PID.h necessary even if I included

I recently to explore the possibility of using the Labwindows PID Toolbox instead of my own out of sake of interest. I ran a few examples very well. When I implemented in my application, I included the following header files


#include "PID.h".

#include "asynctmr.h".






Even though I've included PID.h it gives an error

The following include statements are needed in "myfile.c.

#include "PID.h".

You want to add them after the include statement for windows.h?

I have of course included but wonder if I don't have something set up correctly in my environment. I should also mention that this is performed on a real-time target. The seemingly useless included headers are there because I have a file that is compiled into windows and LVRT and handled with directives #if _LINK_CVI_LVRT_.

I provided the activation key earlier yesterday and have rebooted the system. I can run the examples very well. Any thoughts or ideas?

Finally, he was an old pid.h of file that ASO hiding in the repertoire and was not included in the compilation for some time because now my own implementation of pid exist in another file somewhere, go me. Remove obsolete files, did the trick.

Tags: NI Software

Similar Questions

  • 5 updates appear necessary even if they are already installed as directed in the history of the update.

    These updates are KB2487367, 2656351, KB2468871, KB2533523, KB2600217. I ran the Update troubleshooting tool, but it does indicate any problems. I downloaded these just now and the installation process seems to work normally (no error shown). I checked my history of update and they appear as installed. Any ideas?

    I have read the previous post and did the following: went to 'remove program' and deleted the following entries for ".NET Framework" - KB954430 KB973688, Microsoft .NET Framework Client Profile, Microsoft .NET Framework Extended. I then restarted the computer and reinstall .NET Framework in the update section in the Panel and it seemed to install without problem. Initially cited updates have been installed later, and I get not all prompts to install additional updates. So far so good. Appreciate the quick response.

  • Using Framemaker, 2015, when editing, changes are NOT saved even after registration, including when you import new graphics.  Save, and then reopen the document and the old graphics are here and sometimes even old text.  Is this a known bug?

    Steps to reproduce:

    1. open a document in FrameMaker 2015

    2. change the document

    3 save the document

    4 open new document.

    5. unsaved changes.

    Embarrassing especially when doing the import images, old we remains same after the new update.

    Work in progress about-

    change the document twice and then save. The backup file would be the problem? Frame creates several tables backupfile and so the backup must be updated before the primary?

    Try the direct path - updates

  • Activation of Windows still necessary even if the virtual server on the same hardware to restore

    Hello, I hope someone can answer this.

    Our virtual machine running vmware server ESX 3i 3.5.0 has 2 hard drives, datastore1 and datastore2.   All of our virtual servers are stored in datastore2.   Our hard disk with the datastore2 crashed and he had to be replaced.    We have backups of our virtual servers in datastore2 virtual appliance.

    To solve the problem, we replaced the hard drive crashed and then restored by using the virtual appliance backups, once restored, we noticed that the Windows 2008 requires that the activation of the licenses.

    My question is why does windows need activation when we restored the virtual server for the same hardware? The only thing that has changed is the hard drive.

    Thanks for any help on this issue.

    Export/import unfortunately OVFs does not have an option (at least I'm not aware) to maintain these settings. What you can do - when exporting the virtual machine as an OVF - also download the machine virtual . VMX and .vmxf files. After re - import the OVF, remove it the ESXi host inventory, download the two * .vmx files and add the virtual machine to inventory. -Once asked if you copied or moved the VM on the first power-select "I moved it.

    André

  • Tecra S3 XP Setup not find HARD drive even if the RAID drivers were included by F6 key

    I tried to install a normal XP (not recovery). But the installation program will not find my HARD drive even if I include the Toshiba RAID via F6 drivers.

    Any ideas?

    > I have decided to use nLite and added the raid driver but after several installations different combo, I'm done with the original problem which does not recognize my floppy USB drive after format

    If you have included the RAID driver using the nLite so I put t understand why you need the external USB floppy drive?
    Anyway, to my knowledge, not all USB FDD drives are compatible and it can happen that a non supported USB FDD drive will not recognize and so you would not be able to install the RAID floppy driver!

    But nLite is the key! Using the nLite you n t need the USB FDD drive!

  • Enter your password... Guard asking even after reset and re - install and the curse

    I recently did a clean Win 7 SP1 and re-installed installation many programs. I used REVO uninstall pro to make a withdrawal deep and re-installed Thunderbird 38. I ran the chrome://pippkicontent/resetpassword.xul. I managed to help my pw even years now including my connection information to the web site of Netzero. When I start Thunderbird, I type in the pw was asked and he accepts it for sending a message and when I type in the same pw, it sends a message. When I exit Thunderbird and start it again, he wants to again my pw. I tried to "Normal password" and "Encrypted password" and restart Thunderbird restarted and reinstalled...
    I uninstalled and reinstalled and made sure the security zones are disabled for the pw and master pw economies. I deleted all cookies. Regedit shows a lot of entries in mozilla and thunderbird in remaining after the deep uninstall. I dare not remove regedit entered on mine, again. Any ideas before I divorce Mozilla?

    "Firefox"?

    If you tell him not to store passwords, then he must ask for them whenever you start.

  • Include the user password in Notification email - IOM 11.1.2

    Hi all

    On creating an AD account successful, I need sends a notification by e-mail to the user with the ID of account manager and password in the body.

    I am able to send notifications by e-mail to the Manager, but not able to send the password in the body of the email.

    Please give me the procedure, to include the password in the body of the email.

    Method I followed
    -------------------
    -Created a custom e-mail definition of Design Console-> definitions of email.
    -Could not find variable password of e-mail definition-> Variable-> target (one of the drop-down list)

    Thanks in advance...

    I found the solution...

    Create a custom model notificiation, which involves the following,

    (1) define the events that is done using an XML file

    (2) create a resolver class that implemented oracle.iam.notification.impl.NotificationEventResolver

    (3) create plugin.xml

    Now in the resolver class, even if we include the password as a security attribute, the value be appear not in the body of the e-mail once received. Therefore, use SQL query to retrieve the encrypted table USR password and decrypt and add Notificationdata that will be returned by the getReplacedData() method.

    See you soon...

  • Why is there no user interface for moving the cache locations/profile?

    OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
    (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
    To change your profile location? The doc only that talks on this subject here:
    http://KB.mozillazine.org/Moving_your_profile_folder
    and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

    And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

    There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

    Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

    Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.

    https://developer.Mozilla.org/en/Profile_Manager

    https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager

    http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/

    You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

  • Maximum storage capacity for RN316

    I know there are other topics covering this, but not for the model, I am interested to. I notice conflicting information on what maximum storage capacity, are supported by the RN316. For example, looking at the Datasheet on the Netgear product site, it shows the RN316 supports up to 60 TB and is expandable up to 128 TB with external units.

    https://www.NETGEAR.com/home/products/connected-storage/RN316.aspx#tab-TechSpecs

    Here, the graph shows however differently (hoping it is exceeded). According to this, the same model only supports 24 TB of max and is expandable up to 64 TB with external units.

    http://KB.NETGEAR.com/app/answers/detail/A_ID/7010/~/ReadyNAS%3A-expansion?CID=wmt_netgear_organic

    In addition, said Amazon list it has a limit of 4 TB of each Bay, but hard drive compatibility shows that it supports 8 to even 6-disc (including TB WD drives Red 6 I ordered). So I'm a bit confused.

    Are the limits of capacity related to older hardware, or is it something that is been upgraded over time through updates firmware for the ReadyNAS OS 6? I bought six to 6-disc for my RN316 and intend to use RAID6 - up to 36 TB of physical capacity and capability real/loglcal to 24. Can anyone confirm if this configuration would be supported by this model? Thank you

    When the RN316 came out 6 TB discs were not available. Once we were able to test and qualify the and add all the necessary improvements to the firmware works well with them, we were able to add 6 to discs to the compatibility list.

    10 TB disks start to become available now. Regarding which models will be tested against this ability or to work with, it remains to be seen.

  • Static analog output without a while loop?

    Hi all

    Would like to know if it is possible to set up a card outputs analog instrument (with DAQmx I presume) to have a static/continuous output, without needing to use a while loop.  I what would want to return a single value rather than a table or a waveform.  It would be similar to option for digital IO cards to have static strings instead of strings of waveform.  In the examples I've seen, he always seems to be a time loop is necessary, even if the channel is configured for a single sample, but I think it would be cleaner and easier to control dynamically without the loop (particularly if I run several screws in parallel).  My particular application is to configure inputs and outputs analog, then runs different tests with other maps of the instrument.  Please notify.  Thank you.

    GSinMN

    No, you don't need a loop. A writing DAQmx for 1Sample game, it's all you need. Please include am image of the pattern block one of these examples. My guess is that the example is simply a way to accept changes in production without having to re-run the whole VI.

  • Updates for Office 2007 if displayed when it is not installed

    I have a new install of Windows 7, that has never had office 2007 is installed. I have office 2010 installed. When I go to Windows Update it shows 8-10 different updates Office 2007 listed as important. Including the installation of Office 2007 SP2, which I certianly don't need. I know that I don't have to install, but it bothers me that they make their appearance and could in fact be necessary, even if I try hard to understand why.

    Thanks in advance for any info.

    Is the Office Word, Excel, or PowerPoint 2007 Viewer (s) Compatibility Pack installed?

    The update of "Office 2007 SP2" named Microsoft Office 2007 Service Pack 2 or something else?

    You will find Office-specific assistance in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot declare a variable CNiTimer in a header file * view.h

    It cannot declare a variable CNiTimer in a header file * view.h?

    I run a MDI VC2005 project with extention of studio OR measure. I have check the project example of "TemperatureSystemSDI.2005." It works very well.

    But when I use the following statements in * view.h, compilation, errors are reported:

    Code:

    Class CVAView: public CFormView
    {...

    public:
    CNiTimer * m_pTimer;

    ...

    }

    Error:

    ERROR C2143, C4430.

    At the first beginning, I assume that the error might occure when the failure of the header file include. But when I include the following headers, there are still compilation errors.

    Code:

    #include "NiGraph.h".
    #include "NiSlide.h".
    #include "NiTimer.h".

    This time, compilation errors are:

    Error C2440, C2548, C2143, C4430, even more than the cases do not include those headers.

    I don't know what the problem is. I just declare a variable of CNiTimer! Could you please help me.

    Add #include 'NiUtilityComponent.h' or use the Studio remove measure class library Wizard (in the Measurement Studio in Visual Studio menu) to add a reference to the library of utility classes. Files * Component.h aggregate all the necessary header and library includes a library for C++ Studio action.

    If this does not work, please attach your project and we will take a look.

    David Rohacek

    National Instruments

  • Windows XP encrypted data more no key cert, I can always get it back?

    Data backed up, reinstalled XP Pro to the discovery of data is encrypted and I don't have the key to cert.

    I can recover data even if I deleted the partition?
    Please can someone help me with a few options I have to retrieve this data.

    Certainly, you can't recover your data.  To do this, you need to retrieve your old certificate (which itself is encrypted) and all the information necessary to decrypt it including your old Secure ID (SID) and password.  Changes to find on a reformatted and re-installed partition are virtually nil.

    Mandatory for anyone using the Encrypting File System (EFS) is the following article.  Special attention to the paragraph at the end, entitled "why you should back up your certificates.

    "Best practices for EFS file system.
     <>http://support.Microsoft.com/kb/223316 >

    HTH,
    JW

  • Newly installed Windows XP Home Edition SP1a Version 2002 works not properly.

    I have a Dell Dimension 4300 S and I recently installed Windows XP Home Edition SP1a Version 2002 from the disc I have. When I try to download the SP2 and SP3 from Microsoft I get this box that says "extraction error." I can't download anything and sometimes, when I'm on the internet on this computer, it says "Internet Explorer has encountered a problem and needs to close" and I send error report and, sometimes gives me the blue screen and starts dumping memory. Also, it wont let me on the Windows Update page and the computer won't auto updates.

    Does anyone know what is the problem? I reinstalled Windows XP Home Edition SP1a Version 2002 two or three times now and linked the repair disk, and I always get the same problems.
    Let me know if I have to give any specs or whatever it is.

    Love the help I'm getting here. :)

    Sorry for the delay but this is a public forum, the vast majority of us here are simply users of Microsoft products (even those with MVP behine their names which is just an honorary title) as help you others when we can. We have no affiliation with Microsoft, nor do we receive any advantage whatsoever, we are just volunteers. Occasionally, a Microsoft employee can post but it's pretty rare. On your workstation.

    After having reinstalled Windows XP Home Edition SP1a have you installed the necessary drivers? This includes drivers for the motherboard (chipset), audio, video, LAN (network adapter), and so on.  If this is not the case, check the page linked below:

    Drivers & downloads for Dimension 4300 S 
     http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=DIM_PNT_P4_4300S&OS=WW1&OSL=en&CATID=&impid=

    If you are not quite familiar with the Setup pages both driver below should help:

    Dell - drivers & downloads help
     http://support.Dell.com/support/topics/global.aspx/support/downloads/en/drivers_help?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

    How to download and install drivers in the correct order
     http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&docid=268873&l=en&s=DHS

    Since SP1a was part of the reinstallation, you will only need to install SP3. The page below the States 'in order to install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) "installed.".

    Learn how to install Windows XP Service Pack 3 (SP3)
    (see manually install SP3 using the Microsoft Download Center or a CD)
     http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    IMO, it's better to download SP3 for:

    Windows XP Service Pack 3 network installation Package for IT professionals and developers
     http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

    I know that the above download is 316 MB and will take time to download, but from my experience, I had much better luck with that route. In addition, you can then save SP3 on a CD if you need to reinstall again.

    Finally, the following page should help you in the process of installing SP3:

    Steps to take before you install Windows XP Service Pack 3
     http://support.Microsoft.com/kb/950717

    Please post back should you need more help and good luck!

  • PC Backup doesn't work no-internal error: Server execution failed - error Code 0 x 80080005

    Hello

    I use Vista Business SP2.

    I'm having a problem with Windows complete PC Backup. When I click on the "create backup now" trying to create a full backup of the computer, spends about 15 seconds and then this message:

    The backup application could not start due to an internal error:
    Server execution failed (0 x 80080005)
    Please check the configuration of your system and try again.

    I click on ok, and the message appears once more.

    I'm trying to save on the same disk external I used for backups. Backup of the files on this drive works fine.

    Here are a few things that may be useful to solve this problem:

    1. I recently uninstalled and tried to reinstall Sophos Anti-virus, but I can't reinstall.
    2. My computer has been restored using the backup of the computer in the past. I have not saved since.
    3. I recently changed the permissions/owner on the external hard drive that I support up to.

    Thanks in advance.

    If you have replaced TrustedIstaller with something else, which could very well be a part of the problem.  It is a user of the system and it can be called by the name of some programs and if she isn't here so the program does not know what to do.  I don't know how to solve this problem - I don't think add that a new administrator account to the user with this name will do (because it will have a different code).  In my view, that a re - install is the only way to solve this particular problem.

    Here is an article on the fixation of 4201 event viewer error: http://www.vistax64.com/tutorials/110886-event-viewer-error-4201-a.html but I wouldn't bother with this if you have an Installation of Windows Vista genuine disc.  Come back if this disc does not (and I don't think it will be necessary).

    CONGRATULATIONS on finding a disk for Installation of Windows Vista SP2 genuine - I guess that it's 32-bit (like your system).  It is exactly what you need - a commercial version.  The OEM versions do not work because they include device drivers specific to their computers and those who will hose your system unless they have exactly the same system for (and I don't think you can do an upgrade by using the OEM versions - at least not all of them - just a clean install {although I found a HP and it has used to update my XP system crashed then) ({I was waiting the disc of real update that I bought from Dell - not exactly kosher but finally in compliance}).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side (by copy and paste if necessary even if you can't use the full backup feature). If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install.  What version of Vista do you have currently?  I think that the drive will work with any version of Vista (they contain probably all versions on them and that they install is governed by the Code of the product used - but I have never actually tried using a different version of disc - I only heard this said by people who seem to know what they're talking about).  The fact that it is SP2 means that you won't have to uninstall all the Service packs that is even better.  I REALLY hope it works for you.  Make sure you use the UPGRADE option or you're going to do a clean install.  If the upgrade option is grayed out, it means that it will not work (but I don't think that this will be the case).

    If the drive works (and after installing all updates), then there should be nothing to fix on your system - it should work like new.  You should be able to do your backup with no error message.  Have no other problems.  This will fix the problem with TrustedInstaller so.  I feel confident thiis will work.

    I mentioned that Acronis because first of all, it's the best backup software and secondly because there could be a workaround, because it does seem like there was another solution because you do not want to delete this special software (but now that you have the disc - which is debatable – although it is still the best software {even though) ({, as you say, it's not free}).

    As far as Windows7 goes, I refer you to the Windows7 Forum at: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where the people who specialize in installation, the upgrade, and activation Windows7 will be more than happy to help you in the process.  I have Windows7 (my computer is not compatible and it is too costly to update since it's several components that need to be changed and my other computers are even older, so he has no hope here - I just have to wait until the "I need a new computer" but strikes me to new, but that will probably not for one or two years).  To be honest, I wouldn't intentionallly update at this point even if I could because I always wait a while before installing a new OS (generally up to the publication of its SP1 and in the case of Vista its SP2) to let other people work the new bugs - and there are some despite what you see in the ads.  Spend time on Windows7 forums, if you don't believe me.  Out of the box, she seems to be better than Vista did (which was awful) but there are still issues that need to be addressed - I'll wait instead until it is more stable (and a bit of my software is not compatible and I don't want to have to go out and buy all these updates at the same time (, because it will be too expensive overall).  But if you want to upgrade, which is perfectly fine - thousands of others do (always, especially since Vista has problems after all this time) and I totally understand.  This is just my own personal bias and procedure - I don't recommend to my clients that I recognize it as being just a personal preference rather than one-piece objective advice.  Before installing Windows7, make sure that your system is ready with the Windows7 Upgrade Advisor to: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx - you should perhaps update or remove some software and may not even need to upgrade certain hardware - better know before you start (especially if you go x 64 which I assume that your PC is able to treat - mine isn't).

    I hope this helps and wish you all the best in your effort to make the repair/improvement of the system.  I hope it works.  Remember that you must use your own product key to activate the software if necessary.  If it does not automatically have to activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you had a problem and you need to reinstall the OS but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for