Pier show shared network - Manager profile

Similar Questions

• on my network card, a question mark appears that wasn't there. He appeared as a "switch" until I disabled "sharing network". He went away for a day and returned. This is a hack of nieghborhood?

  My mother is a modem from Qwest. I'm on a laptop with wireless on the same account. We were on a homegroup network. I found a question mark on its network card and a photograph camera, on mine with the name 'switch' and no other info on this subject between the computer and the modem peak. I called Qwest and they said they didn't know what it was. So I disabled all the sharing network. He went away. 2 days ago. Today, I checked again, he had again disappeared from the workstation but now it's back on mine, but it shows up as a question mark, as it did on the desktop. And also, there were a few weird anomilies appear on our computers. Do I have a virus or maybe a neighborhood hacker?

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• Please recommend network management software

  Hello!

  I need help to find a network management software that is compatible with our switches. I use a network with Cisco/Linksys managed switches:

  10xSLM2008,

  5xSRW208,

  2xSRW2008MP,

  1xSF 300-08

  I was hoping there is management software (not the thing webview/web browser), that could do these things (in order of preference):

  -connect to these SNMP (or similar) to show me a little statistics on each port on each switch, as well as the connectivity between these switches.

  -I would like to know which port what mac addresses and possibly the IP addresses of these.

  -Let me know what mac addresses uses more bandwidth

  -ban a mac address

  I'd be happy if someone could give me advice on what software to buy.

  Best regards

  Lars E Fodnes

  SolarWinds NPM - http://www.solarwinds.com/products/orion/info.aspx

• Access shared network drive?

  Is there an app or a way to access the wifi from a shared network drive files? As I shared my library of music, movies and photos?

  File Explorer is my choice and it's free and available on the market.

• Real-time target - change IP and shared network varables

  Hello

  I create an application for the system in time real (Compact RIO).

  All data between the (current running on a windows PC-based) GUI and the real time system - is transferred via shared network variables.

  Shared variables are hosted on the target.

  I attributed the static IP address to the real-time target.

  Now for the question:

  After the deployment of the application in real time on the Rio target compact

  If I change the IP address of the target: how the shared variables 'know' to connect to the target?

  There is no place in the GUI (running on windows PC based) I set the IP address of the target.

  So I change the IP Address of the target (and for the sake of argument if I change the IP address of the PC, but they are always on the same subnet) - how to 'know' how to connect?

  Looks like a basic question I am absolutely certain I'm missing something to understand shared variable...

  Thnaks

  Hello Hazkel,

  The IP address of your shared time variable real target is located in the *.aliases file when you create an executable file, you will need to change there.  See the example below:

  

• I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

• reconnect the stall network of shared network variables

  I have a cRIO unit communicates with a laptop using shared network Variables, one of them being a table of 21 index which is buffered.

  The system connects and communicates very well, but sometimes the wireless laptop card is to lose the signal from the WAP, attached to the cRIO.

  In this case the network never shared Variables "reconnect" and start to receive values still once the wireless link is restored.  Is this expected behavior?

  When I tried to use other WAP industry instead of the card laptop wireless, I get no abandonment.

  Hello Ryan,

  Please contact National Instruments!  I looked into the problem you are having and I wanted to ask you a few questions more.  First of all, you have a period of time which allows the reconnection?  I believe that the Shared Variables should find the connection after a short period, but it may not be a very quick process.  It may take a few minutes to the Variables shared to reconnect.

  The other thing that could happen is if you have error son being passed by shared Variables, it is possible that the error is not be deleted, and so he will always see the error and not a so never reconnect.  In this case, you will need to filter this error and then clear the error in order to use again shared variables.

  If you have more specific information about your program that can help us to determine the reason for this behavior.  As a screenshot of your code would be useful.  Please let me know if you have any other questions and I'll be happy to help you.  I hope this helps!

• How can I lock a shared network folder.

  I want to know about the network folder, how can I lock a shared network folder.
  Actually I'm under small network at home and I want to share some files, but I also want to protect files, no body, no go without my permission.

  Waiting for your response.

  Thank you
  Tauseef Ahmed

  Hello

  Adding futher to Wunders his Adviser.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

• Problem to a file/printer sharing network.

  Hello

  I want to do a network to share files, printer and internet. I have already shared the internet by all connection to the access point devices through wireless and connecting the access point to the cable modem, but I can't share any file or folder.

  I tried many things to create a small network of win xp, but I failed.

  I have a wireless access point Dap1150 D-Link wireless modem 1 billion for the ADSL2 +, a PC (win xp) with a normal network adapter and an external wireless LAN adapter + a laptop (win 7) which has two cards and support network wi - fi.

  Please help I have searched a lot but I couldn't find anything useful.

  H

  Assuming that the "billion for ADSL2 wireless modem + ' is a router, and it is configured as one.

  Since you have a Windows 7 computer too, the network must be configured take into consideration.

  -------------------------------

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "the service does not exsist as an installed service-" File Sharing/networking

  I am running Vista x 64 Home Premium and have recently had problems with my file sharing-printer sharing network discovery-Media Sharing. For the last 8 months I run my Xbox Live through my computer laptop Ethernet to log-on Xbox Live connection and had no problem connecting. Recently I went to connect and was not able to connect my 360 * to the internet via my Ethernet connection. I checked my network & File Sharing settings and noticed that ALL my "Sharing" Options have been disabled. When I tried to turn it on I get "service does not exsist as an installed service. The only thing that works is the password protected sharing. I read almost all the options resets and sfc.exe and led to no result. When I run the sfc.exe program it gives me the final results of some files have been found to be corrupt, but have been unable to solve the problem. I can't locate my Vista recovery disc after moving so I won't be able to reinstall to factory set up. With regard to the system of recovery for some reason that I can't go until this situation occurred because of some settings which apparently changed.

  Hello rjaymz83,

  I suggest a system restore to before the issue started occurring:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  The issue occur also in Mode safe?
  You have carried out comprehensive analyses of viruses and malware on your computer lately?
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• Need help, reinstall the killer Network Manager!

  I have recently reinstalled windows 10 home because there was a bug in the windows system file that I couldn't fix.

  Now, I have reinstalled windows 10 and redownload all my files and changed my HARD for one SSD drive.

  But, I searched the web and I couldn't find Killer network manager anywhere and I have also asked people in the Alienware Service on Youtube, but they gave me a link that leads to a Support Dell Alienware x 51 with the Killer Network Manager.

  Then I noticed that there is no link for downloading or a button.

  At the time, I also disabled Adblock and Antimalware bytes...

  Please answer as soon as possible

  Best regards, id9e6osoedk

  Hello

  Try this one if it's Ethernet:

  www.dell.com/.../DriversDetails

  Or even this if this is the wireless:

  www.dell.com/.../DriversDetails

• OpenManage Network Manager does not connect to

  I use the 5.1 openmanage Network Manager to manage the switches PowerConnect 7048.

  I am able to manage/monitor switches using SNMP without problems.

  However when I use telnet/ssh it keeps throwing errors saying "1 has failed to authenticate. Please click here for a list of devices that have failed. "trying to manage these devices by default".

  However the document says what needs to be written to the field ID to enable.

  I got it going!

  There was a problem with ssh on my switch. When activated it works now

• Default gateway and network management

  Hello

  After installing the initial (via a serial cable), we installed the default gateway on iSCSI network. IP address is defined for the management interface on the network of management as well. Now, we want to access different network management port.

  In fact it should really dg on iscsi network as there is not etc to another network for replication. So if I try to change the dg on GUI does not change me. Can I change the dg on cli or add new lines to the management network?

  Thank you

  With a dedicated management port, you have now two bridges 'by default'.   An iSCSI, one for network Mangement.  The iSCSI Gateway is strictly for iSCSI traffic.  All of the management features will use defined for management.

• Cannot Wireless network Management Application

  We use Cisco Wireless LAN Controller 4400 for two years. Yesterday, we had a report that the Wireless does not work. We found that the problem is Cisco Wireless network Management Application does not start. If I try to start it, I get the network Wireless Application Management with Error 1067: the process terminated unexpectedly. I tried to clean boot, but that doesn't fix it. We have not changed anything on the server. Any suggestions?.

  It seems that the firmware is damaged or the compact flash (CF) is dying.

  Have you tried to reboot the device?

  Have you tried to update the firmware?