pilot (4thGen) Apple i-touch for xpsp3 (computer Dell does not recognize the ipod/itouch)

Similar Questions

• Windows Media Player does not recognize the iPod touch.

  Windows media player does not recognize my ipod touch to sync

  Open WMP in the taskbar from top, find "Tools", scroll down to options.

  in the new window, locate the Hardware tab, add hardware.

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• BlackBerry Smartphones Desktop Manager 4.7 for BB "BOLD" - Roxio does not recognize the SD Media

  I use the latest (version 4.7) Desktop Manager but Roxio will not recognize the SD card inserted in the phone.

  I tried (2) Micro SD cards with data on them both.

  The phone recognizes both cards and I can access the files via telephone.

  I forgot one option in Roxio?

  Hi and welcome to the forums!

  Please tell us what type of PC OS you use. (Windows 2000, XP, Vista)

  See if you can access the support card without using Desktop Manager.

  Fix the USB on the BB and the PC. Do not use the Desktop Manager.

  Go to 'My Computer' on the PC and the BB will be displayed as a flash drive.
  Then you can "drag and drop" files on the BB.
  Use the following settings in the option of "BOLD":

  Card support ON

  NONE encryption mode

  (Storm AND "BOLD" only) Media Transfer Protocol

  WE support mass storage

  Auto enable mass storage support when it is connected TO
  Thank you

  Bifocals

• Computer does not recognize the Ipod shuffle.

  original title: help!
  I just bought a new iPod shuffle (4th generation), and when I connected it to my computer, it will not be displayed. And it let me sync any music. Does anyone know what I can do about it?

  You must download and install iTunes to sync music to an iPod.

• Computer suddenly does not recognize the mouse.

  Mouse frozen earlier this evening. Tried to reboot the computer, but the mouse icon is stuck on the same position on the screen. I tried two other mice, USB connection or wireless all plugged into several USB ports. USB power lasers on mice, but there is no movement for the icon. Any help would be appreciated.

  Try a PS/2 mouse.

  Also, make sure that the other devices (except the mouse) on this port works fine or not?

  S.Chatterjee

• using bitlocker to encrypt the hard drive but the computer now does not recognize the hard drive.

  I use a computer, provided by the company, with the OS Windows 7 Enterprise.

  Is connected a drive 2.5 inch 500G external hard, of WD.

  Using BitLocker to lock the hard drive and with a document of the company. And, later, you unlock the hard drive with the same computer. Status ok. However, I connect the HD to any other device, but no HD were found. Then I plug the HD again with my computer, the BitLock software are not really able to the HD has recognized and sometimes rapidly upward and ask for the key to recovery.

  I tried to use the key (txt file), but still no success.

  I called the hotline of Microsoft and was re-directed I post my question here.

  Appreciated if anyone in this community can help...

  My computer is LEnovo X 201.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/threads

• HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

  I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

  Hello

  Your machine IS not card reader. His record:

  http://support.HP.com/au-en/document/c04420347

  which indicates:

  External ports:

  • Multi format digital card reader for Secure Digital cards
  • 2 superSpeed USB 3.0
  • 1 bus (USB) 2.0 universal series
  • 1 HDMI
  • 1 PORT RJ-45 (LAN)
  • 1 plug headphone-out/microphone-in the drop-down list

  Location:

  

  Everything you need: download Driver Realtek card reader and install it on your computer.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

  For your question: all the USB ports work?

  Kind regards.

• Software for 8500 A909g HP does not recognize the printer during set up

  I recently had some problems with malware that weighed my HP product.  When I removed the software and then reloaded the software, it no longer recognizes my all-in-one on the net work.  I tried the network diagnostic utility and that he sees the printer but when I click to check the connection, it does nothing.  What Miss me.

  Catherine,

  Download the installer and it works from disk hard went around.  I never thought that the CD was the problem.  Until your recommendation, I spent a lot of time trying to make it work.  Thank you very much, you're my HERO!

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• iTunes does not recognize my ipod touch but my pc it shows as removable disk

  iTunes does not recognize my ipod touch but my pc it shows as removable disk

  First of all:

  iTunes: fix iPhone or iPod not detected Windows 10

  Then, try

  iPhone, iPad, or iPod not recognized in iTunes for Windows

  -I would like to start by

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  or

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  -New cable and another USB port

  See also:

  iPod not recognized by iTunes windows - CSA

  Troubleshooting problems with iTunes for Windows updates

  -Try on another computer to help determine if a computer problem or iPod

  NOTE: you need iTunes 12.3 and in need of Win 7 or a later version.

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Apple TV does not recognize the ID or password

  Apple tv does not recognize the ID or password.  How should I do?

  I had this problem too with the Apple TV v2. I contacted apple support and they advised me to go to id.apple.com and login and turn off validation in two steps. Then go and setup of the Apple TV. Once completed, re - simply activate two-step verification. It's a real pain to do, but it worked for me.