Photosmart Prem C310 install problem, printer is located on the wireless network but don't see iMac

Similar Questions

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• Photosmart C7280 will print a computer on the wireless network

  C7280 will print any desktop via a wireless home network. He has worked in the past, but stopped recently.

  It allows to print from a laptop on the same network.

  I tried to follow the procedures on the HP Support site and drivers, such as the routine HPHNDU.exe and others, but have had no success.

  I'd appreciate the help. My previous post in May has all the answers.

  Seems that the fatal error was not fatal as it appeared.

  I ran the HPHNDU again in exasperation, and it printed a test page. So, I printed another Notepad document just to be safe, and the printer now prints. There at least one test. It's good, but the scourge caused by the report "fatal error" doesn't exactly inspire confidence in HP Setup.

  I bet that it happened not when Carly was CEO.

  I'll call this resolved, although I don't know exactly what has been resolved otherwise than a very strange relocation.

  Thanks for your efforts.

  Furthermore, I never found a link to attach a file to a message.

• OfficeJet Pro 8600 Print more stuck in the wireless network that

  My windows computer uses XP with SP3.

  I recently installed this new printer / all-in-one. The printer is used in a business office. Earlier in the day, the print function works fine. The function scan and I works pouvons fax direcltly to the computer. I can print from my I phone. But then, without any error message printouts begin to get stuck in printing (QC)

  I can always print from my Iphone and I can always use the other functions (scan & fax). I can print to other printers on network.

  I noticed that hpnetworkcommunicator.exe runs twice in the Task Manager when this happens and I end a session to release sometimes draws. In addition, when this occurs I can restart the computer and which also enables the printer working properly again. When I restart the computer, I'm going to finish the rundll32.exe process I've ever had to do before installation of the new printer.

  I tried the HP print and doctor Scan and everything removed but she recommended that disable the firewall settings. I still have the problem with the firewall disabled.

  Thanks for any help.

  http://support.HP.com/us-en/document/c02817031

  Follow this document, sounds to me like you may have to uninstall/reinstall the printer software. Try reinstalling from the downloaded driver at www.hp.com under Support and drivers/Drivers and software. Good luck!!

• Canon MX860 will print over wireless network but don't scan (W7 OS)

  I have two laptops with XP and one with Windows 7 64 bit. Both connected to a router Wireless Linksys - internet connections well, feel very good on the two machines. The XP laptop will scan the network, but the Windows 7 laptop gets a dialog box of Scangear with this message: cannot communicate with scanner, for these reasons scanner is turned off scanner is disconnected. Have uninstalled and reinstalled all the software and drivers (with firewall disabled according to the instructions of canons), loads software successfully - but still no luck with the network scanning. Also downloaded Scangear tool - but when he's looking for the network printer, it does not. Support of Cannon says now there's an incompatibility with W7 and Microsoft can only solve the problem. Also noticed that the Canon IJ Network tool is loaded, but it does not work on W7 - new OK on the XP machine machine. Would appreciate any suggestions.

  Thank you

  John W

  If Canon say its not compatible with win7 is something for Canon to fix and not Ms

  Probably that you have installed drivers updated from the Canon site

• Print server attached to the new network, but do not find add printer printer

  After an upgrade to a new router (a Netgear N600 Wireless Dual Band Router WNDR3400), I spent a LOT of time trying to make everything again to talk with each other.  I've gotten to the point where all the wireless devices PC AND my WPS54GU2 print server are all properly connected (I can log in from another PC print server and print a test page).

  Unfortunately, I was completely unable to add the printer connected to the print server to the same PC that can open a session and ping the print server.  The wizard does not find just any network printer and when I type in the name of the server and printer I get the error message "the server for the printer"Print Server Null driver"doesn't have the printer driver installed."

  What I'm doing wrong here?

  BTW - I wasn't happy that I had to lower the security of the new router WEP wireless, or that it only took the key to SPELL as the paraphrase, but I also noticed that the print server was not a option for the safety of new protocols there was an upgrade of the firmware available.  Are there new print there servers work better with better security protocols?

  Thank you

  Craig

  If the installation wizard is not able to detect the printer connected to your print server. Make sure that the "printer" is correctly plugged into the PS and the Led for the same are lit on the PS.

  Second, you can try to configure a TCP/IP port to make the printer work.

  Start by defining a static IP address on the PS, and then set the TCP/IP port. The same link is given below:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=bb9993cc2c764dfab25dcb22d8eb0d35_4175.XML&PID=80&r...

  Then, this model does not support the WPA or WPA2 Personal. You can go for WPSM54g that supports both the level of encryption that I mentioned here. See the screenshot below.

  

• Want 5532: Printer cannot connect to the wireless network

  My desire 5532 impossible to connect to the network wireless after upgrading the firmware on the router. When you use the wireless on the printer configuration wizard, it cannot find the router. When I manually enter the SSID router and the password, it remains impossible to connect. It wasn't a problem before. Any help would be appreciated.

  Thank you

  Scott

  After updating firmware on the router makes you hard reset the router to its factory settings. Then reconfigure the router back to your configuration, do not use any file backup right? If this isn't the case, please do it first to get your fixed router. Reset the printer to the network settings, and then try again.

• My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

  I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?

  I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...

  What operating system?

  If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• Canon MP560 print over wireless network but don't scan (OS Windows XP Home edition)

  I uninstalled and reinstalled the software many times without success. I also called anon Help desk and after 45 to 1 h, still no luck. It worked when I had plugged USB but with wireless scan does not work, and also does not open MP Navigator. Any ideads or fix

  I now have my issue fixed. I called Canon Help Desk twice and each time they were on for an hour and more, after the second time, they said it was my pc that was the problem. Well, their after disable me my anti-virus several times and still no solution, after the last time, I discovered that even when I turned off my antivirus, it still doesn't work, then I realized that the firewall ESET NOD32 is always enabled. Then disbaled the firewall and then the software for my Canon MP560 was able to detect and to complete the installation. Now everything works fine wireless. After more than a week, it was something so simple, but with all the experts, telling me what I should do, it wasn't anything thay suggested, but something I thought was disabled with the anti-virus, but was not. So thank you all for helping me with this problem.

• can not print says printer connected to the wireless network but pc says printer is offline

  happened before the printer says connected to the network but pc says offline

  Ok

  Have you tried the Network Diagnostics to see you the network can see the printer

  Go to www.hp.com/go/tools

  Network Diagnostics has a link to the wireless printing site that can help out you.

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• My crasehd of the computer and I need to re - install Photoshop CS6.  I have the serial number but don't know where to find the download.

  Someone know where I can find the download for CS6?  I have my serial number but don't know where to find the file to download.

  http://www.Adobe.com/downloads/other-downloads.html can help

• Series HP Photosmart Prem C310: How to download the driver for Acer desktop computer

  I got my computer and I have a printer HP Photosmart Prem C310.  It works very well with my old laptop, but do not print with my new Acer desktop computer.  It is said that missing d driver and I need to download or use a disc to install it.  My computer does not have a place to insert the discs and whenever I try to download the driver it says that it can not be found.  All of the suggestions.  I can't print with my new computer to my old printer, even if the printer still works.

  pigletpsu

  Welcome to the Community Forum of HP.

  The Support Pages for the printer are apparently all in a tangle.  I can't, either.  Mutter, bang the mouse on the desktop...

  OK - that found replacing then you can install the full feature software.  The tire site it draws from HP.

  Make sure you take the download for PC and not for the Mac.  The smile.

  The download link is located below the list of operating systems...

  Software and drivers complete HP Photosmart Premium C310a

  As soon as the HP website is 'back', be sure go you back and grab a copy of your user's Guide.

  =========================================================

  Instructions for the installation and other pieces of interest - some will be useful when the Support site is returned:

  Install the full features software - printer

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart Premium c310 will not print from the photo tray. Market power does not work.

  HP Photosmart Premium c310 refuses to print from the photo tray.  I use an iMac.  I shot tray in and out, nothing.  I stoked market, nothing.  Whenever I try to print a photo, it pulls the main tray.  He doesn't even try to pull the photo tray.  And I select in the settings of Photo paper in the photo tray.  Oh, and I have never tried to print before photos.  This is my first time and it won't work.  Printing regular documents from the main tray works fine.   Can someone please help?

  Are you printing from iPhoto?  If so (and this may apply to other applications), you must specify the format and print size.  Make it look like this: