physical connection to the LAN address all zeros...

Similar Questions

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Satellite M100-165: connection to the LAN operarte correctly

  I have a Satellite M100-165 for about 2 years with the original Setup (win XP etc) and I make all updates.
  The problem is that the connection to the local network is working properly from the beginning.

  I can connect only if I set the NIC property "link speed & Duplex = 10 Mbps Full Duplex", but on some LANs operate at all.
  I appreciate any response.

  Thank you

  I'm a bit confused now. What you mean with connection to the LAN working correctly from the beginning? What is started for you?
  I can't believe that you declare on that now, two years later. Have you already tried to install recovery image and test it with the factory settings?

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• How to connect to the database for all reports EN

  Hello
  
  I've developed 100 reports in the client of the production, test purpose that I moved
  test client. How can I connect to the database for all reports at once?
  
  Concerning
  Thaer

  Hi Thaer,

  You can connect to the connection of database for all reports through the workspace of HFM.

  Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.

  Kind regards
  Srikanth

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.

• TCP/IP VISA RESOURCE (connection to the LAN) vs USB?

  I wonder if I should increase the number of USB ports, I have on my workstation or add a USB hub, or TCP/IP Lan connections can be as fast as USB connections? The first time, it seems that when you use the local network connected insturment that the answer is much slower when it is USB connected, but my workstation has sufficient TCP/IP and not enough connections USB ports.

  Thank you

  Kellen

  Personally, I have no trust USB.  I had too many problems with it.  Cables randomly edge.  Cables move around and that is why it is 'new '.  In a dedicated test rack that just sits there, it's probably fine. But you should definitely use a good powered external hub.

  But I prefer to go on the road to LAN, especially if you have LXI compliant instruments.  There is just something about the connection to your device via a web browser to make sure it's working properly.  And all you need is a good Ethernet hub and you can connect to a ton of instruments.  If you're not going this way, have the instruments on their own small network with fixed IP addresses.  It will make your life much easier.  If you need the computer on a corporate network, it is fine.  Just make sure you have 2 Ethernet ports.

  Yes, USB has a lower latency.  When the flow of data, LAN can play catch-up (at least with Gigabit).  There are advantages and disadvantages to both options.

• Localhost unreachable destination to the LAN address

  Windows Vista Home Prem / 2.1 Ghz/3 GB RAM AMD

  I'm having this problem where I am unable to access certain local IP on my LAN addresses. I have what I think are routes in the routing table, so I'm completely puzzled as to why I get inaccessible Destination. They seem to be generated by the output interface and I get only the message for some hosts.  Any thoughts would be IMMENSELY appreciated.

  routing table:
  ===========================================================================
  List of the interface
  16... 02 00 4 c 4f 4f 50... Microsoft Loopback adapter
  11.. 00 24 d2 06 5 b 4 b... Atheros AR5007EG Wireless Network adapt
  10... 1st 00 33 9 c 92 b5... Realtek RTL8102E Family PCI - E Fast Ethernet OR
  1 ........................... Software Loopback Interface 1
  18.. 00 00 00 00 00 00 00 e0 isatap.gateway.2wire.net
  12... 02 00 54 55 4th 01... Teredo Tunneling Pseudo-Interface
  19 00 00 00 00 00 00 00 e0 isatap. {1B026F0F-03DE-4F71-BFF6-DD768DB11D48}
  20... 00 00 00 00 00 00 00 e0 isatap. {B0F31E43-512B-499E-AAA1-E7828F7C5D43}
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 172.30.255.254 172.30.255.1 80
  0.0.0.0 0.0.0.0 192.168.43.1 192.168.43.101 25
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  172.30.255.0 255.255.255.0 on a 172.30.255.1 route 286
  172.30.255.1 255.255.255.255 on a 172.30.255.1 route 286
  172.30.255.255 255.255.255.255 on a 172.30.255.1 route 286
  192.168.43.0 255.255.255.0 on a 192.168.43.101 route 281
  192.168.43.101 255.255.255.255 on a 192.168.43.101 route 281
  192.168.43.255 255.255.255.255 on a 192.168.43.101 route 281
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on a 172.30.255.1 route 286
  224.0.0.0 240.0.0.0 on a 192.168.43.101 route 281
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on a 172.30.255.1 route 286
  255.255.255.255 255.255.255.255 on a 192.168.43.101 route 281
  ===========================================================================
  Persistent routes:
  Network gateway address mask network address metric
  0.0.0.0 0.0.0.0 172.30.255.254 50
  ===========================================================================

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  1 306: 1/128 liaison
  1 306 ff00: / 8 On-link
  ===========================================================================

  out of ping (work / does not):

  Ping 192.168.43.11 with 32 bytes of data:
  Reply from 192.168.43.11: bytes = 32 time = 4 ms TTL = 255
  Reply from 192.168.43.11: bytes = 32 time = 2ms TTL = 255

  inging 192.168.43.20 with 32 bytes of data:
  eply to 192.168.43.101: impossible to reach the Destination host.

  ipconfig for the relevant interfaces:
  NIC Loopback0 (172.30.255.1):

  The connection-specific DNS suffix. :
  ... Description: Microsoft Loopback adapter
  Physical address.... : 02-00-4C-4F-4F-50
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address...: 172.30.255.1 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 172.30.255.254
  NetBIOS over TCP/IP...: enabled

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : gateway.2wire.net
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-24-D2-06-5B-4B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  IPv4 address...: 192.168.43.101 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Wednesday, February 10, 2010 10:03:57
  End of the lease...: Thursday, February 11, 2010 10:03:57
  ... Default gateway. : 192.168.43.1.
  DHCP server...: 192.168.43.1.
  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  The loopback adapter is one that I use for an emulation program, and I've assigned a metric higher to the default gateway for the network. I tried to remove the route persistent this default GW (172.30.255.254), no change.  I don't understand why Windows reports no road, when there is clearly a in the routing table.  When I disable the loopback interface, there is no change.

  I deleted IPv6 on both interfaces, I disabled the firewall, both networks are on private networks. I'm out of ideas.

  Well as annoying as it is, my two old days, the countless curse-word problem has been resolved.  No matter how much you (think you) know, and no matter how much experience you have, always always ALWAYS check layer 1.

  I was sure that the server is connected to the network, but alas it was not.  What is real interesting here is that windows vista will report an inaccessible local address, even if it's a road.  Maybe it has to do with an ARP request failed?

  Feel stupid now.

• Portege R500 hangs / pauses during the connection through the LAN

  My Portege R500 is like that: when all using WIFI or 3G works fine but I would use LAN for best performance when he's at the office. As soon as the LAN cable is connected the machine starts making strange breaks for 1 to 2 seconds and I want to say break total, even the mouse pointer freezes on the screen. This happens every 5 to 10 seconds and stops immediately when you unplug the LAN.

  Someone at - it solution or an explanation for that? Hardware error? I have all the latest drivers from Toshiba, even the latest firmware for both the computer and the built-in 3G modem. No strange software or bad - one abnormal behavior is used, antivirus is Trend OfficeScan and standard Windows Firewall is used.

  Thanks in advance.

  / Magnus

  You can test at home or elsewhere? It will be interesting if the same thing will happen if you connect your laptop to the router at home.

  Have you talked about this with your local administrator?
  What you can try is to update BIOS to see if this will change anything.

• More than two devices to connect to the LAN ports and none can see Internet

  If I connect another router to my Netgear and use this another router by connecting four or five devices, all can see the internet and work very well. But if I remove this another router and connect these four devices to one of the ports on my Netgear modem/router, these devices each receive its own IP address (as expected), but NONE of THEM can access the internet.

  No idea why?

  Everything works fine. Note, please, that the Netgear modem/router has always worked well - the problem was with the flaky DNS server addresses provided by Comcst.

• Tunnel adapter connections to the LAN gone wild on Windows 7

  On my windows machine 7, ipconfig shows many tunnel adapters (some listed below).

  I disabled ipv6, netsh cmds attempted to disable the router isatap etc and restarted... but it does not help.

  Is there a reliable way to eliminate these tunnel adapters appears in ipconfig?

  Thank you

  Parag

  Card tunnel Local Area Connection * 50:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 42 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 51:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 43 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 52:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 44 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 53:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 45 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 54:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 46 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi Parag Blangy,

  . The computer is connected to the domain?

  I suggest that you follow the steps proposed by Nicholas Li from the link below:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/32b0c129-FA2D-431a-A275-4288c729605a

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My ASA cannot ping the lan address

  I use ASA built ezvpn.   I can access the ASA and ping inside port address successfully.    But in my ping to the address of interconnection 10.100.255.2 window7 cant.     I don't know how to solve the problem.  If all goes well, can help me. Thank you...

  set it up

  ASA5520 # sh run

  : Saved

  :

  ASA Version 7.2 (3)

  !

  asa5520-host name

  sxng domain name

  activate the encrypted password of DOAXe2w/ilkXwCIz

  names of

  DNS-guard

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.248

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  IP 10.100.255.254 255.255.255.0

  !

  interface GigabitEthernet0/2

  nameif dmz

  security-level 50

  IP x.x.x.x 255.255.255.0

  !

  interface GigabitEthernet0/3

  nameif wireless

  security-level 10

  IP x.x.x.x 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  management only

  !

  2KFQnbNIdI.2KYOU encrypted passwd

  Disk0: / pix723.bin starting system

  passive FTP mode

  DNS server-group DefaultDNS

  sxng domain name

  dmz_access_in of access allowed any ip an extended list

  dmz_access_in list extended access permit icmp any one

  tunnel of splitting allowed access list standard 10.0.0.0 255.0.0.0

  inside_nat0_outbound list of allowed ip extended access all 10.100.254.0 255.255.255.0

  inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.100.254.0 255.255.255.0

  outside_cryptomap_dyn_20 list of allowed ip extended access all 10.100.254.0 255.255.255.0

  acl_out list extended access permit icmp any one

  acl_out list extended access permit tcp any host x.x.x.x eq www

  acl_out list extended access permit tcp any host x.x.x.x eq 9000

  acl_out list extended access permit udp any host x.x.x.x eq 9000

  ........

  ......

  acl_out allowed ip extended access list any 10.1.1.0 255.255.255.0

  inside_access_in list extended access permitted tcp 10.1.10.0 255.255.255.0 any eq 5000

  acl_inside of access allowed any ip an extended list

  acl_inside list extended access permit icmp any one

  wireless_access_in of access allowed any ip an extended list

  wireless_access_in list extended access permit icmp any one

  pager lines 24

  Enable logging

  timestamp of the record

  emergency list vpn-event logging level

  log message 109001-109028 vpn-event list

  log message 113001-113019 vpn-event list

  exploitation forest-size of the buffer 5000

  information recording console

  debug logging in buffered memory

  recording of debug trap

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 dmz

  MTU 1500 wireless

  management of MTU 1500

  IP local pool vpnpool 10.100.254.1 - 10.100.254.250 mask 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow all outside

  ICMP allow any inside

  ASDM image disk0: / asdm - 507.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (outside) 1 x.x.x.x

  Global (dmz) 1 10.100.253.101 - 10.100.253.200 netmask 255.255.255.0

  Global (wireless) 1 172.16.255.101 - 172.16.255.200 netmask 255.255.255.0

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 10.1.1.14 255.255.255.255

  NAT (inside) 1 10.1.13.100 255.255.255.255

  NAT (wireless) 1 172.16.0.0 255.255.0.0

  static (dmz, outside) tcp x.x.x.x www 10.100.253.1 www netmask 255.255.255.255

  .......

  .........

  static (inside, dmz) 10.1.1.11 10.1.1.11 netmask 255.255.255.255

  static (inside, dmz) 10.1.1.16 10.1.1.16 netmask 255.255.255.255

  static (dmz, external) 10.100.253.20 x.x.x.x 255.255.255.255 netmask

  static (dmz, external) 10.100.253.32 x.x.x.x 255.255.255.255 netmask

  Access-group acl_out in interface outside

  acl_inside access to the interface inside group

  Access-group interface inside acl_inside

  Access-group dmz_access_in in dmz interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Route inside 10.0.0.0 255.0.0.0 10.100.255.1 1

  Route inside 10.0.0.0 255.0.0.0 10.100.255.2 1

  Route wireless 172.16.0.0 255.255.0.0 172.16.255.1 1

  !

  router ospf 1

  255.255.255.255 network 10.67.180.0 area 0

  network 0.0.0.0 0.0.0.0 area 1

  Journal-adj-changes

  !

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  http 10.0.0.0 255.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  Crypto outside-dyn-map Dynamics-plan 20 reverse-drive value

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  Telnet 0.0.0.0 0.0.0.0 outdoors

  Telnet 10.0.0.0 255.0.0.0 inside

  Telnet 10.100.0.0 255.255.0.0 inside

  Telnet 10.100.255.0 255.255.255.0 inside

  Telnet 0.0.0.0 0.0.0.0 wireless

  Telnet timeout 10

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 30

  Console timeout 0

  dhcpd x.x.x.x dns

  !

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  enable dhcpd management

  !

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  Policy-map global_policy

  class inspection_default

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the icmp

  !

  global service-policy global_policy

  internal sxnggroup group policy

  attributes of the strategy of group sxnggroup

  value of server DNS 202.99.192.68

  enable IP-comp

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  username password sxtrq Y6cwK1wOhbhJ6YI / encrypted

  maboai R6eu6P1iKIwFIFjS username encrypted password

  winet FwZ0ghxvIpXOepvf username encrypted password

  tunnel-group sxnggroup type ipsec-ra

  tunnel-group sxnggroup General-attributes

  address vpnpool pool

  Group Policy - by default-sxnggroup

  sxnggroup group of tunnel ipsec-attributes

  pre-shared-key *.

  context of prompt hostname

  Cryptochecksum:119ae137eef5ed97d38b4e2f90ed46d7

  : end

  ASA5520 # route sh

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is 202.97.158.177 to network 0.0.0.0

  C x.x.x.x 255.255.255.248 is directly connected to the outside of the

  C 172.16.255.0 255.255.255.0 is directly connected, wireless

  S 172.16.0.0 255.255.0.0 [1/0] via 172.16.255.1, wireless

  S 10.0.0.0 255.0.0.0 [1/0] via 10.100.255.1, inside

  [1/0] via 10.100.255.2, inside

  C 10.100.255.0 255.255.255.0 is directly connected to the inside

  S 10.100.254.2 255.255.255.255 [1/0] via x.x.x.x, outdoor

  C 10.100.253.0 255.255.255.0 is directly connected, dmz

  S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor

  ASA5520 # sh arp

  outside 00d0.d0c6.9181 x.x.x.x

  outside 00d0.d0c6.9181 x.x.x.x

  outside 224.0.0.5 0100.5e00.0005

  inside 224.0.0.5 0100.5e00.0005

  inside the 10.100.255.1 0000.0c07.acff

  inside the 10.100.255.2 001c.b0cb.5ec0

  DMZ 10.100.253.20 60a4.4c23.3032

  DMZ 224.0.0.5 0100.5e00.0005

  DMZ 10.100.253.1 001a.6436.6df6

  224.0.0.5 wireless 0100.5e00.0005

  Wireless 172.16.255.1 0026.98c6.41c8

  

  

  

  Try to use the "crypto ipsec to show his ' command to watch the program and decaps packages, I hope this isn't too fast increment. You should be able to see the two increase when you successfully and only one side increase when it fails. Check both sides of the vpn, and this should give you an idea where the problem is. If the program packages are multiplying on the ASA local to your PC Win7 and Decaps multiply on the ASA Remote and the program is not so, then the question is with packets from the remote side. I hope this will help you determine the location of the problem and then you can focus your search here.

• Add the network connection of the Organization to all VMS in TIME

  I am tying to create workaround for the vCD.  When you deploy a VAPP model from a catalogue published in a different organization of the network of the organization does not automatically connect to the virtual machine if the VAPP model had its captured network settings.  Currently, this happens for us within Lab Manager and not in vCD.  Also, we must seize the networking that we use a closed/NAT model and it's too complex have our users configuration whenever they deploy a configuration.

  I don't know if it's the right way to go with this yet, but until VMware comes back to us, we will test this route.

  I have a workflow to get all of the virtual machine within a paralytic and problems by pulling their network settings.  If I can get that I can draw the organizational network for the organization that the vApp is in course and then assign it to each virtual machine.

  I don't know how we can use this, but I think we will make deployments of vCO instead of vCD or AMQP allows to listen to new deployments in the vCD and then the kickoff of this workflow to fix the vApps.

  If you wonder why we need this, we're a large store of LM and the 500 running the vApps by organization limit forces us to have more than one organization.

  Any help would be appreciated.

  Eric

  For a virtual machine to connect to a network, create a new workflow with a scriptable in task...

  Flow of work/Scriptable task entries:

  nicNumber (number)

  ipMode (String - must be MANUAL, POOL or DHCP)

  newIpAddress (String - only required if ipMode == MANUAL)

  Network (vCloud:OrgNetwork)

  VM (vCloud:VM)

  Output of the scriptable job:

  task (vCloud:Task)

  Script box: (I have a bunch of entries System.log under logging/troubleshooting - feel free to comment each line starting with System.log)

  vm.updateInternalState (); Update the current information...
  var networkConnectionSection = vm.getNetworkConnectionSection ();
  System.log ("Info:" + networkConnectionSection.info.msgid + "(" + networkConnectionSection.info.value+") '");
  System.log ("required:" + networkConnectionSection.required);
  System.log ("PrimaryNetworkConnectionIndex:" + networkConnectionSection.primaryNetworkConnectionIndex);
  var connection = networkConnectionSection.networkConnection;
  for each {(var connection in connections)
  If (connection.networkConnectionIndex == nicNumber) {}
  System.log ("NIC Match found...");
  System.log ("IP address:" + connection.ipAddress);
  System.log ("Current Mode IP:" + connection.ipAddressAllocationMode);
  System.log ("Connected:" + connection.isConnected);
  System.log ("mac:" + connection.macAddress);
  System.log ("current network:" + connection.network);
  System.log ("networkConnectionIndex:" + connection.networkConnectionIndex);
  Our changes here, the ipAddress property is only applicable if ipMode is MANUAL
  connection.ipAddressAllocationMode = ipMode;
  If (ipMode == 'MANUAL') {}
  connection.ipAddress = newIpAddress;
  }
  Connection.Network = network.name;
  connection.isConnected = true;
  }
  }
  Now apply the changes
  var task = vm.updateSection (networkConnectionSection);

  End of script task code

  Make sure you link all your variables and it may be a good idea to bind the attribute 'task' actionable 'VclWaitTaskEnd' before proceeding to other operations

• Unable to connect to the AppStore - tried all the patches

  Hi all, cannot connect to the App Store on my iPhone 6 running ios9.3.2

  I did a lot of research and have tried a variety of bugs including:

  log out and back in again

  change in the weather from automatic to manual and vice versa

  activate Touch ID then turn it back again

  reset the network settings

  still no luck! Really frustrating - are there any other tips and tricks I can try?

  Thank you!

  http://osxdaily.com/2015/09/03/fix-app-crashing-iOS/ Follow steps 1 and 2.

• Satellite Pro U300 - how to go if connected to the LAN WiFi

  How can I change my laptop to the wireless router, when you connect to the internet LAN?
  My laptop is Toshiba Satellite U300 pro

  Post edited by: marto_noa

  Unplug the cable LAN and switch ON the WLan.
  Usually the laptop would use the LAN connection if LAN cable is connected and LAN is active.