Pilot missing after upgrade to Windows 7 64-bit on dell xps 1340

Installed Windows 7 64-bit on Dell XPS 1340. Most of the drivers/hardware work. A system of still unidentified Base and Windows update device / driver downloads dell cannot fix.
State of the device - drivers are not installed (code 28)

name of the physical device object - NTPNP_PCI0024 to bus PCI 1, device 7, function 3

Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
etc.

Help, please. Thank you

Hello
Here is the site of Dell support for your model. You will find all the drivers for Windows7 64 bit.

Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
It is the Ricoh card reader .

Driver so that it is on your article of chipset support site.

If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

If your issue is resolved, please indicate then your wire is with solution.

Tags: Windows

Similar Questions

  • Pavilion dv6: pilots missing after upgrade to windows 10

    The following drivers are missing after the upgrade to windows 10:

    Hello:

    For the first 3...

    This package contains the driver for laptop models JMicron card reader supported and operating systems.

    File name: sp45046.exe

    For the last one (0004), you need this driver...

    This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

    File name: sp61037.exe

  • Folder my documents is missing after upgrade to Windows 7

    Original title: MJ has upgraded to windows 7 ultimate

    I just upgraded to windows 7 ultimate and now find my documents folder is missing, I have tred everything including checking my old windows files, but nothing is, can anyone help

    Hi Mike,.

    Please answer a few questions to refine the question.

    1 are you referring to the "documents" folder in Windows thelibrary?

    2. did you check the exact location of the folder "documents" in Windows 7?

    3. from which operating system you have upgraded to Windows 7?

    4. have you received an error during the upgrade to Windows 7?

    Method 1:

    As was the Document and Settings folder in Windows XP Pro in Windows 7 does not have access to any user, as it is a protected file. The folder you're talking has now been replaced in Windows 7 with the USERS folder. And you can also access the folders of documents in libraries. You can search the documents folders in C:/Users/user_name.  If the problem persists, proceed to the next step.

    Method 2:

    $INPLACE. ~ TR and $WINDOWS. ~ Q are leftover folders created by Windows during the upgrade process, if there is no error while upgrading files may be saved in these files.

    Individual records will be hidden by default and you can view the folders to view the folders. You can look in the C: drive.

    Reference:

    Show hidden files

    http://Windows.Microsoft.com/en-in/Windows7/show-hidden-files

    I suggest you to refer to the multiple suggestions in a similar discussion.

    Files or folders 'Documents' are missing after the upgrade from Vista to Windows 7

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/ff3ec878-6770-436f-b80a-2612ebc3c310

    Hope this information helps. Response with status so that we can help you.

  • Drive letter missing after upgrade to Windows 7

    After the Vista Premium upgrade to Windows 7, the letter of partition and recovery disk do not appear in Windows Explorer.

    Have you installed just Win7 upgrade or maybe clean install of Win7?
    I updated several laptop computers, and something like that doesn't happen. Just if you have deleted the existing partition.

    By the way: there is no recovery partition. Recovering files is saved in the folder HDDRecovery on the second partition of HARD drive.

  • Yoga 2 Pro - sleep setting missing after upgrade to Windows 10 RTM

    Here's another interesting event. I use sleep mode all the time, that's what happens "when I close the lid. After upgrade Windows 8.1 for Windows 10 RTM, "standby mode" is not found. "when I close the lid" and related parameters in power management have an empty selection, sleep does not appear in the drop-down list of choices. It seems revenue to "Put to sleep" by default. By reading the other Windows 10 forums I know sleep is supported in Windows 10, how can I get that back? I tried to download and install the latest driver for power management (as dated 17/07/2015, I think) but I get the message that "you already have a newer version of the driver installed", I cancelled out of the facility. Are there newer drivers planned for soon? I can shoot with Microsoft Basic Display Driver (3200 x 1800 only, see my other ad in the forum), although I used a different resolution in Windows 8.1 and hibernate instead of mode 'sleep', but I hope that these features will work soon. Thank you, Bob

    * Sleep is back * after having solved my problem of graphics driver. Fixed. See the thread «driver Intel HD graphics on Yoga 2 Pro fail after...» "for more details. Cheers, Bob

  • CD/dvd drive missing after upgrade to Windows 10

    I have an Aspire 7551 G. Shortly after the upgrade to Windows 10 my cd/dvd drive has disappeared. If I put a cd in the drive nothing happens. The drive is not even appear on my computer more. If I open Device Manager it is listed under "Other devices" with a question mark. It appears as OPTIARC DVD RW AD - 7585H. How to bring back my cd player?


  • NFC power option is missing after upgrade to Windows 8 for windows 8.1

    Recently, I upgraded my Sony Viao F15218SNB of windows 8 for windows 8.1. Now I have problems with the options of the NFC. Before, I had the opportunity to become the NFC adapter power on and off (like the ability to enable and disable the wifi and bluetooth) but now after the upgrade to windows 8.1 I can't find this option for NFC anywhere. Help, please.

    -Nathalie

    Aakash_04 wrote:

    Recently, I upgraded my Sony Viao F15218SNB of windows 8 for windows 8.1. Now I have problems with the options of the NFC. Before, I had the opportunity to become the NFC adapter power on and off (like the ability to enable and disable the wifi and bluetooth) but now after the upgrade to windows 8.1 I can't find this option for NFC anywhere. Help, please.

    -Nathalie

    It's under settings/network/airplane mode Charm Bar/settings/PC

  • MSVCP110.dll missing after upgrade to Windows 10

    Just upgraded to Windows 10 and now don't want to start any of the Adobe Creative Cloud applications. Receive "the program can't start because MSVCP110.dll is missing on your computer. Try reinstalling the program to fix this problem. "I tried to reinstall, but it does not help. I'm under CC 2.2.0.129.

    See this thread for the fix: Windows 10 breaks CC apps - MSVCR100. DLL not found

  • Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

    I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

    I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

    When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

    He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

    Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

    If I end up installing a new Ethernet card going to work?

    Any suggestions?

    Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

  • Reinstall Visio after upgrade to Windows 7 64 bit

    Hello everyone. I installed Windows 7-64 bit. My upgrade went without a hitch except to reinstall one of my Office programs. I am trying to reinstall Visio Professional 2003, however, my first legal installation disc is Visio 98. Windows 7-64 bit will not install this version, so I'm stuck without a track to upgrade in order to activate properly. How to work around this problem. I tried to join the team of Visio, but I see that they want to get my credit card on which I am not too happy to... Help... Please...

    Thank you.

    E-mail address is removed from the privacy *.

    I know it's late to this thread over 3 years, but I recently found this problem on the copy of my dad from win7 64.

    With success, I was able to install 4.5 Visio standard, Visio 5.0 update and upgrade Visio 2002.  Everything worked successfully on win7, but the older versions had some quirks to fix in the installation process for 2002 to see them on the hard drive and to recognize as valid evolutionary products.

    The main problem is that version visio 4.5 and 5.0 used an old 16-bit installshield Setup program.

    The applications themselves are 32-bit and will be running in compat for windows NT 4.0 mode in win7 64-bit.

    My solution was to get a program that will extract the old cab of installshield used on the cd files.

    The file to extract cd is called 'data.z' and you must check out it in a good location on your hard drive.

    I used the program Universal Extractor from the following site:

    http://legroom.NET/software/UniExtract

    the extraction method used was i3comp.

    Once the records from HD, I created a shortcut to the executable visio in the extracted folder, in the properties of the shortcut I went to the compatibility options and click on it to change the settings for all users.  Here, I did the program running under Windows NT 4.0 and run as administrator.

    I then tested successfully the Visio 4.5 and 5.0 with this method to ensure that any registry or ini file stuff needed by the installer of 2002 would be easier.

    After I checked they were running and working on win7 64, I put in the 2002 Update CD recently bought new by the amazon seller.

    Setup has found the copy to hard disk, and I told it to install over Visio 5.0 on hard disk folder.

    When I launched visio 2002, he asked to activate, I then just let my dad continue the activation process of Visio 2002 update because it was actually him who had bought and she belonged and was installed on his computer.

    He had worked for a couple of hours and finally had put on his machine virtual windows xp win7, but wanted on his real win7 64 bit installation.

    I had the chance to help her for about an hour, and it was enough time to understand the problem and get Visio 2002 working for him.

    I note that there is a point in the installation process when upgrade version wants to find the old copy to upgrade, he will try to get the hard disk and you will almost seem to be frozen, but the style hourglass turns the pointer of the mouse circle will be always moving.  As long as you wait outside it will be eventually find the older version installed.

    Finally, on my father's computer, there are more than 1 million files from different programs and documents to go, after about 5-6 minutes setup are the old copy and continued.

    After it's done only internet activation is required.

    Hope this helps someone.

  • Runes of Magic will not play after upgrade to Windows 7 64-bit

    Have upgraded to window7 64 bit that I use now the 8 GB of ram

    Runes of Magic was playing on my old windows version but usually install a new

    Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

    Game Launcher now returns but crashes after I selected the game

    Any help would be greatly appreciated

    Thank you

    Hello

    1. have you made changes on the computer before this problem?
    2. What is the full error message or error code?

    I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

    Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

    How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

    Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

    Note: Runes of Magic is compatible with Windows 7 64 bit

    Reference:
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

    Note: If you still have the problem then I suggest you to contact the game manufacturer.

  • Portege M700 falls down after upgrading to Windows 7 32 bit

    Dear all,

    My portege M700 laptop played most of the reliable time.
    However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

    I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

    I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

    Can someone help me to diagnose the cause of these accidents?

    Thank you very much

    Chris.

    Hello

    It is difficult to say what might cause this behavior strange system.
    But you said something about the hot deal and fans begins to spin faster

    It seems that the internal temperature of laptops increases to a higher level.
    A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

    What to say that you should check the Win 7 power management settings.
    There are many options that could decrease the performance of the processor and increase the cooling.
    In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

    Hope this helps you

  • Blu Ray does not work after upgrade to Windows 7 64-bit

    Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

    I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

    When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

    Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

    Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

    Hello

    After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

    The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

    Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

    Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

  • Audio Cup after upgrading to Windows 7 64 bit

    I recently updated a workstation reasonably powerful BOXX made from Windows XP to Windows 7 64 bit.  The only thing that does not seem to have gone well refers to audio.  Any application I play audio, it cuts out / falls for about one second every 3 to 10 seconds.  In Adobe first CC Pro and Adobe Audition CC, sounds cuts out.  When I play a video directly on YouTube, he stops and sometimes even lets out a nervous cry, so I don't think its a problem to Adobe.

    Workstation BOXX, with a NVIDIA Quadro K4200 graphics card.  Processors: Two X 5550 2.67 GHz; 12 GB OF RAM.

    Device Manager shows two audio devices / drivers: NVIDIA High Definition Audio; and a Realtek High Definition Audio.

    In case there was a conflict, but it makes no difference, I disabled the NVIDIA driver.  Always cut.

    Interest, sometimes when I have audio playback in Adobe Audition CC on the audio timeline, I can see the time meter stall periodically and restart, not necessarily in harmony with the cuts.  The end of a two-minute audio current reading, audio play is over, but the marker of time has not reached the end of the audio waveform display and moves again.

    None of the above happened before the upgrade to Windows 7.  Thanks for your suggestions, you can provide.

    This sounds like a driver issue, did you test if your hardware is compatible with Windows 64-bit?

    http://Windows.Microsoft.com/en-GB/Windows/Update-driver-hardware-ISN

  • Bluetooth adapter missing after upgrade to windows 10

    Hi all

    Recently, I've upgraded to 10 64-bit Windows on my Dell Vostro laptop. After update, Bluetooth adapter has disappeared from the Device Manager. I have the old drivers for win 7, but these are not being run as the message said "this application cannot run" or things to that effect. I tried to install the Lenovo drivers as suggested, but this is not successful because he wants me to uninstall existing bluetooth drivers. For the life of me I can't find these anywhere. Any suggestions?

    Bhatta,

    You can click on the link below to see the youtube video that shows a possible resolution for your Bluetooth to work.

    https://www.YouTube.com/watch?v=CTo6PZ-QFqU

Maybe you are looking for