pilot down

Similar Questions

• support site and pilot down?

  I tried to download the driver for CM1415fnw. But he urged that the site has been moved. Y at - it a problem on the website. problem occurred around: Singapore time: 20:40 date: 03July 2012.

  Here is the link to the site on the Business Support Center... same drivers just a different portal.

  CM1415

• Is the HP FTP site for pilots down? I can't download it either of the drivers Photosmart c6150.

  go to: ftp://ftp.hp.com/pub/softlib/software10/COL15860/mp-41971-2/AiO_071_000_201_000_CDA_DriverOnly_Netwo...

  I get can not display. The site unavailable or the driver is no longer available?

  Hello

  Try the slightly updated the link below.

  http://ftp.HP.com/pub/softlib/software10/COL15860/MP-41971-2/AiO_071_000_201_000_CDA_DriverOnly_Network_enu_NB.exe

  Kind regards

  DP - K

• 24 b017c: 24 - b017c dual boot with Win7 possible?

  The b017c is capable of running WIN7 pro in anyway shape?

  I really need to do a system dual boot with WIN7 If Yes.  WIN10 is not be nice to some specific software Attorney that I need to have to work for a client. Win7 is the latest OS, this software is compatible with before an upgrade of expensive software can't be compatible with Win8 or higher (we're talking $1000-2000 range).

  I tried to install WIN7 on this computer after the partitioning of the disk space, and put out several settings in the bios (I had error btw), but WIN7 keeps hanging in the first screen after loading the drivers (language selection screen). Something happens where ports USB closing killing all connections to the mouse and keyboard. I have tried many changes in the bios settings and a retry of the WIN7 Installer (from an installation disc) but no dice.

  Is there a certain combination of settings that must be disabled in the bios to get the win7 Installer right or I'm screwed?

  Thanks for any help

  What an adventure!

  As you discovered, you must completely format the drive as one or the other (GPT or MBR).  You cannot format a GPT partition and the other in the MBR.

  I wonder if you had back and disabled the legacy mode, if W7 would let you install on the GPT - or partition if the disabling legacy mode would also have permitted secure boot.

  In any case, it's water under the bridge.

  Drivers... Here are some that may work...

  First install the driver from the Intel chipset and restart the PC.  A 2nd on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

  See if this graphics driver works... 3rd one down on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/26228/Intel-graphics-driver-for-Windows-10-and-Windows-7-8-1-15-40-?v=t

  Audio: Accept the agreement.  Download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Ethernet: Download, unzip and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Card reader: download, unzip and install the driver from the 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Wireless: 2nd pilot down on the left.

  https://Downloadcenter.Intel.com/download/26242/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

  Bluetooth: 2nd one down on the left.

  https://Downloadcenter.Intel.com/download/26311/Intel-wireless-Bluetooth-software-for-Windows-7-?product=89450

• EliteDesk 800 G2 Mini 35W: EliteDesk 800 G2 Mini 35W - Bluetooth problems

  I'm trying to get this camera photographed with our base image 64-bit Windows 7 Enterprise. I get the following errors:

  • In Device Manager, the Generic Bluetooth adapter is to throw the error "Windows has stopped this device because it has reported problems (Code 43)"
  • In case the Viewer, in Windows logs - system, I see the following pop up every 20 seconds or so: "the local Bluetooth adapter ran out of undetermined manner and will not be used. The driver has been unloaded. "EventID is 17 and the Source is BTHUSB.

  I tried several different drivers, both HP and Intel and applied two patches (KB982046 and KB980396), from various other recommendations of Web sites. I tried the recommendations repeatedly repeated re-disabling/enabling; Uninstall/scan for hardware changes & pilots applying; closing (unplug) for several minutes and restart System. Currently, I'm doing a request only the USB and NETWORK card drivers and am still seeing this problem, but I also applied all the drivers with no difference.

  A few questions:

  • Has anyone else seen elsewhere and fixed it?
  • USB drivers would be the issue? I use USB drivers otherwise, I can't use my keyboard and mouse.
  • Any other suggestions?

  Hello:

  Try the W7 x 64 driver directly from Intel.  2nd pilot down on the left side of the page for 64-bit.

  https://Downloadcenter.Intel.com/download/25838/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-?product=86068

• Persistent problems with wireless home network

  Hi, the problem started two weeks or more ago, when after the connection to the internet easily using our wireless network connection, my computer began to say that our domestic network was unidentified, then studied by troubleshooting my self but do not really understand the information the computer indicated to me. As it was a problem of the internet I contacted our local provider broadband, they looked like the line and the service was absolutely perfect and to confirm this router computer of my father in the same cable network has internet connection easily as it was my mom who was using the connection via the same router wireless cell phone.
  Following the instructions of technitians I have tried to manually enter internet addresses to see if that would help the internet connection, it did. So I thought that the problem has been resolved. I had the use of the internet that day and everything was fine until I restarted the next morning. The problem reappeared. So I called my internet provider again, this time I'm sorry to say to a girl rather too quickly diagnosed that I had a virus to uninstall Google chrome and reinstall a different browser... That didn't make sense to me, but I tried some sort.  So I moved my office tower and all the bits in one place in the House were we could conect it to the router with an ethernet cable followed his instructions then moved the computer to its original position but still no internet connection and still this problem 'identification '. I turned off the machine and tried again the next day. Start by running the troubleshooting of network problems, this time I looked at the detailed report which curiously stated that the computer had difficulty oscillating between two somethings (sorry don't remember the detail correctly is days ago)
  So I called my internet provider again and I am a helpful young man, read him the information and examined the reports that they had written about the problem in the days preceding. I followed his instructions looked in the network sharing Center, settings changed and added in manual codes for the internet, turn off the router for 10 seconds or more and then restarted, this time with not even a temporary success. We tried a few things but I always got the same contradictory message in the dialog box in the lower right corner, where it showed I was connected to the local network not connected to the internet, when I opened the network sharing Center from the local network to the router would show that 'Identification' and the conection to the internet would be marked with a cross. I managed to pass my network profile is for some reason any defined to the public rather that home and we were able to change it (even if it wasn't easy)
  So I was told it was probably a driver issue, I was told I might need check the updates of my license on this operation the technitian and I also saw the site of netgear, that there was a potential conflict between Kaspersky and the netgear driver, so I need to uninstall my Kaspersky anti-virus stuff and the old pilot , down load and install the new drivers and then reinstall kaspersky. I followed it. (Movement of the tower and all the bits in place in the House were the ethernet cable was available).  I found an updated driver, uninstalled downloaded kaspersky and run only the driver installed Kaspersky again. Everything seemed to go well and I even plugged in the wireless adapter connected to the internet through that and disconnected the cable... things were going well.
  So I turned off the machine and carried over into my room where I turned on once again. The problem reoccured. I thought it was time to communicate with kaspersky. So I turned the computer off and reduced to the ethernet cable. Connected a Kaspersky contacted by e-mail, they were quick and I was asked to run a program that logeed my information system. I did this and I told them I thought it might be a conflict between the driver and their softwear, they have looked into it, asking me to run a misuse of this program and the results by e-mail. Once again, I've followed the instructions and took notes, but no problem was found. They showed me how to configure my kaspersky firewall to allow access to the networks. It's when I was doing that I noticed that the computer had five ads of our home network, so I put all the profiles of their trust, apply changes and tested to see if it would work. On the wireless internet in the office where the ethernet cable and a router are by train, it's good, it works. I connected the wireless network and disonnect the ethernet then on the internet and there is no break in service. But if I shut down the computer and set up in my room at 12 meters, it won't work with signal strong (4 / 5 bars are green).

  This morning I watched the windows firewall settings and changed some of them to see if that makes a difference. but none.

  I'm trying hard to think about this problem but I'm getting nowhere fast, I know just enough. I just tried pluging in the wireless network adapter again, but there is no wireless network connection now and no internet connection:

  After having tried downlaoding a new driver and this has not fixed the problem after having only tested the wireless signal is strong enough for good internet connection to my mother's computer in my room, I'm stuck. I looked on the netgear site and follow their advice, but it's really a night Mare!
  I also noticed that somehow, we put in place five versions of our home network, I wonder if there is some confusion computer... I looked into the idea of the removal of the networks, and it seems that you can not do. I am trying to back up my files, uninstall everything and re - build my computer from scratch. If there is something else I should try before taking this message please drastic measures me ASAP.

  Hello

  1. What is the operating system installed on your computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What the * happened to my Windows Vista program earlier this week? I don't know what I did and I had nothing else but BIG TROUBLE SENSE HELP!

  After sevice pk 2 I did nothing but chase problems, 10 pilots down in a single night. Now it starts only in safe mode byitself and system restore it impossible of access that has not helped the only time where he worked finally unable to access updates windows either. At Mr fix it to work on things for houirs, but now his party and I cannot get safe mode and its so limited after problems, I spent this week all treat them w/problems. I don't know what else to do and I don't know what tpo events cause this Nightmare.Iam now crazy and lost, help me!

  Hi Claudette Russell,.

  ·         What is the full error message?

  ·         What happens when you try to start in safe mode or normal mode?

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Perform a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: Restoration of system Windows Recovery (WinRE).

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: Perform a check disk (Chkdsk).

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: When running Chkdsk on the drive if bad sectors are found on the disk hard when Chkdsk attempts to repair this area if all available on which data can be lost.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Qualcomm Atheros Bluetooth drivers for Alienware 14

  I'm pulling my hair out trying to find the drivers for the Bluetooth installed on my Alienware 14. Since the upgrade to Windows 8.1 none of my audio devices no longer works.

  The drivers from the Dell site are super stale and no help at all. Anyone else able to solve this problem? Because unless you disable Windows updates Microsoft strong arms you by switching to Windows 8.1 now 8.

  Unfortunately, nothing I can't even my mouse to match now. Everything worked fine when running Windows 8.

  Update found this

  

  the second pilot down through the top actually worked like a charm.

  Huzza to terrorize my wife with extremely strong fights on Injustice and Xenoverse.

• WiFi pilot slows down the closing of Windows 7

  Since I installed the new driver for Ralink Wireless LAN RT3572, it slowed the computer "Shut Down" for more than two minutes, I can't compromise uninstall it because it connects to 3 times the speed of the former driver, is there a work around for this annoying question?

  Changing the value of 'WaitToKillServiceTimeOut' in the registry did not a thing. Disabling all other programs and start-up services did nothing either, only by uninstalling the driver Wi - Fi done shuts Windows down without any delay.

  Hello

  Check with any 3rd part antivirus/security program where there is a conflict with a
  of them. You can reinstall the driver and uninstall 3rd party antivirus then
  Run the removal of its creator tool to see if that clears the issue. Use the clean boot method
  to see if any conflict can be determined. (Even if the chances are, it's the driver itself.)

  MyEventViewer can be verified at the time of the event within a second or so of the
  time of the event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  =========================================================

  RALink is now Mediatek.

  You must contact Ralink/Mediatek support and/or the manufacturer of the device OEM otherwise Ralink
  as there is obviously a problem with this driver. If there is also a separate device OEM manufacturer
  check in their forums (if any) for known issues.

  RALink
  http://www.ralinktech.com/en/index.php

  MediaTek
  http://www.MediaTek.com/en/

  RALink - Support and downloads (check with the system manufacturer Maker/motherboard or the)
  1 real device manufacturer.)
  http://www.ralinktech.com/en/04_support/support.php?SN=500

  MediaTek - Downloads - drivers and Firmware (check with system Maker/motherboard
  Producer or manufacturer of the 1st real device.)
  http://www.MediaTek.com/en/downloads/

  MediaTek - contact us
  http://www.MediaTek.com/en/about/contact/?contact=WiFi-technical-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Epson stylus nx415 pilot not down loaded

  I down loaded a driver for my epson stylus NX415 to internet on the epson site, and I have windows 8. It says its compatible but it keeps giving me an error that it is not compatible! Does anyone have a suggestion?

  Hello

  You can download the drivers designed for Windows 7 and install it on the use of the compatibility mode of Windows 8. Follow the steps.

  Method 1:

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run for earlier versions of Windows programs

  (e) click Next, select do not appear. Click next

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click Next, click the troubleshooting program

  (h) check the program worked in earlier versions of Windows, but that will not install or run box now

  (i) click Next, select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Method 2: Epson Stylus NX415 all-in-One Printer

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128287&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_8-32

  Follow the method below on how to install a printer.

  Method 3:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Be sure to update all the drivers to the latest drivers of Windows 8 and also run Windows updates regularly.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Satellite C50D-A-12 x often - block pilot WudfRd

  I have a Toshiba satellite C-50 d-a-12 x with windows 8.1 and often it crash and sometimes arrest.

  Appears in the event log each time as an Advisor:

  Registro Nome: System
  Origin: Microsoft-Windows-Kernel-PnP
  Data: 22/01/2014 12:45:37
  Event ID: 219
  Categoria Attività: (212)
  Level: th
  Word key:
  User: SYSTEM
  Computer:
  Description:
  Impossibile caricare he pilot \Driver\WudfRd by he device SWD\ SensorsAndLocationEnum------LPSensorSWDevice.
  

  What should I do?
  Thank you

  Hello

  It seems that the driver / service WudfRd causes the system crash.
  After Googling around it seems that other people have had similar problems of system.

  The WUDFRd is a service and it is called 'Windows Driver Foundation - User-mode Driver Framework' which is also responsible for USB devices

  I recommend you to disconnect all devices that you had connected to the laptop s USB ports. You should also uninstall all USB hubs that appear in Device Manager, then restart the laptop.

  You should also go in .msc services and search for Windows Driver Foundation - User - mode Driver Framework. Check the status of this service. It should usually be set to manual.
  Under 'Status', it could be set to off.
  If you pluggin installed a USB, status go to "started."

  Try to change the startup type to "automatic". Then shut down the laptop and restart. Then check the status again to see if it is still set to automatic.

  I recommend you to test and control the features of the laptop without connecting all USB devices. Then plugged a USB device again and check if an error pops up or system would break.

• M4C63UA HP #ABA stream: a pilot missing and 2 devices work does not correctly

  So, I recently switched to Windows (32 bit) 10... My netbook has only 32GBs so I thought that I get more space by using 32-bit and I have a lot more now.
  
  But minor issues however, I can't seem to get the touch screen to work or find the drivers for it.
  
  I also have an invalid driver; PCI encryption/decryption controller.

  

  And I also have two devices in Device Manager when windows cannot load the drivers required.

  

  For my touchpad drivers I don't see whatever it is in devices that I think might be them.

  I appreciate any help on all the above problems although 32-bit is not supported. I imagine that the factory can support 32-bit. I got some updated drivers using the driver easy, but I can't seem to update these drivers.

  Hello:

  This should be the driver that you need for the E/D PCI controller:

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the security features of platform such as Intel Platform Trust Technology (Intel PPT).

  File name: sp72335.exe

  Touchpad:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72339.exe

  Unfortunately, I can't help you with the problem of the touch screen.

  The graphics driver that control it.

  For the other thing of the Intel Atom, please view the hardware ID of the device.

  You can find that by clicking on the watch your screenshot Details tab, select the 3rd item in the drop-down (hardware ID) and after the string of characters that appear in the window.

• BSOD (pilot Consumer IR and IR receiver)

  So I was do the BSOD and I went into (safe mode) Device Manager and found that my device (CID) Consumer IR in my system devices has something wrong with it, then I scrolled down to look in the USB controllers, it's something called "eHome Infrared Receiver (USBCIR) has something wrong with it also!

  I don't know what to do, I checked the two updates, and people with disabilities the two of them and restarted my computer.
  I don't know if one of the dysfunctional pilots affect the other. Please help, don't know what to do! Thank you
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  The system configuration utility MSCONFIG, is here
  
  
  
  
  Team Zigzag3143.com  

• Color LaserJet MFP M277dw Pro: Pilot error install Windows 10

  I get "error A fatal error occurred preventing use of the product" while trying to install the printer driver on a computer Windows 10. This printer was purchased at the end of 2015. I tried all the drivers from the first pilot was released and none of them work on Windows 10. I tried to install the printer driver when connected on USB and wireless.

  Hi @Andrew8811,

  There are other drivers, that you can try if you have trouble downloading the software from the HP website.

  Here are a few options to get the drivers for your printer.

  HP EasyStart

  Windows driver for an HP printer

  HP Universal print driver

  If you are still having problems installing after trying the above drivers, you will need to contact HP for further assistance.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Error in the system falls down with STOP 0X0000008E

  My crashes system with Stop error 0X0000008E who it is and how I can fix the problems... Thnx for any advice

  Stop error 0X0000008E (0XC0000005, 0XBF2CF595, 0XA2ED7BA4, 0x00000000)

  igxpdx32. DLL-address BF2CF595 base at Bfl86000, DateStamp 00000000

  Beginning physical memory dump

  Total physical memory dump.

  Without more information, we can only speculate...

  If this happens whenever you watch a video, it's a good clue that the problem could be in your audio or video configuration, then you should start looking there.  Then, if you make adjustments, you can check your known failure scenario (watching a video) and see if the problem is resolved.

  These are the same questions I ask everyone who has a BSOD problem:

  Please provide additional information on your system, and we have all this and much more.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?

  Can you make the system crash when you want
  ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).
  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
  .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.