Physical channel selected does not support the type of output required by virtual channel

I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

Hi Paul,.

Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

-John

Tags: NI Software

Similar Questions

  • Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

    I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

    I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

    "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

    Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

    Should I call one function other than DAQmxCreateAIVoltageChan?

    If so, what is it, or where can I find the reference for these functions?

    Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

    DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

    Thanks in advance for your help

    -Alas

    I thought she 372251a. PDF

    Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

    Second, you can't just ask for a sample single channel - ask for 2 samples instead.

    -Alas

  • error message indicates that the new 450 turbo label printer does not support the type of paper 119

    error message indicates that the new 450 turbo label printer does not support the type of paper 119

    Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

  • Windows Photo Viewer does not support the type of file or must be update error

    I can't open some files. They say the picture Veiwer only market not supported file type or must be updated. Where can I get help with this? Or you can change the file type to a file supported by wild poliovirus?

    Try to install Windows Live Photo Gallery that supports different image formats.

    http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started

  • Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

    Hello

    Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

    List of paths esxcli storage nmp
    SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
    The Runtime name: vmhba0:C1:T1:L0
    Feature: naa.600508e0000000007abafa971050a900
    Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
    Group status: Active
    Table priority: 0
    Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
    Path selection policy path Config: {current: Yes; favorite: Yes}

    FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
    The Runtime name: vmhba2:C0:T3:L2
    Feature: naa.60050768018105afc000000000000df0
    Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
    Group status: Active
    Table priority: 0
    Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
    Path selection policy path Config: {current: Yes; favorite: Yes}

    Kind regards

    Surya

    Hi Surya,

    No, it's not any problem with the configuration of your path.

    It only means that this policy does not allow additional configuration.

    I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

    Your current configuration does not offer this option.

    Kind regards

    Ralf

  • Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

    The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

    The properties of the file are:

    3GP.PNG

    Hyper Text Transfer Protocol

    TYPE: A PNG Image

    How can I fix?

    The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

    The properties of the file are:

    3GP.PNG

    Hyper Text Transfer Protocol

    TYPE: A PNG Image

    How can I fix?

    Windows gives you integrated programs to open the image as png files.

    In Vista, use Windows Photo Gallery to open png files.

    In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

    If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

  • Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

    Original title: WMP "can't play wav or midi.

    Using WMP 11 on Windows XP SP3.

    Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

    I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

    Thanks for your reply.

    I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

  • Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

    Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

    Ask the question in the Apple Forums:
    https://discussions.Apple.com/index.jspa

  • Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

    Windows media player

    HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

    Hello

    ·         What is the format of the files that you play when you get this error?

    ·         Do you get what this error during playback of all files or a particular file?

    You may encounter this error message for the following reasons:

    1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

    2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    You can try the steps and check if it makes a difference.

    a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

    b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.

  • Unable to play the video file. Error: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

    When I try to play a video file from youtube with youtube downloader in windows media player, I downloaded, it gives me the error message that Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. I have x direct sdk installed and my os is vista.

    Problem solved, I downloaded the fix wmp and it worked

  • Windows Media Player is unable to read the file. The player might not support the file type or does not support the codec used to compress the file.

    original title: Media Player

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. Need help trying to download music to my media and play, but he used... Someone help me find what kind of support I need for her... IM using kick * torrents to download music

    Hello

    you ask for problems downloading music through torrents like this is a good way to pick up malware

    You can try the 3rd party Codecs.

    http://www.SnapFiles.com/get/k-Lite-full.html

    for music issues repost in the Sub forum.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound?page=1&tab=all

  • Error when you try to play the downloaded tracks: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. (((PLEASE HELP)))

    I understand that this has been a matter of repetition and I made the suggestions listed and nothing works. This just started happening, although downloading songs, and once they are finished I'm not able to play them with Windows Media Player. The initial message indicates that the file has an extension that is not recognized by Windows Media Player.


    I have a Dell Inspiron Laptop with Windows Vista Home. Any suggestions? What should I chahnge how I download and save music?

    Hey Taylor09,

    You may find that you are getting this message in Windows Media Player due to one of the following reasons.

    a. you try to play a file that is not supported by the player.

    b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.

    Step 1:

    Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.

    Information on the types of media files that supports Windows Media Player

    Note that if you tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    Step 2:

    Download the necessary codec to play the file.

    For more information of Codec, see: Codecs: frequently asked questions

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows media player 11 on downloaded videos error "cannot read drive file does not support the file type or does not take in charge the codec used to compress the file.

    • now that the full version of k'lite seems to stop what is happening why hasent windows incorporated something similar in the windows media player 11, or they have another type of codec full, we can use to make this.only so many people have the same problem .please can help you.

    Hi bbdunford,

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

     

    You may encounter this error message for the following reasons:

    (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

    (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    Windows media player will play only the files and videos only if it supports this type of file.

    Method 1

    Check if the video file format is supported by Windows media player using the link below.

    Information on the types of media files that supports Windows Media Player

    http://support.Microsoft.com/kb/316992

    If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

    Method 2

    See the link below for more information on the codec.

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when you try to modify or to open a video (WLMP) using Windows Live Movie Maker: Movie maker does not support the selected file

    WLMP does not open on windows live movie maker?

    Well I made a video Windows live Director and saved it but when I try to open it to change some more it is said "Movie maker does not support the selected file" but he should not let me because I did in windows live Director please help!

    I'm having the same problem, but if I double click on the Window media player file appears help!

    ================================================
    Right-click the. WLMP file and try... Open with / Windows Live Movie Maker...

    See the following article

    Windows 7 - changing the programs that Windows uses by default
    http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • File error Windows Media Player mp4 "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file"

    I got this error message when you try to play an MP4 video. Help please!

    Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

    You can try to download the http://www.microsoft.com/en-gb/download/details.aspx?id=507 Codec Installation Package

    If this does not work, you may need to get some third party software to convert MP4 video to the longer Windows Media Player video format supported like WMV, AVI in order to solve the problem

Maybe you are looking for

  • HP 15-r036tu - is the 1600 Mhz DDR3 RAM compatibility

    I have a HP 15-r036tu - I just want to know if 1600 Mhz DDR3 RAM is compatible with your laptop. The laptop has 1 single slot memory. When I run utility CPU - Z, it shows that the existing memory is of type PC-12800. Can I upgrade it to 4 GB to 8 GB

  • Windows install and WUDRIVER modules. DLL

    My installer of Modules of Windows does not work so I tried to re - register the windows update dlls.I did high cmd: net stop WuAuServThe Windows Update service stopThe Windows Update service stopped REGSVR32 WUAPI. DLLREGSVR32 WUAUENG. DLLREGSVR32 W

  • HP 5531:5531 want do not print on mac

    I can't send or .pdf documents to print. I get blank pages when I print from my Mac.

  • Photo editor overwhelming!

    Hi everyone, software of photo editor says "Unfortunately stop application.» When I location setting is disable application works well. How can I fix this problem?

  • Windows file extension keeps opening every 2 minutes?

    Windows leader continues expansion opening every 2 minutes, I have like 8 windows open automatically, how do I stop?