Picture of the events of clusters - change value and the mouse down

Hello everyone

I am facing a problem of triggering events using two arrays of clusters.

I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

Any suggestions?

The real VI is a little different from what I described, but the problem is exactly the same.

Thank you

Dan07

Like this:

Tags: NI Software

Similar Questions

  • Event Structure... the mouse down or to the cases of change of value

    I feel, it is a simple problem, but I can't seem to find a solution.

    I have a VI that is supposed to communicate with a stepper motor drive.  I'm working on the Boolean setting keys on the Panel before (acting as of the momentary switches) that will jog the hourly engine or counterclockwise, as long as the button is pressed.  Once the user releases the button, the motor should stop jogging.

    I tried to use the mouse down and value change event.  With the help of the mouse down, for some reason, the time-out occurs almost immediately even while holding the mouse on the button.  This translates into what seems like nothing is happening.  Although the engine receives all orders he has to run, it receives the stop command immediately after.

    Using the value change case, the procedure works and the motor turns, but when you release the button (another change of value), all orders of jog are returned to the engine stop control tracking.  Sometimes the motor continues to run after the shutdown command has been sent, and I think that might be involved because it receives all the shortening of orders (again) and the judgment of control both.

    Is it possible to cnage my case event to run the way I want to what he... Send commands to the button click on... Send different command button.

    Thank you.

    Thanks for the suggestion...

    I could solve the problem I had.  Previously, I was trying to display the timeout to-1 to a value greater than 0 to launch the timeout on a button release event.  To solve the problem, I just removed all of the code that has been changing the value of timeout and left the default to-1.  I also removed all the code in the case of timeout.  Then, I created a new mouse event that is fired by releasing one of the buttons and copied in the code that used to be in the case of timeout.

    Now, the works of VI exactly as I need to... where an event occurs on a mouse a click of a button and a different event happes when the button is released.

    A very simple solution, however I've only worked in BT for about a week and I have not seen the mouse event when I scroll to the event.

  • Only highlight when the mouse down on an object, but not when Rollover

    I want that selected area turns blue when I'm selecting with the mouse down (like the selected cells in Excel). I can do it with Captivate 5?

    Create three images (I use mostly PNG) and don't forget to label them in XXXXX_down XXXXX_up and XXXXX_over - when you replace XXXXX with the name you want, the rest is important to be exactly like that.

    Replace your current button with an Image button and point to one of these three images - CP will automatically associate the three of them to the appropriate button States.

    Take a look at the Gallery\Buttons in the folder of Captivate 5.5: you will see that all the buttons default image have these 3 versions corresponding to the States. It is not necessary to put your custom in this folder buttons, put together them in any folder you want and it will work, of course.

    Lilybiri

  • The Application of the filter node of event using the mouse down?

    Hello

    I have a question regarding the application of the filter nodes of the Mods and PlatMods event.

    With respect to the event "Button" filter node, I can change the response when I click on the botton, either for a right click or left click.

    The filter node throwing event is more common to use, it can provide the opportunity to reject the action of the set button.

    But now I can't realize how to use the node of the Mods and PlatMods event filter.

    I change the value of the double click event filter node, then what?

    Could someone give an idea or a suggestion? Example or scenario is preferred, thank you very much.

    There are several reasons why you want to change the action with the filter node. For example if you also have a key value changed event, you could turn a right-click (that normally would be open the contextual menu) with a left click then immediately triggered the value change event.

    Similarly, you might have a change of value and double click even for a listbox control. Then, you could add a fiterling event mouse that would make a single click (normally not trigering a change in value) in a double-tap for some values, but leave in one click for other values.

  • How to make the difference between the mouse down events in the control of the chain (click on contour vs click Center)?

    Hello

    I have a control over the chain on my UI and I would like to make the difference between mouse different events, that is to say, to be able to differentiate a click on the outline or the label of the controller vs right-clicking on the Center (between the control in "edit" mode)

    The reason is that sometimes if the user does click not in the Center but in the scope of control, Labview fires the mouse event down but the typed keys are not registered...

    Is it possible to distinguish the two?

    Thanks a lot for your help

    Set the string "update as you type" and use instead a "changed value" event Now, the event fires whenever a new character is entered.

  • What is the difference between the mouse down? and regular mouse down events?

    Look at the event, I see a labled:

    Mouse down

    And the other as:

    Mouse down?

    With the question mark at the end... What is the difference between the two? I do not see the difference described in the Help menu... it's LV 2011 version.

    Thank you

    Cayenne

    Joined another VI watch how an event filter is used to change how the mouse button seems to have been pressed. It's in the LV samples with some modifications made by me.

  • MOUSE_LEAVE to detect when the mouse down

    I have to be able to detect a MOUSE_LEAVE on now that the mouse leaves the scene no matter if the mouse is pointing DOWNWARDS or upwards. This seems to be impossible or a limitation in AS3. The MOUSE_LEAVE gets only sent if the mouse is in PLACE or when the mouse is released out of the scene. Is there an API like isMouseOutsideStage instead of using headphones that I can use instead? stage.addEventListener (MouseEvent.MOUSE_OUT) is not applicable because whenever my slide show changes pictures, scene MOUSE_OUT is sent which is not desirable. The code below works perfectly where it detects a version or version out if event.target differs from the myButton. The strange thing or maybe a bad behavior is that if I release outside the stadium, event.target is equivalent to myButton thus detect a "communiqué" instead of "liberation outdoors." I think that when we release the outdoor stage, the event.target want to be null. There is no other work around, I may think or find.

    myButton.addEventListener (MouseEvent.MOUSE_DOWN, {function(event:MouseEvent):void}
    MouseHandler.addEventListener (MouseEvent.MOUSE_UP, {function(event:MouseEvent):void}
    MouseHandler.removeEventListener (MouseEvent.MOUSE_UP, arguments.callee);
    if(Event.Target == MyButton) {}
    dispatchEvent (new ButtonEvent (ButtonEvent.RELEASE));
    } else {}
    dispatchEvent (new ButtonEvent (ButtonEvent.RELEASE_OUTSIDE));
    }
    });
    });

    I created a MouseHandler class that maintains Boolean values such as isDown tried isOnStage by assigning true MOUSE_MOVE and false MOUSE_LEAVE and added checking:

    If (event.target == myButton & & MouseHandler.isOnStage ()) {}
    dispatchEvent (new ButtonEvent (ButtonEvent.RELEASE));
    } else {}
    dispatchEvent (new ButtonEvent (ButtonEvent.RELEASE_OUTSIDE));
    }

    but it cannot work because MOUSE_UP is distributed everything first he uses isOnStage = true before isOnStage can be set to false on the MOUSE_LEAVE event.

    You can use:

    stage.addEventListener (Event.MOUSE_LEAVE, f);

    function f(e:Event):void {}
    trace (e);
    }

    stage.addEventListener(MouseEvent.MOUSE_DOWN,ff);
    stage.addEventListener (MouseEvent.MOUSE_UP, fff);

    function fff(e:MouseEvent):void {}
    stage.removeEventListener (MouseEvent.MOUSE_MOVE, ffff);
    }

    function ff(e:MouseEvent):void {}
    stage.addEventListener (MouseEvent.MOUSE_MOVE, ffff);
    }

    function ffff(e:MouseEvent):void {}
    If (e.stageX<0 ||="" e.stagex="">stage.stageWidth | e.stageY<0 ||="" e.stagey="">stage.stageHeight) {}
    stage.dispatchEvent (new Event (Event.MOUSE_LEAVE));
    stage.removeEventListener (MouseEvent.MOUSE_MOVE, ffff);
    }
    }

  • Web page scroll bar stops after the mouse, even while that pressed the button of the mouse down.

    1 left click to scroll the vertical scroll bar
    2. scroll up a little bit.
    3. the scroll bar then locks into position, IE moving around the mouse, but the scroll bar is 'stuck' and the window does NOT scroll.
    4. release the mousedown, then click on the scroll bar, and then it works again (until the next freeze).

    The gel is happening very quickly, i.e. within 1 to 2 seconds.

    Try to upgrade to Firefox 18 to check if it still happens with this version.

    • Help > about Firefox
  • can you change screen and keyboard/mouse out between 2 computers on the network?

    A question

    You can network together two computers one XP and a Vista running and be able to switch between the two using a monitor and a keyboard?

    I would use a KVM.  http://en.Wikipedia.org/wiki/KVM_switch

  • tlfText links - on the mouse down instead of click!

    Hello!


    by default, all hyperlinks within a 'tlfTexts' run on the 'CLICK' event (not MOUSE_DOWN).


    The problem is, if the tlfText scrolls, it is difficult for a 'Click' to dispatch event!


    So is it possible to change this default behavior to run links on "MOUSE_DOWN" ?


    Thank you very much

    Ali

    you need to create that yourself.  You can use a mousedown event getcharindexatpoint (mouseX, mouseY).

  • How to determine the Boolean value selected in a mouse down event pane?

    I have a lot of Boolean controls and indicators in my VI and I would determine what boolean is selected (left click) on a mouse down event pane.  Can I do this without having to specify each of the Boolean in the case of event configuration?

    Thank you.

    Jim

    If you get a ref to your Boolean all they have properties that define it location and size. Compare the location click with the limits of each boolean and where

    Left< click=""><>

    AND

    Back to top< click=""><>

    you have found the Boolean value that ended the click.

    It may be easier to use the Boolean refs table to create a dynamic event and then use the ref returned by the mouse down to get the label of the Boolean value that has been clicked.

    Have fun

    Ben

  • Click of the mouse on the chart without event management

    Is there a way to detect the mouse click on a chart without event management? My version of LabVIEW database has no events management features.

    Thank you

    Ryan

    Sweet justice.  Because you were a guy standing, my scorn is now much closer to 90/10.  They should really sign make an acknowledgement that you know what you get.  I don't think it's unreasonable to expect basic functionality, and IMO event Structures are pretty basic.  This is why I'm not in marketing.

    Time of experience.  It may be while you are unable to change the structure of the event, maybe you can run code that contains and edit around them.  Here, I use a structure of the event to a mouse event down to the chart.  Normally, I'd put the code inside the occurrence of the event, but maybe you can not change the inside.  Instead, I pass a boolean that is true when the mouse down event fired and pass out the XY coords as well.  You can do something within a structure separated from cases as I show.

    I would like to know if it works.

  • Follow an event in a graph with the mouse cursor 3D

    I'm trying to track events in a 3-d Surface chart. I need track the mouse down and mouse up on top of the slider. Mouse works fine, but when I drag the cursor and let, mouse event does not get the subject of a follow-up, and I have to click the mouse button once to catch the mouse event. Any suggestions?


  • Kill the MouseEven.CLICK event when the mouse is held down?

    I studied games on Facebook and trying to emulate mouse events management. For example, in ChefVille, you can click on the objects and drag them around. But if you hold the mouse down you pan all the game environment and when you release the mouse button a click is NOT on the object under the mouse. In my tinkering the click event will be triggered by the release of the mouse button, no matter how many time keep the button pressed. How can I keep the trigger CLICK event if the mouse is held down for a certain period of time?

    I don't know that you can cancel a CLICK event in the middle of what is happening (click = MOUSE_DOWN followed MOUSE_UP), but you can start a timer on the MOUSE_DOWN event and its event handler to set a Boolean variable that can make your event HANDLER function used to decide or not to treat a CLICK event.

  • events of the mouse on a page pdf (javascript)

    Hello

    I would like to know if it is possible to detect the position of the mouse, movement and click the events/info from the javascript to the level/App on a pdf page.

    Thanks in advance

    You can detect a click (mouse upward, the mouse down) and get the corresponding mouse position if you configure a button on the page, which can be as large as the page. Otherwise, you can not with JavaScript.

Maybe you are looking for

  • Thunderbird: No emails

    I installed Thunderbird a few days ago on the Windows 7 Home Premium computer. After not receiving ANY e-mail and not able to send emails, I read the advice on your support page, Thunderbird allowed through Firewall (screenshot 1) and check that the

  • problems of Pro Sim for Apple 9.7 iPad

    Good evening I tried to use my Apple Sim, but unfortunately, it won't work, the iPad can not find all the suppliers.Despite that, I am in a larger city. The Tablet has a signal, at least I can see the iPad GET is a signal. What could be the error? Lo

  • How to enable the Support of Legacy desktop Z240

    Hello Does anyone know how to activate the legacy on Z240 workstation support? Under "secure boot configuration" in the BIOS I chose "Legacy Support enable and disable start-up secure", but after I save and reboot, it reverses to 'disable Legacy Supp

  • Confusion of recovery UEFI or legacy

    My wife has an Aspire V - 5 431 that exploded a year ago. Not a common model, the model was built for Amazon to distribute to employees, they changed their minds and sold on Woot. I bought two and have been really happy with them. The machine came wi

  • MSG "this copy of Windows is not genuine" build 7601

    My computer crashes and I had to go to Safe Mode.  When I looked at properties, I saw that the status of the Activation and the code is "not available".  I know I have a genuine copy of Windows.  What can I do?  Is attached a MGA diag reportDiagnosti