Photosmart wireless B110a: cannot ePrint

Similar Questions

• Photosmart wireless b110a all in 1 printer on Windows 7

  Hello!

  I need help with the problems I have with my laptop HP G62 is not connecting with my Photosmart all-in-1.

  I had a lot of problems involving a driver goes missing everytime I turn on my laptop, which means that I can't use my printer for printing or scanning.

  I followed the instructions via the website of HP, downloaded all updates & have done the "HP solutions for installation on Windows 7 errors"I did it several times, and one or two times, it worked, until I turned off the laptop. "

  I recently uninstalled it for the printer, & then re-installed, only to have another pop error message - up is to say that the program is not recognize my version of Win 7 & check that its true!  I can add that the version of Win 7 on my laptop IS authentic because it was already installed when I bought new in 2010.

  Is that what I can do to fix these issues?  As soon as, I will seek for new job & having a working printer will help of course.

  I'll look forward all solutions

  Thank you

  NTANGOUKANI

  NTANGOUKANI, sounds like you have a problem with the printer drivers. Now, when you say that after you turn on the computer the drivers are gone. Do you mean that the printer is no longer listed in devices and printers, you cannot print to it using a program, is it removed from programs and features or all of the above? Have you had any other problems with the software on your computer? This could be a problem with the OS, just look at the symptoms.

  Well, first we will remove the software and reinstall it using my preferred method. This will ensure that we are both on the same page.

  
  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• INK CARTRIDGE 364 (BLACK) DOES NOT MATCH THE HP PHOTOSMART WIRELESS E-ALL-IN-ONE PRINTER

  AT THE END OF THE YEAR, I BOUGHT THE HP PRINTER PHOTOSMART WIRELESS E-ALL-IN-ONE (B110A).  I REPLACED THE COLOR (364) CARTRIDGES, BUT THE CARTRIDGE BLACK (364), I BOUGHT IS NOT SAME SIZE ONE PROVIDED WITH THE PRINTER, IT IS MORE SMALL AND DOES NOT FIT IN THE SLOT.  DOES ANYONE ELSE HAVE THIS PROBLEM?  NOW PRINTER CANNOT USE AS BLACK IS EMPTY AND CANNOT REPLACE IT AS THE 364 PROVIDED WITH THE PRINTER IS DIFFERENT FROM THE PURCHASED SEPARATELY.  VERY FRUSTRATING.

  Thank you

  KERRY

  Thank you Carolyn.  I'll get to watch the 564 cartridge.  Thank you very much for your hope to answer that I can get this resolved otherwise it's back to the PC with the printer world for a refund!

  Thank you

  Kerry

• HP Photosmart Wireless e-All-in-One Printer series - B110

  Hello

  I have the above printer and I m finding difficulty in ordering ink cartridges.

  The available cartridges are:

  HP Photosmart Wireless e-All-in-One Printer series - B110a

  HP Photosmart Wireless e-All-in-One Printer series - B110b

  HP Photosmart Wireless e-All-in-One Printer series - B110c

  HP Photosmart Wireless e-All-in-One Printer series - B110d

  HP Photosmart Wireless e-All-in-One Printer series - B110e

  I don't know the one to choose. Can someone help me choose the right cartridge please.

  Thank you

  Presho

  In the United Kingdom, the cartridges would be 364 series.  You can order black, cyan, magenta, yellow or pack combo with three cartridges.  The cartridge photo and four packs of color with the photo cartridge are not applicable for your printer.

  You can also use the XL 364 cartridges, they have more ink at a higher price, but at a lower cost per page.

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• Photosmart wireless e - all in the habit a B110 series printer to connect to the laptop

  Hi, my laptop and printer are connected to my network, they don't connect with each other.

  Never had this problem before, can help you, thanks a lot

  Thanks for getting back to me brummyspud

  1. Please uninstall the printer then: uninstalling the printer software
  2. Restart the computer
  3. Reinstall the printer from the download: HP Photosmart Wireless e-All-in-one printer - B110a Driver download

  Let me know if that solves the problem

• Print Spooler service is not running (could not install printer) hp photosmart wireless with

  Print Spooler service is not running (unable to install printer) hp photosmart with wirelessprint spooler service does not not (impossible to install printer) hp photosmart wireless with

  Hello

  · What is the model number of the computer?

  Try not the link below and check if it helps: you encounter printing problems, display the printer icons and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer: http://support.microsoft.com/kb/919750

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• Series HP Photosmart Wireless e-All-in-One B110. I can't install the driver and software

  Hello

  I formatted my computer and reinstall windows 7 64 bit, I reinstalled many software (windows office and so on...), but I can't not reinstalled driver software for my printer Hp Photosmart Wireless e-All-in-One B110 series. When I insert the original cd of HP at the start of the installation but after 1 minute is displayed error

  

  I downloaded the dirver software from HP Web site, I tried to install it, but pops up the same error

  What can I do?

  Thank you

  Hi banzafa,

  I see that you get a runtime error when trying to install your software, and you have recently reinstalled WIndows 7 64 on your PC. Please follow the steps below and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_enu_140_126.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Wireless Manager cannot connect to 3G T-Mobile provider

  Hi @ all,

  I test the Toshiba Wireless Manager 5 (5.2.1047.66) on Windows 7 RC1 64 bit and I have the problem, that the Toshiba Wireless Manager cannot connect to T-Mobile. He always timedout while trying to connect.
  I don't see why. If I use a numbering Windows connection then I'll connect to the ISP network.

  does anyone have an idea?

  Kind regards

  Alen Ahja

  Hello

  The profile used is taken from your provider's SIM card - do not try to create one yourself. He usually works with the settings.

  Try this:
  1. disable the 3 G module and exit the Wireless Manager.
  2. wait 5-10 seconds.
  3. turn on the 3 G module, and then open the Wireless Manager.

  Should work?

  I have the problem that the module disconnects after a while. After it is not possible to reconnect because the Wireless Manager does not respond or I get a problem of downtime as yours.

  See you soon
  Kingkiwi

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart b109n-z: Photosmart wireless b109n-z pilots

  I am trying to download the driver for my printer Photosmart wireless b109-n-z. The wizard detects the printer, but then crashes with the message "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "and not going anywhere.

  I saw a recent request for the driver to a different printer for someone who was having the same problem as me with the HP Web site.  The problem was solved by a direct link to the download.

  Confidence that you can do the same for me.

  Thank you in advance.

  The HP website for driver downloads is back and runing properly, you can download the latest drivers for your Photosmart b109n-z from HP here.

• fake disconnected ' HP Photosmart Wireless B109n-z. ' message

  Hi all

  Using the center of HP sollution, I see the message offline wireless HP Photosmart B109n-z.

  However, I can print, I can see the cardriges levels filling and I have no problem to reach the printer via IP address.

  However, this issue would prevent me from scanning documents.

  I already reinstalled the app once, but it was a disaster even more great, even scubber not having to uninstall the HP printer software.

  Any ideas?

  GRZ

  Hi there @robhoe

  Welcome to the community

  It sounds to me like driver installation has not filled completely and correctly on your system Windows 8.1, which could be the reason why you do not have the scanning features in the software.

  Please make sure you that the printer will make copies before make you any software troubleshooting, as if there is a problem copying (printer hardware problem), the installation will most likely never complete successfully.

  I know you tried a scrubber, and that's what I would try again to remove completely all the components of your PC printers and then reinstall them later. If you want to give a shot of this, I'll post all the steps below for you to try!

  1 run this cleaner tool to remove the printer files. Use only an uninstall of level 3.

  HP Officejet software and driver removal utility

  2. restart the computer entirely to complete uninstallation.

  3. download and run the installation of your PS B109: HP Photosmart Wireless all-in-One Printer series - B109 Full Feature Software and Driver

  I hope this works, good luck!

• wireless client cannot see wired - WAG320N

  Hello

  my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

  Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

  What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

  help pls!

  Hi again,

  I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

  Sorry cisco...

  thx for your help guys!

• Cannot use our new HP Photosmart B210e printer wireless with HP ePrint server.

  We bought a new printer HP B210e for our House to be able to print wireless smartphones, laptops and desktop. The first problem was that our main office, which is about 3 years old and under XP would not find the wireless printer. I contacted HP and after several hours, they changed my desktop to be able to see the printer. Alongside this, they configure the printer to have a fixed ip address.

  It worked well, but I still cannot print from the photo tray. My wife's office has also had the same problem, but we will stop using this office. Not something we want, but she has a laptop computer.

  The main feature that we wanted to use had to be able to send an e-mail to our printer through the HP eprint center. Who has worked on the first day, we have signed, but has not worked since. It seems that our printer cannot connect to the HP eprint center at all. We can send e-mail to our printer through the eprint server. We can see that the e-mail message has reached the server, but the server cannot transfer the email of the printer. We check the Setup wireless on our printer and it is correctly connected to our home network and I can print wireless from my office.

  We're fast approaching the decision of the printer to where we bought it. We do not want to, but have no choice unless we can understand how to print from our smart phones.

  So I ask for help with the printer or a recommendation on which printer you can buy that actually work on our network wireless home. I tried to find what printer is best for this purpose on the Internet but find that there, the information is just too complicated for us to make a decision.

  PS: I see too many complaints about the HP ePrint Center, but very little about HP trying to fix or even acknowledge that they have a problem. I think they do!

  I can't comment on the ePrintCenter (maybe it's temporarily down?) but I know that your printer is capable of printing from an iPhone or an iPad... your smartphone you happens to be an iPhone 3GS or 4? If so, you can use the last iOS4.2 that supports AirPrint and print directly to your printer. As long as your iPhone and your printer are both connected to the same network, that is. I hope this helps.

• Photosmart wireless 6510 works very well, but how now to enable web services & eprint?

  New wireless photosmart 6510 works well with my laptop (Windows 7) to home & router; How can I activate the web & eprint services NOW? During the initial installation, I was short of time and I think that the antivirus intervened and I don't have a printer email address. He said that I could do it later - how? When I use the Web Services Panel to printer it tells me that I am not connected to the server.

  Is there a pure easy way to add web services now without upsetting my wireless network settings?

  bjhulse22,

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. print a Configuration Page from network network printer or wireless menu.

  (Select the wireless icon, select 'Settings', select "Display Network Configuration", select "Print Info")

  2. open a Web browser and type the IP address of product (from the network Page of Configuration) in the address line. The HP - Embedded (EWS) Web server should open.

  3. click on the tab 'Network' (in the top menu), then click on the 'Networking' link (in the left menu), then click on the link "network address (IP).

  4. click on the small round button next to the "Manual of intellectual property", then fill in the fields with the information from the Page of Network Configuration (IP address, subnet mask and default gateway).

  5. under "Setting up the DNS addresses", fill in the fields with the following text:

  -Preferred DNS: 8.8.8.8

  -Alternate DNS: 8.8.4.4

  6. click on the "Apply" button and the settings must be updated. Once the settings are updated, turn the printer off and then back on.

  7. try to reactivate Web Services.

  Let me know if you have any other questions, please!