 256 gb ssd. Question of HT is the next, what could you not apple community, buy a new SDS (s

  • can't change administrator Standard user

    Am wanting to change the kind of user on my computer. Right now its Admimistrator user defined on and I am wanting to change user Stanard, but it wont let me click on it

  • How to play the older game on wndows 7

    I BOUGHT A NEW COMPUTER AN EMACHINE THINKING I COULD PLAY MY GAMES MORE OLD BUT I CAN'T SEEM TO FIND A WAY YO PLAY THOSE GAMES... I WAS SURFING THE INTERNET FIND WAYS AND OPINIONS ON HOW TO START TO PLAY. IF THERE IS A WAY TO WORKAROUND SOMETHING PLE

  • Laptop HP ProBook 450: identification of the laptop?

    Hello: I recently bought this laptop and cannot find anywhere if it is a G1 or G2.  I checked my PC - properties, the backplate and the thin manual which accompanies it and can't find anything. In addition, how to identify which several digits is the

  • GPS test

    Hi, I would like to see the longitude and latitude on my mobile, what's not here? Thank you test of the package; Net.rim.device.api.ui import. *;Net.rim.device.api.ui.component import. *;Net.rim.device.api.ui.container import. *;Net.rim.device.api.sy