Pilot of the AGENA

I've written in the past weeks I have been troubleshooting a LabVIEW 8.6 program to control our Agilent E5071C ENA.  The program is designed for calibration of the Network Analyzer (measure calibration data and calculate the calibration factor) and store the State of the instrument after calibration.  I used the AGENA (AGilent ENA) driver to write the program.

Here's my problem: the program works perfectly until the "Measure of calibration Data.vi" command is executed for the first through cal.  In other words, that same VI appears six times before in the program (for short, open and load on a callus of two ports) and produces no error.  When he tries to run the cal through, I can look at the ENA screen as he sweeps, but when scanning for the first through cal is complete, the device gives me a '-420: interview UNTERMINATED ' error, thus stopping the program.

I have been through the intestines of the individual VI wrote in the pilot of the AGENA and cannot identify any errors in the coding of GPIB.  I have a cross reference of all the strings in the driver against what ENA programming manual.  The error-420 me references to 6.3.2 IEEE488.2, someone has access to it?

Any help on this would be greatly appreciated.

Fern Adam

IDEAL Industries, Inc.

After a lot of hard work, I gave in and called the district sales manager for my region (Jorge Noguera, San Diego) to schedule a help session.  Long story short, here's what is scheduled for:

"Calibration Data.vi measure" in a case that is selectable by the user for what standard to use solution (open, short, charge, through, isolation).  This VI needs to be changed.  After 'agena Write.vi' create another case structure before the agena "Wait For Complete.vi of operation."  Inside of the place of the case structure a flat sequence with a 'Wait (ms)' command - set the command queue to 5000.  In the structure of the case selector label refer to '3' (the same case that corresponds to the cal by standard) for the case with the wait command.  Wire the switch case for the control of Word unsigned for the case of the pre-existing structure selector case (which sets the standard cal).  Thus, when the cal standard value through, the structure cases wait is implemented after the agena write VI.

Tags: NI Software

Similar Questions

  • No pilot of the plane have been found.

    No pilot of the plane have been found. Make sure that the installation media contains the correct driver, and then click OK.

    Hi CraigKeller,

    Please see the thread with a similar problem and fix possible:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/no-device-drivers-were-found-when-trying-to/5b105b56-a0cc-441b-8559-ca5feac9105a

    I hope this helps!

  • Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

    Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

    Anyone where I can download this driver?

    See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

    There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

    They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

  • Cannot install windows 7 on a PC brand nine own because of "no pilot of the aircraft were found. Help, please?

    I recently bought a new PC online and then on arrival, I realized that it does not include an operating system. Then I went to buy windows 7 Home premium and trying to install, I get an error message that says:

    No pilot of the plane have been found. Make sure that the installation media contains the correct drivers, and then click OK.
    I'm a bit HE is competent, but I have no idea how to solve this problem, or even what it means. After research on the internet all day, I met many solutions that need actually be downloading stuff on the PC in question, but I have no way to do it without an operating system installed.
    I am desperate for any help, it would be much appreciated.
    Thank you.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

    If you have several internal storage devices connected to the computer, disconnect all except the disk target hard where you will install Windows 7.

  • How can I stop Firefox "Test pilot" of the race?

    How can I stop the Firefox running "test pilot"?

    You can disable or remove this extension via the subject: addons page.

    You have never installed a beta version of Firefox that has installed this extension?

  • I want to update my speed, the pilot and the registry on toshiba satellite 1110.It has a speed of 54 Mbps. Im running windows xp professional.

    I had downloaded a free system of driver detective check and it says I have to update my registry, drivers and speed, but the downfall is that I have to pay for it. I do not have the Professional operating drive of windows xp, but I have the KEY figures. In any case, my computer is slow on startup and shutdown. In addition, when Im searching the Web. So, how or what should I do to repair my computer, in order to have a healthy PC and still have a program to tell me when my PC needs work? Thank you...

    Driver Detective is a waste of space and time and provides no useful information. It can even registry optimizer tool. They all snake oil.

    If you do not have the Windows XP cd or a recovery cd then you have a hidden restore partition which should be accessed to create the recovery disks?

    If you don't have the disks then juggle your sys could make it is unusable and so no recoverable.

    Update the drivers is not required, unless this update of the driver gives greater functionality or solve a known problem. Driver updates are provided free of charge by officials of your hardware. Don't use winupdate for pilots

  • G7P83AV: Pilot giving the error code 43 since 10 display windows

    Yet another problem with 10 Windows on my machine. Found out today that the damn my display driver for that I can't use a projector or external monitor. According to the screenshots, I tried to update the driver, but it does not cause the error to stop. I even uninstalled the card and made "scan hardware changes" to reinstall, but nothing helped. I tried to go to Intel, but they refuse to allow me to download their driver because HP has a pilot-owner on this machine. Can anyone help?

    Hi @ClydeS,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 15 t-r000 CTO and problems with the Intel driver that gives you a Code 43 error. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

    Here is the correct driver for the laptop if you need. sp72370.exe

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Reboot the laptop twice to make sure that all updates are completed.

    Please let me know how it goes.

    Thank you.

  • pilots of the Patrick d srp - 275 para windows 7

    Hola, a greeting ante todo, para todos los foreros y administradores.

    Me've a alguien quien me can help a poder get los drivers well vayan has the the d of samsung srp-275 tikec Patrick, of windows 7, pues antes as tapeworm windows xp, con el servipac 3, iva, although pero ahora todo, me da problemas, stink prints y cuando prints, the're prints the generic y el sobrante of papel are muy extenso al end of print quisiera poder Find a respond, las hay of TR are that, Gracias

    Francisco,

    It is a forum in English, but in any case, here are the drivers you require: (Este are no foro in frances, pero todos aqui estan los moderators need pilots)
    Please post future questions in Spanish here:
    Carlos
  • Pilot of the trackpad for Macbook A1181 running Windows 10

    Hello

    I have an old MacBook A1181 crossing 10 Windows Boot Camp, and I have a few problems.

    So first of all, I installed 10 Windows via Boot Camp on OS X Snow Leopard. The installation went well. Can I download Boot Camp 5.1.5640 on Apple's site. It is installed without error. I restarted and now does not work the trackpad. The trackpad has worked before installing Boot Camp, but without gestures.

    Then I followed a few steps I found on google on how to make it work again. Basically, I installed the Apple keyboard as a USB input. Now the trackpad works again, but without gestures. I don't really like as long as it's on the zoom and scroll, but really annoing be able to right click.

    The webcam drivers do not work, but I found a driver online that works perfectly.

    I now that this Macbook is old, but I hope someone has a solution.

    Maybe I should also mention that I also tried to launch Ubuntu 15 on it. With Ubuntu I was both able to scroll through and do a right-click without even installing something other than the OS itself.

    I also tried to use a software called Tracpad ++, but it has not taken in charge for this old Macbook.

    Hope someone knows what to do or just something I can try.

    Flexiboy99dk wrote:

    I have an old MacBook A1181 crossing 10 Windows Boot Camp, and I have a few problems.

    It is probable, since there is no drivers certified for 7/8 year, material on W10.

    Then I followed a few steps I found on google on how to make it work again. Basically, I installed the Apple keyboard as a USB input. Now the trackpad works again, but without gestures. I don't really like as long as it's on the zoom and scroll, but really annoing be able to right click.

    Remove Trackpad ++, if you still have. What is the currently installed driver that supports your trackpad without the right click? You have a trackpad tab in Control Panel-> Boot Camp?

  • TECRA A2 PTA20E - pilot of the need for the WLan / Audio / graphics

    I have inherited an old TECRA A2 PTA20E - 02T01LFR 84063063P
    running on W7 Home Premium Eition

    The WIFI does not work!

    I need driver Audio multimedia
    "Networking".
    "Video".

    Help, please

    The Web of Toshiba site has downloadable drivers.

  • Satellite A300-15 b - no pilot of the plane have been found during installation

    Hello, I have a Toshiba Satelite A300-15 b and im trying to install Windows 7 on it. When installing, I get the error: "no device drivers were found.
    As I understand it does not recognize the hard drive to install windows on it. Any ideas? I tried to load the recovery cd to find the drivers but nothing.

    Thanks in advance.

    Edit: I found the storage drivers intel and I tried to install from a floppy disk. It does not work.

    Working ideas? I tried to boot from USB stick to install from there... same error asking drivers to cd/dvd...

  • pilot of the blue tooth for windows 7 for samsung galaxy s5

    Samsung told me that they do not provide the blue tooth for a Windows 7 driver for their cell phone Galaxy S5. They said that the manufacturer of the PC is responsible for this. I don't see any blue tooth of any kind device drivers provided by HP, so I think what the Samsung rep may not be correct. However, I write this post in the hopes that someone may know if there 1. is a driver and 2. where to find it. I have a HP Media Center m7050y (PX153AV) CTO Desktop PC running Windows 7 Ultimate. I have of course a tooth blue doggle in one of my USB ports and it works correctly. I know because I have other blue tooth running devices. Any help will be appreciated.

    Thank you for responding. I thought as well. I bought this computer a few months ago, second hand, so I thought that it did not come with Windows 7 originally. But that aside, I thought it would be Samsungso the responsibility of developing the driver. I noticed that my phone is not compatible with Windows 8.1 either. Such is life. Thanks again to confirm.

  • Pilot of the touchpad for Vista Satellite 1955-S805 footstool?

    Hi all

    Is there a touchpad (Alps, I think) driver that will work on this machine running Vista? I tried several but no luck for now.

    Thanks for the help.

    LOL: D you have installed Vista on this good old classic?
    Why?

    A lot of people switch to XP due to the better performance and you have installed Vista is very strange?  :|

    Anyway... This seems to be a series Toshiba us and if you need any driver, you should visit the Toshiba page we.
    But to be honest I doubt that you will find THE Vista drivers for this oldie!

    However, I wish you good luck

  • Pilots of the Virtual WiFI Miniport adapt to hp?

    Sorry, I don't know if this is the right section for this question, but I accidentally uninstalled one of my drivers: map Virtual WiFI Miniport because what he said was not start error (Code 10).

    I have Windows 7 64 bit
    Model: p6630f
    Product number: BM421AA #ABA
    HP Pavilion series p6000
    Pavilion p6630f PC
    Processor of Intel® Core™ i3-550

    802.11b/g/n wireless LAN

    Thank you!

    This is not an associated point HP and is a generic Microsoft driver included with the operating system installation. As this is a "Virtual" adapter, it is unlikely to have an impact on your internet connection.

    You can try to reload the driver by going to "Control Panel" > "Device Manager" > "Action" > "Scan for Hardware Changes". If this is not correct the problem, you can try Microsoft Fix it Solution Center

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP Elite Book 8460p: shortage of pilots after the Installation of 32-bit Windows 7 Home Premium HP EliteBook 8460p Base model No.

    Lack of drivers after installing Windows 7 Home Premium 32-bit

    Basic HP EliteBook notebook PC model 8460 p

    Model #: WX562AV

    [personal information]

    1. base device driver

    PCI Slot 2 (bus PCI 36, device 0, function 1)

    PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30

    PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C

    PCI\VEN_197B & DEV_2392 & CC_088000

    PCI\VEN_197B & DEV_2392 & CC_0880



    1 unknown Devices

    It is said that

    ACPI\HPQ0004

    * HPQ0004



    2 unknown Device

    USB\VID_138A & PID_003C & REV_0086

    USB\VID_138A & PID_003C

    Hello

    In the order displayed, you need:

    Card reader driver.

    HP 3D DriveGuard.

    Validity sensor driver.

    Kind regards

    DP - K

Maybe you are looking for

  • Get Rescue and Recovery

    Lenovo Toolbox suggests get Rescue and Recovery, but ThinkVantage System Update does not offer it. How do I get it? Thank you. Jim White

  • ListFindItem with StartingPosition out of reach: BUG

    Hello The index returned by ListFindItem is BAD when: StartingPosition = 0 (this is a wrong value: StartingPosition must be > = 1). The search value is equal to the LAST item inserted in the list: The following code example shows the bug in the TEST_

  • KB2991254

    I can't get the update, KB2991254. I'm getting the Code 800 b 0100 and have tried and tried but could not find a way to take care of that.

  • I lost the sound on my desktop PC I use windows vista, everything is properly connected

    I lost the sound on my PC at the beginning I had problems with the 9300GE Nividia G E Force which would not update & now I have a message that there is a problem with the ADS Instant HDTV PC1 driver?

  • Energy

    I have Windows Vista, but it does not load when I plug the charger. It is said, "plugged in, not charging." I tried everything, but it does not load. He started 21% of energy, so I loaded my laptop and after 20 minutes, it was still 21%. What's wrong