Pilot NI VISA - problems of driver installation wizard

Similar Questions

• I use a computer laptop gateway t-series and have problems with driver installation

  Original title: driver installation problems

  I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?

  Hi Speete66,

  ·         What is the exact model of the laptop?

  Visit this link to download the drivers for Gateway Laptop:

   

  http://support.gateway.com/support/drivers/ddaStepMain.asp

  You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if this information useful.

• Problem of driver installation Intel Turbo Boost Tech version 1.2.1002 Rev A

  I downloaded the new version of intel turbo boost tech version 1.2.1002 rev A for my HP laptop G6-1051EX and install, but get an error of this kind and how can I solve this problem.

  This computer does not meet the minimum requirements for installing the software. "

  Your response is much appreciated... Thanx.

  -System information-

  Computer name: *-HP

  Operating system: Windows 7 Home Premium 64-bit

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  Model: HP Pavilion Notebook PC g6

  BIOS: Version InsydeH2O 03.61.01F.15

  Processor: Intel (r) CPU of Core i5 - 2410M 2.30 GHz (4 CPUs), ~2.3GHz

  Memory: 4096 MB RAM

  Available OS memory: 4044MB RAM

  Page file: 2174MB used, 5911 MB of available space

  Name of the card: Radeon (TM) HD 6470 M

  Manufacturer: ATI Technologies Inc.

  Type of piece: ATI display adapter (0 x 6760)

  DAC type: DAC (400 MHz) internal

  Memory display: 2778 MB

  Dedicated memory: 1012 MB

  It is not a driver of criticism, as long as TB works I worry install latest.

  Some processors do not use the pilot of TB, it's inheriting in the processor itself.

  Use this software to make sure that TB works

  http://www.Intel.com/support/processors/sb/CS-031441.htm

• HP Deskjet 3520 series problem the driver Installation of class after the victory 8 recovery

  Hi.I am Leonidas of the Greece and I am trying to solve this problem in the last 5 hours, my nerves are in very bad condition.

  I used this printer daily for many months without problem, but a few days before, it was necessary to do a restore of windows 8 due to a problem. So today, I tried to reinstall my deskjet 3520, but I can't, everything I tried. The begginning I started with the installation cd. I could see the 3520 to my device at the Control Panel, I could see it in my network, but it was not possible to print. So I reinstalled deskjet 3520 and I installed it again but has not solved the problem. The system stop at step who wonder if the printer has wireless and I say Yes so he asks me the IP address or the computer name. I write the IP address (I know because I managed to print the test page to the thw first time of installation), but I can't spend the extra step because "the computer and the printer are related to different routers".

  Please give me a solution... I look forward to hearing your response.

  Thank you

  Hi again,

  By your final details I could understand that the printer is disconnected from your network, and therefore it cannot be.

  Please try as below and let me know what happens:

  1. From the front panel of the printer, enter the configuration menu, select Tools and then select Restore Factory Defaults.
  2. From the front panel of the printer, go to the menu of wireless by clicking on the wireless icon, select Restore Defaults and confirm by selecting Yes.
  3. Disable the pritner.
  4. Re-turn on the pritner.
  5. If the software exists on your laptop, open the HP Deskjet 3520 and select Connect a printer using a wireless connection, if it was removed to perform the installation of the software, select Wi - Fi.

  Now, you should be prompted with the steps to connect the pritner to your network wireless during the configuration of the wireless device.

  If you still experience a problem, temporarily connect the printer with a USB port and then to open its software.

  Click on the Tools icon and select Convert USB to wireless connection to reconnect it to your network.

  Shlomi

• Re-install PE 1.0.1 on Windows 7 OS - problem with the installation wizard saying IE 0.4 or more?

  I have Photoshop Elements 1.0.1 and I know that its an old version but its suitable for what I use it for.  I have the serial number and the disk.  My computer crashed and needs a new.  I have a Windows 7 operating system, and my IE is the latest version.  But when you try to install Shield Wizard Installation stops during the process, and a message appears saying that "the program cannot run that on Internet Explorer 4.0 or higher and must stop installation.  I don't understand why I get this message that I checked and I have the latest IE?  Y at - it a setting I need to change?  Any help would be appreciated...

  Hi Drugmand,

  Photoshop Elements 1.0.1 is a very very old and is not compatible with Windows 7.

  Please consider buying the latest version 12.

• problem of driver installation wireless network for computer notebook dv7-6c20us

  I installed Windows 7 Professional but do not have a set of drivers for the computer.  I can't get the wireless NETWORK card driver to install.  I downloaded the drivers from the HP site and they will not properly install on the computer.  I do not know the manufacturer of the wireless hardware, so I can't go to the appropriate site.  I tried to use HP scan tool, but it will run on the computer.  Chrome, the button does not even operate.  In Internet Explorer, the scann button depresses but nothing happens.  Help!  Thank you!

  Hello:

  No wonder you had difficulties to find the wireless driver.

  According to the list of parts for your laptop, it comes with the adapter PCIe half minicards (HMC) WiFi Realtek 8188GN.

  The driver for this model of card is not on the page support and driver for your model.

  Here is the link to the driver for this card.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Problem with driver installation Home Server

  ^{Yet another question!}

  I had a bad day with ESXi today, nothing worked and I am still to get a guest OS installed and work after hours of banging my head against the server.

  I am trying to install Windows Home Server, I have a bootable DVD for it, but it fails with the error:

  "hard disk capable of hosting windows home server is not found."

  After Googling, I find that I need to download a SCSi driver and put it on a floppy disk.

  First of all, my floppy drive on my client did not work so I went along to a neighbor, he had no one, so I then drove to my nearest neighbor who said he had a working floppy drive.

  File: ESXi_WinXP.flp is too large to fit on the disk! It didn't matter what we tried it wouldn't fit. Then we researched on the VMWare site for another driver, but it was too big for a floppy as well.

  Where I am goingwrong and why is it so difficult (for me)

  Thank you, again.

  you have really no need put one flpppy image btrue diskette - you can point the flp on shared storage image - as you do an ISO for cd rom image.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• HP Envy 17-2100ed: problem with the installation of a driver on my laptop

  Dear readers,

  I have some time for problems with the installation of the drivers on the HP site. Whenever I chose a driver, such as for the Cyberlink Youcam software, the download process will be blocked at 28.9 MB, a total of 154 MB. I also tried to install the software for my HP printer, but once the same question.

  Can someone help me? Thanks in advance!

  Kind regards

  Amir

  Hello @Amirkalloe,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of driver and he wanted to help!

  Problems installing drivers, or by downloading the drivers?  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.

• Problem drive Installation in Windows XP Professional Version 2002

  Hello, I had problems with my Installation of Windows XP Professional disc, that is authentic. I run the Setup, everything is going very well... I get the "Welcome" screen I press F8 and then he said something in the sense of "we see that it is empty and almost died, go buy another drive of installation if you are qualified or something." It is a legitimate disc, I used this before a long time ago, and I have still 3 uses on it. I check my settings, all right, and the computer was made for Windows XP.

  Is there something wrong? What I really need to get an old installation disc, which will probably costs me about $ 50 just to get shammed?

  Please answer.

  Thank you

  Voizak Gyrith

  1 CD can get damaged or dirty, but...

  2. to learn more, you must provide the exact text of the error message.  It appears from your description of the error message, if you have an installation CD 'upgrade '.  What is the screen that you see? -->

  

  If that's what you see, you will need to find a CD for one of the listed versions.  You should be able to find one of these for not much money... very few people is eager to something like Windows 95 install these days.

  3. you shouldn't be pressing F8... at least not with a normal Windows XP installation CD.  For the sequence of screens, you see, look here--> http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

• OfficeJet Pro L7780 Driver installation fails

  I got an Officejet L7780 printer for three years and it seems to work fine.  I plugged it in as a cable network on my network printer home.

  I am able to navigate to the web page of the printer.  I am able to print to the printer from other computers.

  My PC is running Windows 7 Ultimate, fully patched with all updates.  I am trying to install the latest drivers (version 14) downloaded from HP's Support web site.  I tried to use the installation wizard, as well as download the drivers directly.

  My problem started a couple of days when I tried to scan a document to my PC via the network.  Analysis failed and the message on my computer says the drivers were not installed properly and I need to reinstall them.  I have uninstalled the drivers and tried to reinstall them.  The installation process gets through the initial phase of installation, but when he arrived at the point of the preload of the pilot and fails.  The dialog box presented has a red 'X' in it with no other information available.  Here is an example:

  

  The software attempts to clarify the error, and that's what he found:

  

  I tried to connect the printer via the USB port and install the drivers in this way, but it fails with a similar error message - the only difference is he's trying to use autorun_usb.inf instead of autorun_network.inf as shown above.

  I have an L4 uninstall by running the Uninstall_L4.bat file in the downloaded driver files.  After L4 uninstallation finished and I restarted my PC, installation failed exactly at the same place.

  I ran the installer with administrator privledges, and who do not have the same way.  I have enabled the administrator account and installed the drivers as administrator; has as well.

  I ran a registry (CCleaner) analysis tool and which found no errors in the registry.

  I unplugged the printer, reset the router and checked the network settings on the printer.  Everything seems correct.  I don't think that the problem is with the printer more precisely if the installation fails before it installs all the drivers or detects all available printers to install.

  If anyone has any ideas as what to try next, I'd love to hear them!

  Thank you

  Bob

  There is no documentation for what to do. It's one of those things you need to know how to do it. I would like to explain it, but I don't know that I could explain it clearly. I don't know the exact price more. In my view, which varies by country. They helped me with a problem, and like you I tend not to call unless it's a big problem. Remember, this was before I started working for them.

• The ATI driver installation cannot find the previous installation?

  Hello

  Yestreday, I wanted to update my current graphics driver AMD high definition and so downloaded the latest version. Before installation, the installation wizard stated that no previous directory was found and would create a new. That didn't make much sense to me, as I already had the previous version of the driver on my laptop. After a bit of research, I realized that the previous version was installed in the program (x 86), and the new system would be installed in Program Files instead

  My question is; I still want to update the driver and how do I go about this? Must delete the existing one and install the new drivers?

  My laptop model is dv7 - 4198ca with ATI Radeon HD 5470 Switchable Graphics.

  Thanks in advance.

  I have a laptop different but the same 5470 video card. Update all video pilots made me a lot of problems, I had to restore a former win7 restore point to get the Panel to catalyst and switchable graphics to work again.

  During the update, I was warned with the same message as you (no previous directory).

  I suggest, if you dare, to update the drivers ONLY (for version 1.771 I guess) choose updated manual and then uncheck the other characteristics (catalyst, frame MS C++, etc). I also suggest you to create a manual restore point before starting.

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.