Photosmart HP5520: HP 5520 Photosmart All in One printer does not print

Hello

I was away for a few weeks and when I got home that my HP 5520 would not print. Troubleshooting in devices and printers did not fix it. The full current confirmed printer HP S/W installation wizard and the drivers installed. The installation wizard produces a test analysis, but not a test print.

Print and scan doctor also identities printer OK but cannot produce a test print, even if it did not produce a test INTERNAL page. Printing and scanning identified an issue with the S/W which "cannot be fixed without uninstalling and reinstalling" the software.

Software reinstalled as suggested, but it has stalled on "checking network das" so reinstal is not completed properly I guess. Now, I seem to be less well off than I was before.

I checked the print spooler and its running ok.

I checked windows udates and they are all up to date

I even tried restoring the system in desperation, but that has not changed anything either.

I tried using just USB connect - no effect

I have true wireless use only for connect - no effect

I am running windows 10 on HP pavilion laptop.

I'm running out of ideas on how I can print again, so any help would be greatly appreciated!

Thank you very much

This is the solution, for me at least. I was convinced there had to be a solution of windows related to this, but despite several attempts, I could not get the answers so ultimately I reset the PC and it took about an hour, but when he did all broken back in life and has worked as before. Bit of a pain having to reinstall software but it was worth it.

Tags: HP Printers

Similar Questions

  • XP starts from the USP port to which is attached a HP Photosmart 5520 e-all-in-one printer

    After installing a "HP Photosmart 5520 e-all-in-one printer" on an XP wihe a USB cable, the system tries to boot from USB port to which the printer is connected then.

    Installation gave no problems.

    To then begin XP - PC, the printer turnof.

    The bootsetup: first is the HARD drive. Who can help?

    Hi, welcome to the Forums of HP!

    I understand that your office is the start of your printer, and I'd be happy to help you!

    I suggest turning off your computer and unplug the USB cable to the back of the printer. Once the printer is unplugged and turned off, please re - turning on the PC. Condition that the computer starts well, please follow this document on the updated the BIOS on the PC. Once the update is complete, please reconnect the printer (USB) and power back on. Once again, please turn off the computer and turn it back on.

    If the computer still starts at the printer, please disconnect the USB cable to the printer. Turn off the computer and turn it back on. That it starts properly, run your antivirus software to search for viruses. I also have to know product and model number of the desktop for further research.

    I would ask you re-post with the results of your troubleshooting, and I follow diligently with you!

    See you soon

  • HP PSC 2410 Photosmart all-in-one printer SLOW printing

    All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

    Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

    I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

    Help!

    Hey Rainbow7000,

    I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

    I would have thought there would be some am indicator when the cartridge is low, but it was not.

    Thanks anyway.

    RenardB

  • HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

    I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

    HP Photosmart all-in-One Printer series - B010

    MacBook Pro / 10.8.1 (Mountain Lion)

    Router

    Hi yadin7,

    The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

    You can find the specifications listed below:

    Input/output
    USB port: Rear hi-speed
    

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

    Kind regards

    Shlomi

  • HP Photosmart all in one printer C7280 Windows Vista 32 bit.

    My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

    I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

    This problem?

    Thank you

    ducksterman.

    Hi again,

    If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

    Or

    To restore the default settings

    1.

    Press Setup.

    2.

    Press to select Tools, and then press OK.

    3.

    Press to select Restore Factory Defaults, then press OK.

    The default settings are restored.

    Let me know if that helps...

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • Need help printing on my C7280 Photosmart all-in-one Printer

    I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

    Hello

    1. what happens when you try to print?

    2 have you made changes on the computer before this problem?

    3. do you get any error code or error message trying to print?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the fixit from Microsoft Fixit article and if that helps.

    Problems printing and printing errors:

    http://support.Microsoft.com/mats/printing_problems/

    Method 2:

    Try the steps in the following Microsoft article and check if it helps.

    Printer in Windows problems:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope the information is useful.

  • Analyze the capacity of 5520 e-all-in-one printer to two computers

    I have an e-all-in-one printer Photosmart 5520 initially, I installed on my PC (windows). I downloaded the software for it on my MacBook Pro (snow leopard) successfully and print but having difficulty scans to my laptop. I activated the web analysis and can scan & e-mail scan from my laptop. When I tried to "Add a printer" (my laptop) on the HP site and entered the code request for the printer, I received a message that the printer has already been added to another computer and is limited to one account.  I have the HP Utility icon on my laptop computer desktop, but not the printer HP 5520 icon series that I have on the desktop PC that I would choose to get the print screen & scanning.  How can I configure my laptop up to be the same as the PC?  Thanks for any advice you can give... I'm lost :-(

    Try scanning from your Mac. Use Image Capture app in your Applications folder.

    Click once on the scanner on the left side, and then click Show details on the background. Along the right side you will see MANY options for scanning and recording.

  • Photosmart All in One Printer: HP C5280

    I have a HP Photosmart C5280 printer all in one

    I am unable to print printable discs as it happens with a massage saying a recognized authority as a device that gives direct printing on Cd/DVD discs.the printer works ok, except for printing to disc function

    I formatted my drive hard as I had windows errors 7 0n and found my C5280 everything works before I reinstalled windows and HP C5280 HP software software you Site.

    I hope you can help because it is a very good printer

    Hi @bluesman38,

    Welcome to the HP Forums!

    I see that you can not print on Cd/DVD discs with your printer HP Photosmart c5280 on Windows 7. And I'm happy to help you!

    Please see this post, Re: HP photosmart C5280 usually print on cd/dvd, by @GGtech. As well as this post, HP photosmart C5280 wont print on cd/dvd, to @Shane_R.

    Hope one of these solves your problem!

    "Please click the Thumbs up icon below to thank me for having responded."

  • color print, stopped my photosmart All in one printer c310. How should I do

    My printer has stopped printing in color

    Inke levels are varied but have green ticks

    HP All in one C310 Printer series

    Windows 7 64 bit

    Please check the ink levels... you use the original Hp cartridges? not charging?

    If they are authentic, not empty... can you pls. update your firmware: pls click the link:

    It's the last troubleshooting, if you replace your printhead still pending... I would like to know what happened

  • Printer HP Photosmart all in one printer scanner

    I can not get this camera to be my default printer.  It has been disconnected for a while and now has the yellow!.    I can get a different default printer but it is not what is wanted.

    Why do not all reinstall the printer?

    http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/printers

    below is a link to hp support

  • HP Photosmart all-in-One printer-D110a Installation failure

    After spending the better part of today trying to install this printer on my new Dell Inspiron 660 (Windows 7 Home Premium 64-bit), I'm ready to renounce HP printers.  This printer is less than a year and I had it installed on my old Dell Dimension, where he worked with the exception of not being able to to perform a scan of the touchpad.  A big disadvantage, since I had to go to the HP Solution Center and analyze manually.

    But let's go back to our days, I went through all the exercises on the HP support site, more than once, and installation has failed each time, "Fatal Error 1935" as well as MSI. Scan.  Since online search made me think that the 1935 FE could be a Windows 7 problem, I contacted Dell support.  Dell technology has been able to install the printer; He said that he install it in "compatibility" mode  How a normal user is supposed to know this?  There is something left on my desktop - PS_AIO_07_D110_Full_Win_enu_140_126.  I have to keep it?

    In addition, Scan always does not work since the touchpad.  Nor can I open the HP Solution Center.  It returns the message:

    "HP Solution Center cannot work because your device installation is not complete.

    Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

    If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the start menu. »

    I don't see any HP help files in my Start menu.  There is a HP folder in programs, filled with a ton of shit I don't need except for the simple instructions, basic to connect the printer to my pc.

    The installation has already been tried, more than once, with the Original CD.  The installation was already made, more than once, the option to download on the HP support page.  And with all the L4 uninstall, I probably restarted the pc more than 30 times today.

    And for growing more, my Temp folder is full of garbage, much of it with HP in the name of the file, as well as six 7z files *.

    To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

    First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

    In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

    find and install SOFTWARE to FEATURE FULL if it is available:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4023246

    Install and let me know the result!

    Have a great day and a great weekend!

    -Spencer

    PS you should not have to run in compatibility mode with the Win7 this softare, you have to do if the software you are trying to install is something like software WinXP (for example) on a Win7 machine.

  • 7525 photosmart all-in-one: printer says wireless, but do not print

    We moved our headquarters to a new location in the House. After you reconnect all devices, the printer seems to work (in his view).  Network test results "spent." When I opened a doc and tried to print, it would not, telling me printer was not in the network. Enter new password for ISP provider crossed wireless configuration. Still not printing.

    I uninstalled and reinstalled the printer. Still will not print. I disabled Norton Internet Security where he was blocking the process. I downloaded Team Viewer so that my son could see if he could help me, but couldn't connect to it to use it. I tried to download HPPrint and doctor to Scan, but it will not download. Any ideas?

    Hi there @MI_OHlady.

    Welcome to the forums

    I understand that you have moved your location of printers and it is not printing via wireless network.

    You mentioned that the print and Scan Doctor will not download, and this could be a problem on the computer or with the internet connection. Could try to use another web browser and try to download and run the printing and scanning Dr. again? I would like to know what are the results of the tool.

    Also, try to make copies of the front of the printer and let me know if they work, or if you see errors.

    I hope to hear from you

  • C4280 printer all-in-one: C4280 does not print

    Hi all

    I got this C4280 at a yard sale.  They said it worked, but he has not been connected over the years.  Without installing it, I tried to copy and it goes through the motions, sounds good, but nothing appears on the page.  I tried wiping and cook with the vapor cartridges.  It feels like the black, it is empty but there is no ink to color one.  Some came out when I steamed it.

    I installed the software and tried to clean without success.  I actually had a very light something out of the black cartridge but nothing about the color of one at all.  Ink levels show black as '? (probably empty) and color as most half full.  I would like to get something at least, no color?

    I have a few cartridges no HP on order, appear in the coming days. Can someone suggest that I try to copy, or give me some indication that this might actually work when installing the cartridges?

    Thank you!

    Hi @26kick.

    Welcome to the Forums of HP's Support. I understand that you have a problem getting to your printer. I would like to help.

    Lack of use could have damaged printheads. This could be the cause of the problem. Fortunately, the print head is integrated in the ink cartridges. Replacement of ink should solve the problem.

    You can also try to go through this document. Series of HP Photosmart C4200 all-in-one - output printed lines or scratches

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

  • HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

    Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

    Hi woodcarver60,

    Follow the steps outlined in the documents below to scan from the software.

    HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

    HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

    HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

    Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

    HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

    Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

    HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

    HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

    All-in-one printers

    Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

    Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

    Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

    Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

    Multifunction LaserJet printers

    Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

    Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

    Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

    Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

  • 7300 series all-in-one software does not load in windows 8.1

    I have a 7310xi all in one. I recently installed a new desktop running windows 8.1. the connection is wireless. I can get the printer to print properly but cannot load the software. I need the software to be able to scan etc. I downloaded several times, uninstalled and reinstalled and still get the same result (I purge the temp file after each attempt). Everything goes very well with the download until the actual installation screen comes up. Once I hit the installation I get the message "the system cannot find the file specified." I tried hanging the printer with a USB port and still get the same results. I tried using the Dominican Republic printing HP, the installation wizard and continue to get the same thing. If I could determine precisely what file is not found maybe I could find it. I made sure all updates are running on the computer and tried something that sounded even close, I can fing on HP website. Any ideas would be greatly appreciated!

    Thanks, Mike

    Hi Mike1949.

    Sorry for the delay. You'll need get corrupted files fixed before you can install because they are the source of installation problems. To do this, you will need to contact the manufacturer of your computer (IE. HP, Dell) to get help with the files.

    Let me know how it goes.

    Thank you

Maybe you are looking for