Photosmart Premium: printer

I am tring to connect my Mac to a wireless printer. It is the first time I'm going wireless. So I obviously need a router.

Now, there is the device that Verizon provided to connect my Mac on the Web. I think it's a router, but when I was searching for the printer to a router he kept looking and searching and research. My best guess is that Verizon router is used to connect on the Web only, and I would need to buy a router to connect my printer and my Mac. Is this correct?

Hi @Judyth,

This could be correct! I think that Verizon offers sometimes a MiFi device, in which case you are right you need a router, it is possible that you have a modem that is WiFi is not supported, to some modems, but others do not. What is the name of the device that they provided? Maybe I can help you identify what it is and what it has offerings. You can also consider to contact Verizon and to let them know you want a router that supports WiFi.

If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

If you need help from me, feel free to post back and I'll do everything I can to help. Thank you.

Tags: HP Printers

Similar Questions

  • Photosmart Premium printer/Scanner will not print

    I just bought an iMac and have installed the latest HP driveres for my Photosmart Premium, but it seems that there is a kind of shipping between the two problem.

    When something I send to the printer (and I tried a number of different software applications) it seems to take a long time to buffer, or simply not print at all.

    I noticed a page or a towing cost about when printers go into energy-saving mode this can be a problem, but I can not disable the mode, there is only 5 to 15 minutes to choose energy-saving.

    I seem to be able to bypass sometimes by unplugging the USB cable to the back of the computer and by him plugging in again, I guess that it wakes up the printer.

    can anyone give me ideas on how to address this issue.

    T

    OK, thanks for the clarification.

    Click the icon Apple and chicken software update.

    Any update HP is available?

    If so, be sure to install it and then check for any improvement.

  • How to disable wireless on a Photosmart Premium printer

    I just bought a HP all in one Photosmart premium in the hope of setting up wireless in my office; Unfortunately, implementation of the company does not allow me to do and I can only put up with the USB cable. How can I turn off the wireless? I cannot find a command in the touch screen to do and don't see anything in the manual either. Thank you!

    There may be a button (under the blue light nearby).  Or it will be in Setup > network > Wireless Radio.

  • HP Photosmart premium printer that disconnects constantly with my wireless setup.

    My Photosmart printer disconnects constantly.  I have to go to the Wireless Setup Wizard to bring him back.  I use a laptop HP pavilion dv6-321.  I also have 2 dell desktop computers that are connected is the same too.  I'm using Comcast as my ISP and have a Cisco's Linksys wireless router.  Can anyone help?
    Thank you.

    Hello

    1 did you change on your computer before this problem?

    2. what operating system is installed on your computer?

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    Follow the suggestions and see if it helps.

    "Method 1".

    Follow the steps in the article.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2

    Check to see if the problem exists in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    See also:

    Network printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    (For Windows 7)

    Previous post your answer for you help in this matter.

  • Quicken willnot print to my new HP Photosmart Premium printer

    My wireless printer works fine with everything except Quicken. Unable to print anything from Quicken, noy invoices, reconciliations, reports, nothing!

    Thanks K-saul

    found a very easy way to make it work for my HP Photomsart C309a

    Reach

    Control Panel

    Printers

    Right-click on the icon of the Photosmart printer

    Click on properties

    Click the Advanced tab

    Click print directly to the printer

    Press on apply and OK

    and who will do the trick!

  • Photosmart premium printer/C10: print jobs continue to repeat

    Printer prints work then repeat 2 or 3 times if I have to cancel the print job after the first printing.  Waste a lot of paper.  A second different print job takes up to 5 minutes to start.

    Hi @maggie154,

    I see that you are going through a lot of paper through a print job that keeps printing. I'd be happy to do everything that I can to help put a stop to this!

    We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.
  • Photosmart Premium printer does not print

    Model number C310A E-all-in-one

    My documents all spots and will not print. I checked all the cords, etc. I turned off the printer and restarted. I turned off my computer and restarted. I have Windows 7.

    Help!

    Thanks for your quick response. I downloaded the doctor and the printer works now.

    Concerning

  • HP Photosmart Premium C309g do not print black ink

    Hello

    My HP Photosmart Premium C309g (CD055A) will not print black ink even if the cartridge is full. He's going through the motions of printing but the pages come out blank. It prints colors, they are not as dark as before, so I know that black is not working. I have cleaned the print heads, turned off the printer, unplug the printer, restarted the computer, but nothing works. I get colors on the report of the print quality, but the printer status report comes out blank. I bought a new black ink cartridge (564XL) think the previous one was defective (levels showed a 75% ink) but I still have the same problem. Any suggestion would be appreciated. Thank you.

    Hey,.

    I see you have done some troubleshooting on the issue of the print quality that you are experiencing.  I would make sure you did all the troubleshooting steps available for your research problem in the document following the link.

    Print colors are the colors should not when the C309 Photosmart Premium printing.

    If you have completed all these steps, then I check the status of your printer warranty.  If it is out of warranty, you should consider the solution provided by Bob_Headrick in the thread found here.

    Hope this helps,

    Jason

  • Photosmart Premium ink cartridge stuck on the right side of the printer.

    I have a HP Photosmart Premium printer, the ink cartridge is stuck on the right side of the printer. Keep receiving an error message that says: "remove paper jam and then press ok.  I did all the steps to clear any torn or ripped from the inside of the printer paper, there was never any paper in there for blocking up inside anyway. When I opened the top of the printer my container of cartridge will not move at all, he's stuck.  It won't control the printer or by my own doing when the printer is turned off without being able to. The error and lack of time with my printer cartridge do not allow me to use the printer, I hope you can help me in anyway possible. Thank you.

    It seems you have a carriage jam. Sometimes it can be a sensor that is bad and can not work properly. Here is a link that will help to transport jam

    http://support.HP.com/us-en/document/c01815807

    I would like to know if it works.

  • PhotoSmart Premium C309n-s stalls (' is blocked-Up ')

    I use my new Photosmart Premium C309n-s all-in-one printer with my new iMac i7.  The stalls of the printer, or 'hang up', sporatically when I go to print from Apple Mail or a Safari Web page.  I reinstalled the printer by using the update driver is indicated on the page of HP support for the printer, but the printer still stalls or hang up.  After a few minutes, sometimes in makes the large number of minutes, the printer ends the print job.

    I have the printer on my home network, using a new D-Link router, and the printer is connected wireless.  The other computer on the network (a computer Windows Vista) and another (HP C6180 all-in-one) printer work fine, so the problem is between my Apple iMac, the Photosmart Premium printer and perhaps the router.

    If I do a test print through the iMac Photosmart printer, it prints immediately without any problem.  I also noticed that if I need to print multiple jobs, after the 1st print job hangs up and finally print, the next print jobs print immediately without delay.

    Any ideas on how to solve this problem?

    Saul

    I think I solved the problem of "hang up."

    I deleted the printer in the printer settings file and reinstalled the printer a Bluetooth printer, rather than a network printer.  I printed several times from Apple Mail, Safari Web pages and from Microsoft Word for Mac.  Everything looks good... without complex.  I also checked to make sure that my other computers (PC) can still access the PhotoSmart Premium printer from the network, and they all work ok.

    This morning I received an e-mail from HP support, but support suggested that I have remove the printer software and reinstall the software.  I tried this before and it does not solve the problems of hang up... so I chose to ignore the advice of HP.

    It seems that there is some kind of conflict between my shared printer on the home network and my iMac... which was then solved using Bluetooth to access the printer from my iMac.

  • What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

    1 HP Photosmart Premium all-in-One Printer (309 (a)

    2. Windows Vista 64-Bit family

    3. the general printer error 0x61000f6

    4. no change known to printer before developed problem

    0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.

    Let me know if it helps.

  • Windows 7 driver for printer / photosmart premium

    I installed windows 7 on my hdx 16 and I need drivers for the printer / photosmart premium 309 c. Someone at - it a chance for the two to work together?

    Thank you

    Russ

    I downloaded version 13 and have tried to install/uninstall several times. This includes the removal of the printer devices and Device Manager. When I try to reinstall I usually get a fatal error during 'configuration', the last step. I can print to the printer and I can run most of the photo. The center of solution won't work, which is a key piece of software for this printer. Any ideas?

    I'm running Windows 7 Ultimate (not beta). This software is properly installed on virtual xp but I prefer to run from 7.

    Thank you

    Message edited by russ1 on 10/14/2009 12:15

  • Extremely slow printing wireless with HP Photosmart Premium C309g-m

    I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.

    If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.

    Printer: HP Photosmart Premium C309g-m
    Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
    OS: Mac OS X 10.6.2 with all available updates installed
    Method of connection: cable Ethernet connection to the router wireless
    Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
    Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
    Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

    IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

    The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.

    Attempt to use:
    1 reboot and power off, wait, restart the computer
    2 reset the print subsystem, the printer off and on again and reinstall the printer

    3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.

    None of them worked.

    I don't know exactly what is happening... I'll have to think about.

    Looks like you're running with the current configuration.

    Can we call this resolved?

  • Photosmart Premium 309 a won't print black

    My Photosmart Premium 309 a printer will not print black text. Just imagined colors.

    I tried new cartridges (twice - at great expense!) head cleaning, cleaning deep head, aligning the head and tried to soak the printhead in hot water several times now and then cleaning and deep cleaning again and then yet another new series of cartridges, still no black - not a pinch!

    Would it be a mistake to electrical connection with the contacts? Or is the print head itself a goner - seems such a simple plastic device, ok electronics in contacts can be more complex, but not much to go wrong.

    I don't think I have done something to damage the print head when the occurreed first problem, but with all the plug and put back and soaking in hot water (let dry naturally) I can't guarantee that it is not damaged because, although I was careful and everything seems ok.

    I am also puzzled as to where ink is going on because the black cartridges I used trying to solve this problem have certainly been empty but the ink is not reaching the paper - looks like the blooming thing could swim ink now but it seems pretty clean!

    Any advice welcome.

    Hi @StuartG48UK,

    Welcome to the Forums of HP Support! I read your post and see that the black is not printing. I want to help you.

  • HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

    Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

    Thanks, it worked!

Maybe you are looking for