Pilot missing nc 6400

Missing a driver for my notebook nc6400.

This is the id of the hardware

ACPI\IFX0102
* IFX0102

Thank you very much for the help.

Welcome to Mbritt.

It is the TPM secure.

First, you will need to install this.

HP ProtectTools Security Manager

Then the TPM.

http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1848274&TaskID=135&prodTypeId=321957&prodSeriesId=1847703&lang=en&cc=us

Select your operating system then go to SECURITY

Let us know how things are going.

REO

Tags: Notebooks

Similar Questions

  • HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

    Hello

    So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

    If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

    I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

    Thanks in advance.

    Hello

    I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

    Kind regards.

  • Pilot missing Balckberry 9800 for my smartphone.

    Original title: Balckberry 9800 device driver.

    I am running windows 7, but cannot associate my BB 9800 properly, because of a pilot missing for my smartphone. Pls help!

    Hello

    You can try to install the latest version of drivers for your Smartphone and check.

    For more information, you can consult the following articles:

    http://us.BlackBerry.com/update/#softwareUpdate

    Automatically get recommended drivers and updates for your hardware

    Pair with a Bluetooth compatible device

  • Pilot missing after that the virus

    After a virus and need to upgrade to Vista, because of all the damage, the virus caused, during the restart I get a message of pilot missing for c:\windows\system32\juporoji.dll.  Anyone know where I can get this driver safely and where it takes place in Windows?
    Thank you

    Google finds almost nothing for it.

    It seems that you can still be infected with malicious software, or have a stay starting entry of for her.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the problem persists, use this program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

  • pilot missing where it is

    c drive was full so installed new more got drive not passed windows 7 Edition family to year and windows 7 edition Professional charge unrelated to my hub high speed. error 651 hardware required relocation or the pilot missing. as it works well with the old drive there is only one thing no driver windows .reloaded twice more same error. (Are they still using us as guinea pigs to sort the bugs in versions of windows is is it just a mistake for once.) Somehow what is the fix

    Hello

    Thanks for posting your query on the Microsoft Community.

    If I understand you correctly, you cannot connect hub high speed and get error code 651. I suggest you to try the steps below and see if it helps you to solve the problem.

    First of all I suggest you to reset tcp/ip on your computer, to do that you can visit the link below.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Change TCP/IP settings

    http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
     
    I suggest that power you cycling your Modem and router might solve the problem, here are the steps:

     
    1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
    2.first, turn off your router and wait a few minutes.
    3 turn off your modem.
    4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
    5. reconnect them and ensure that there is no connection drop between them.
    6.now, turn on your PC and let it boot.
    7. turn on the modem first, and after it is initialized, switch on the router.
     
    You can also try disabling the firewall/security software as appropriate and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
     
    I suggest also refer to this link that talks about the same issue:
    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/af815085-fc76-458A-8116-98a06be817ea/

    Note: Ensure that you enable the security on your computer program.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Satellite M50D - A - 10 L - pilot missing for unknown device

    You just bought a Satellite M50D - A - 10 L and after 1 week, the HARD drive failed. Of course, I had to replace on my spending, because the guarantee would be in about 2 weeks, which was too long to wait for me.
    In any case, I also lost the pre-installed Windows 8.1, but is not a tragedy, because I reinstalled it and everything works well.
    The problem I have I have one of the pilots is not recognized by the "Device Manager". The device is called 'Device ACPI'. Any idea which driver missing is all about?
    Thanks in advance for your answers.

    PS: Do not know how to attach a screenshot of "Device Manager" with missing driver...

    Have you tried to identify the unknown device, through the identification of the seller and device?
    http://www.PCIDatabase.com/

  • HP DC7700: Serial Port PCI and simple Communication controllers pilots missing in HP DC7700 windows 7 (32 bit)

    PCI\VEN_8086 & DEV_2997 & SUBSYS_2801103C & REV_02
    PCI\VEN_8086 & DEV_2997 & SUBSYS_2801103C
    PCI\VEN_8086 & DEV_2997 & CC_070002
    PCI\VEN_8086 & DEV_2997 & CC_0700

    and

    PCI\VEN_8086 & DEV_2994 & SUBSYS_2801103C & REV_02
    PCI\VEN_8086 & DEV_2994 & SUBSYS_2801103C
    PCI\VEN_8086 & DEV_2994 & CC_078000
    PCI\VEN_8086 & DEV_2994 & CC_0780

    Experts in the House should please come to my rescue.

    I just upgraded my Hp DC7700. I was able to get all the drivers except for SERIAL PORT PCI and PCI SIMPLE COMMUNICATIONS CONTROLLER missing. above are the two missing pilots hardware ID

    Hello:

    There is no W7 drivers for these devices.  You must use the Vista drivers and if auto installation does not work, you will need to install the drivers manually by navigating to the folder of the driver that was created when you ran the file from the device in the Device Manager (browse my computer for driver software).

    This package contains the driver Intel Host Embedded Controller Interface (HECI) for access to Active Management Technology (AMT) initiative of the Intel Digital Office for rated desktop models and operating systems.

    FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34743.exe

    This package contains the Intel (LMS) Local Management Service and Serial - over - LAN (SOL) support for the technology of Directors Active (AMT) under the Initiative of digital office Intel for the supported desktop models and
    operating systems.

    FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34744.exe

  • Satellite L850-11 q - pilot missing for PCI Intel Panther Point PCH host

    Hello

    I bought a Satellite L850-11 q earlier this month.

    Having a Windows 7 Prof 64 bit service pack 1 - license (and Win7 Home comes pre-installed), I formatted everything (including the recovery partition, because I tend to make my own backups).

    Of course, I downloaded all the 64-bit drivers available beforehand, but after installing all that I found this driver is still missing!

    I searched on the 'sister' - portable L855 page for compatible drivers, but could find none (reason: * not all pilots are on the L850-site *, for example of stack Bluetooth driver - I got 3 unknown devices after installing all the drivers-L850, both of them could be found on the site L855).

    My problem is that there is always an unknown device in the windows Device Manager.
    Aida64 (a system of monitoring/information, etc. - program) has identified the device to be the

    "* PCI Intel Panther Point PCH - Host Embedded Controller Interface 1 (HECI1) [C - 1]."

    * Updated Windows *-by right clicking and selecting the automatic driver search * can't find anything *, either.

    In addition, Intel has not all drivers as of yet for this chipset (I think maybe it's the 'chipset of the 7 series', and which is not listed, yet).

    I looked for the files here:
    http://Downloadcenter.Intel.com/default.aspx?lang=eng & changeLang = true

    Get any help in getting my hand on the .inf driver/necessary files is appreciated.

    Thank you very much in advance for your time and efford!

    Hello

    Panther Point initially was a name for the Intel express chipsets (QM77, HM77, HM76 and others)

    AFAIK the L850-11 q was equipped with an Intel HM76 express chipset.
    Recommend to install the Intel chipset driver for this chipset.

    Try this one:
    [V9.3.0.1020 Intel Chip Set Utility for Windows 7-64 bit: http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7501 selSh ortMod = null & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 82019 & OS ID = 30 & driverLanguage = 42]

  • Pilot missing 6300 MT

    Have a HP 6300 MT win 7 Pro x 64.  A pilot is missing.

    Hardware ID

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_339A103C & REV_04
    PCI\VEN_8086 & DEV_1E22 & SUBSYS_339A103C
    PCI\VEN_8086 & DEV_1E22 & CC_0C0500
    PCI\VEN_8086 & DEV_1E22 & CC_0C05

    It is the device of management-Bus system of the chipset controller intel in your motherbooard.

    The drivers of your PC are here in support of HP servers.

    Install the Intel chipset drivers. Who takes care of the missing driver.

    Please post your results here.

    Best regards

    ERICO

  • Windows 7 Setup fails because of pilot missing (HP Pav 500 - 417ng with Win 8.1)

    Hello

    I added an SSD for my hp pavilion 500-417NG and want to install Windows 7 64 Bit including SP1 for the SSD.

    I use a USB key to start the installation of Win 7 program.

    The installation program starts as usual, lets me select language, keyboard, etc. and start installing.

    It generates an error, indicating a pilot is missing and only provides options for search or try again.

    I have downloaded all the drivers HP Win 7 and made available in a folder that is accessible during the installation, but the pilot will not be found.

    So I need to cancel the installation.

    Any ideas?

    KR,

    Tarek

    Hello

    EFI USB startup key to use with TPG.

    You should be good to go.

    Jaco

  • G7 2233 pilots missing after windows 7 ultimate 64-bit new installation

    Hi - I received the computer modeled above with 8 pre-installed windows. I installed a clean install (wiped readers) and installed the operating system Windows 7 Ultimate 64-bit. When I did, none of the internet connections would even work. I since found (somehow) a pilot who was consistent, which deals with the missing wifi adapter, but I still need the following items:

    Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_184B103C & REV_05

    PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01

    UNKNOWN DEVICE: ACPI\HPQ004

    I can't find these anywhere, PLEASE help.

    When you request support, please provide the HP model name and/or product the full number of the computer in question.

    Assuming that you have a HP Pavilion laptop g7-2233 cl, specifications, other than the CPU, the RAM and the size of the screen, seem to be the same as my sister-brother g6-2210us laptop HP Pavilion computer. Drivers 64-bit of Windows 8 listed for two computers are the same. I installed Windows 7 64 bit on his computer about a month ago and used the following drivers of multiple origins;

    Drivers for Chipset AMD (Chipset, USB 3.0, SATA/RAID)

    AMD Catalyst Display Driver

    Realtek FE family LAN Driver 

    HP sp54972 Atheros 5xxx/9xxx WLAN Driver

    HP IDT HD Audio Driver sp59620

    HP sp58539 touchpad driver Synaptics PS2

    HP CoolSense sp60051

    and from Windows Update "HP Mobile Data Protection Sensor.

    It is possible that the WLAN chipset on your machine is different and may require different drivers.

    I've also updated updated the Synaptics driver to v16.2.21 on Synaptics site. Some of the factors above may require the HP sp59202 software framework. In addition, the WebCam requires the package of "VideoCM" of the "SWsetup" folder in the original installation of Windows 8 and CyberLink YouCam sp59986.

    When you are finished, there is no unknown device on its system.

    Please send Bravo

  • Pilot missing: ACPI\TOS6208\2 & DABA3FF & 1 error Code 28

    Hi all

    Miss me this driver and I cannot locate it on this Web site or the manufacturer's website. Any help is very appreciated.
    The laptop in question is running Windows 8 Pro and it is a Toshiba Portege R705 P35. I think it's originally a Violation of CPD watchdog on my pc. Thanks for any help.

    Thanks for the reply, but the problem has been resolved. The driver is for device Toshiba added value logical and general purpose. The PVAT pilots had to be installed from the Toshiba site.

  • Type options pilot missing in jdbc connections

    Hello

    I have some difficulty to add and modify jdbc connections in BI Publisher, Enterprise Manager. I have deployed the BI Publisher app on a wonderful oc4j container, and when I try to add/edit a jdbc connection, I'm not able to choose a Type of "pilot". The drop-down list is simply empty. The Type of 'pilot' is necessary if you want to save the jdbc connection. My questions are;

    -Why is this menu drop-down empty? (Missing a few pots?) `
    -Where BI Publisher Gets the Type options "pilot"?

    Hope someone knows the answer

    Kim N

    You will find people,

    OracleBI\xmlp\XMLP\Admin\DataSource\jdbcdefaults.xml




    Description = "" Oracle 9i / 10g / 11g ""
    Driver = "Oracle.JDBC.OracleDriver"
    URL="JDBC:Oracle:thin:@[host]:[port]:[SID]" / >

    Description = "Oracle 8/8i"
    Driver = "Oracle.JDBC.Driver.OracleDriver"
    URL="JDBC:Oracle:thin:@[host]:[port]:[SID]" / >

    Description = 'Oracle BI Server'
    Driver = "Oracle.BI.JDBC.AnaJdbcDriver"
    URL = "jdbc:oraclebi: / / [host]: [port]" / > "

    Description = "Microsoft SQL Server 2000"
    Driver = "com. Microsoft.JDBC.SqlServer.SQLServerDriver ".
    URL = "jdbc:microsoft:sqlserver: / / [host]: [port];" DatabaseName = [dbname]"/ >

    Description = "Microsoft SQL Server 2005"
    Driver = "com. Microsoft.SqlServer.JDBC.SQLServerDriver ".
    URL = "SQLServer: / / [host]: [port];" DatabaseName = [dbname]"/ >

    Description = "IBM DB2 Universal Database.
    Driver = "Hyperion.JDBC.DB2.DB2Driver"
    URL = "jdbc:hyperion:db2: / / [host]: [port];" DatabaseName = [dbname]"/ >

    Description = "Sybase Adaptive Server Enterprise.
    Driver = "com. Sybase.jdbc3.JDBC.SybDriver ".
    URL = "jdbc:sybase:Tds: [host]: [port]" / > "

    Description = "Teradata.
    Driver = "com.ncr.Teradata.TeraDriver"
    URL = "jdbc:teradata: / / [DatabaseServerName]" / > "

    Description = "MySQL".
    Driver = "com. MySQL.JDBC.Driver ".
    URL = "JDBC: / / [host]: [port] / [database]" / > "

    Description = 'other '.
    driver = "com."
    URL = "" jdbc: "/ >"

  • HP Pavilion 11 x 360: pilot missing PCI encryption/decryption controller

    Hello

    In my Manager under the other devices, it shows the encryption/decryption PCI controller missing the driver. I tried to find out using windows update and it cannot find a driver. Can you do me correcting t driver for this?

    Thank you

    Steve

    Hi, Steve:

    Download and install the driver Intel Trusted Execution support page for your laptop.

  • Satellite A200 - 1 M 8 pilot missing to control memory PCI

    Hello world. As the subject says, I am missing a driver for the PCI on the above mentioned Toshiba memory controller. There is the driver for Windows XP and Vista, but there isn't one available for W7. This driver is apparently available in the package of Robson. I tried the one for Vista, but it's no party.

    All solutions?

    It is Windows 7 Enterprise, 32-bit.

    Hello

    All these Satellite A200 Toshiba page use us the same chipset driver Windows 7 beta.
    You can see if you choose for an A200 Chipset driver and then you can see of the models involved.

    Good luck! :)

Maybe you are looking for