Photosmart HP 7520: Impossible to activate notifications from printer cartridge

Similar Questions

• Photosmart 2710 need to change region for the printer cartridges

  Hello:

  I am an international resident currently residing in the Brazil. My printer is programmed for Asian print cartridges and the region needs to be changed so that I can buy cartridges locally.

  When I changed from Europe to Asia, HP Singapore support has been very helpful and English speaking. Support for the Brazil speaks only Portuguese and I need instructions in English.

  Who should I contact for that, that I am out of warranty and the HP website is a labyrinth of unhelpfulness, if you are no longer under warranty.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• HP 7520: HP 7520 - impossible to activate Web Services - tried all of the solutions only in the last forums

  There are so many messages on this error dating yeas.  I tried all.  He used to work without any problems.  I tried the changes DNS 8.8.8.8 and 8.8.4.4, I reset my routers hundred times.  I entered my IP address in my browser and tried in this way.  No matter what I tried my Services Web will not work.  I have reset the factory settings and reinstalled the software on my computer to make sure that what was allowed.  Any other tips or thoughts?  Y at - it a proxy address that I can try?

  Hello

  From your PC, download and install the latest firmware below:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

  Once done, restart your printer and try to access Web Services, tht sould restore its functionality.

  Kind regards

  Shlomi

• Photosmart HP 7520: CHANGE THE configuration FOR MY PRINTER HP 7520 wireless

  When my printer has been set up by my neighbour she has implemented using his MAC wireless network.  She moves and will dismantle its printer and now I wonder if my printer still works or I need to set up wireless myself.  If so, how do that before she moves so my printer does not work?  A computer expert quoted me the sum of $150.00 to do this for me, but I hope I won't have to resort to that.  Thanks for your help.

  Hi @filgrastin and welcome to the Forums!

  I see that you are looking in the wireless options. I would like to help.

  There are two routes, you can opt for printing, if you lose the network, sure it is.

  First of all, if you have your own wireless network, you can connect to:

  The software configuration of the printer to a wireless network for the e-all-in-one printer series HP Photosmart 7520

  Second, you can connect a USB cable and print via a wired connection.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• I have a PHOTOSMART HP 7520 e-ALL-IN-ONE SERIES printer bought about 5 months ago.

  Where can I get instructions on how to use my printer for photos.  There is a small plateau, and I inserted the document oorrect.  I tried to print a picture on a sheet of letter-sized - and I mentioned the size - it was released only as half of a photo.  So I tried to print using the small leaves and it printed it is small but on one of my regular letter size sheets.  And the color will come out orange... Help... I need instructions.  Thank you!

  Hey maryjane41,

  I see that you are looking for more information on printing photos with your Photosmart 7520.  Please see the following link on the loading of special media types in this printer.

  Loading plain paper, Photo paper and envelopes

  In addition, take a look at the "Print" section of the Guide to the user, following the link.

  http://h10032.www1.HP.com/CTG/manual/c03456524.PDF

  Hope this helps,

  Jason

• choice of print from black cartridge

  I have a HP Photosmart of 7520... When I print from photoshop it automatically uses the black photo.  Most of the time I print things to change, and I really don't want to use my black photo just the regular black... HOW to do that?

  Thank you

  What operating system? Make sure that you select the appropriate media type - do not forget to select the paper if you are printing on plain paper.  If the driver is set for photo paper the standard black cartridge cannot be used to print black pigmented ink is not compatible with photo paper.

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• Impossible to activate the automatic update

  I tried securioty msc and Panel Essensials of Windows, as well as system menu... everything for nothing helped... less than 30 seconds of the automatic update is disabled.

  * Title *.
  Impossible to activate automatic update order to use Microsoft uypdate. Enery time that I manually activate the automatic updates, something disables it keeps me updated successfully in the update of Microsoft

  Mgawat,

  In addition to the information requested, try the fix it tool from the link below and let us know the results of that.  First run it in normal mode and test.  If you still have a problem then run it in aggressive mode.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Streaky printing cartridge Black XL Neuve (Photosmart 7520)

  I installed a new cartridge HP XL Black in the 7520 Photosmart ten days ago.  Today printing black-and-white text I mostly started to become unreadable - scratched, stained, faint - even if the ink level report about 3/4 full for black (of course, the report itself printed with streaks, etc..) I removed and re-inserted the black cartridge to do it has been placed correctly (it was and it is) and then I ran the proper function of the printer cartridges. The print quality report came back fine (including alignment) except that the black box was scratched. After completing this report in print quality, I tried printing text. The first document of a printed page a bit scratched and erratic low spaces; the second time I printed, it's almost unreadable. Any suggestions?

  Hi @witomx,

  Welcome to the HP Forums!

  I want to help my best with your Photosmart 7520 a bit stained black printing

  I know that you have done the cleaning, but I would recommend that you follow through this document to solve print quality problems by following the steps in this particular order should help the black printing normally.

  Let me know if you see improvements or if nothing changes and we'll go from there!

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the Agent FTR

  Dear all,

  I tried to activate the FTR agent but, impossible to activate it. When I checked the logs, I could see the following errors.

  "14/09/30 10:28:03.564 ECHO FATAL [Thread-40] com.quest.ftr.agent.ComMonitorThread - ComMonitorThread taken NoClassDefFoundError. Check the installation and the path of JAR files. Could not initialize class com.jacob.com.ComThread

  java.lang.NoClassDefFoundError: has not been initialized class com.jacob.com.ComThread
  at com.quest.ftr.agent.ComMonitorThread.run(ComMonitorThread.java:246)

  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  2014 09-30 10:28:03.564 ECHO VERBOSE [Thread-40] com.quest.ftr.agent.ComMonitorThread - bridge COM out restart = false
  2014-09-30 10:28:03.564 ECHO com.quest.ftr.agent.ComMonitorThread WARN [Thread-40] - Caught throwable son freeing com could not initialize class com.jacob.com.ComThread
  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.ftr.agent.ComMonitorThread - COM monitor thread exit
  2014-09-30 10:28:03.564 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection stopped
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.ftr.agent.FTRAgent - Agent stops collection
  2014-09-30 10:28:03.579 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - agent of destruction
  2014-09-30 10:28:03.579 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance agent - destroyed"

  Could someone check and help me on this.

  Thanks in advance. :)

  Hi Renon,

  The first thing to check is that you have a 32-bit Foglight Manager Agent to run the agent FTR (even if it is on OS 64 - bit). This is a common reason for the agent to fail to start.

  From the release notes: The Foglight Transaction recorder and player are supported on 32-bit and 64-bit systems. Transaction Foglight player works on 64 bit systems only if the 32-bit version of Foglight Manager Agent is installed.

  Kind regards

  Darren

• Photosmart HP 7520; How to start the print spooler inorder to connect the printer to the PC?

  Tried to update and received the error 1722: Windows Print Spooler Service has not started.  Checked the spooler that is set as automatic.  Cannot find drivers that update the WIFi connection so that I can print from Windows 7.  Am not able to print from the PC that is connected via WIFi.  Checked and the printer is connected via WiFi.  There are several automatic updates on my machine _ y at - it a mismatch to the printer, a HP Photosmart 7520 recently bought.  When the printer was originally installed, the print command worked until recently!  When I reinstall the printer software, I can't connect it to the Pc via a router.  I unplugged and rstarted the router and I tried to install a new printer.  This has not solved the problem that the 1722 error message reappears.

  Hi Howard,.

  I see that you get the 1722 error when trying to print. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. don't you make changes to the computer before the show?

  I suggest you try to run the printer Troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Also take a look at these articles that might help you.

  Install a printer: http://windows.microsoft.com/is-IS/windows7/Install-a-printer

  Printing to the correct printer: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Print a test page: http://windows.microsoft.com/en-US/windows7/Print-a-test-page

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

  I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

  The only way you would be able to improve Lightroom 3 Lightroom 5 is if you can find a version upgrade to purchase from a third-party vendor. 5 Lightroom is no longer sold by Adobe. The path to upgrade for you would be to 6 Lightroom Lightroom 3. This upgrade is available for $79 in the United States.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!