Pilot photosmart HP 5510
Hi guys, really need your help. Ive have lost my cd for my HP photosmart 5510 series. Ive been on the HP website and tried to download for windows 8 32-bit, but when it downloads n I click it, it says: "this computer can't run this application. Ive got a netbook Acer Aspire to v5.
I appreciate that very much.
Is that what you downloaded the driver package? http://ftp.HP.com/pub/softlib/software12/COL39102/MP-108875-3/PS5510_1315.exe
Tags: HP Printers
I put a static IP address for the Photosmart HP 5510. When I navigate to
, I get a pop-up dialog box requesting a user name and password.
Does anyone know how to reset it on the Photosmart HP 5510?
Thank you very much
Try the following steps below.
1. press the button on the control panel wireless
2. tap on settings
3. scroll down to the network by default, then press Ok
You should be able to access the security settings in the built-in Web server now. Let me know what you find?
I'm new here.
I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.
I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.
Could you help me please?
I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;
- Is the printer on a flat surface?
- How long has noisy for the printer?
- Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
- There are flashing lights, or the error messages on the printer?
- When was the last time that the cartridges have been changed?
- If you are a Virgin copy, when you hear the noise?
- If you open the printer do you see broken parts?
- When opening upward where the cartridges go, they move freely?
- The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
- Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
- You still get the noise after that?
I look forward to hear from you.
problem with my photosmart hp 5510 0x6100000b please help the ink tray won't
Hi, I know that this post has been done for a long time, but I just wanted to check if it is resolved? Do you have a warranty replacement printer?
How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?
The Tablet uses Android 3.2 and I downloaded HP ePrint home & Biz. Also had a pincode and used it.
The Tablet still shows "printer not found." I have to do something on the printer?
The printer is connected to a wireless router? What router? You've restarted the router?
You have enabled Web Services from the front of the printer?
my upgrade to windows 7, microsoft does not recognize my printer Photosmart HP 5510? I've tried everything
Try to download the latest drivers from the HP website:
I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.
You can also run the troubleshooting of the printer.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
I BOUGHTAN PHOTOSMART HP 5510 PRINTER BUT NOT THE INSTALLATION OF A CD BECAUSE MY NETBOOK HAS NO OPTICAL DRIVE. WHAT I NEED IS A GOOD LINK TO DOWNLOAD THE DRIVER, PLEASE HELP. I HAVE TRIED SEVERAL SITES WITHOUT SUCCESS.
I can not connect my Photosmart HP 5510 to the wireless network. It detects the wireless network, trying to connect, and then gives that the MAC address filtering message can be activated on your wireless router that can prevent your HP printer to connect. I don't know what to do, please help
Clarify your router brand and model can help provide you more specific advice.
You can contact your router service provider and check the following settings:
- If Mac filtering is enabled in the configuration of the wireless router, make sure to add the printer Mac address as the authorized device.
You can find the Mac address by printing a Network Setup Page.
(Menu wireless > wireless settings > print Network Configuration Page [Ok])
- If your router's wireless security defined as Wep.
Check it defined as Auto / Open authentication and authentication unrequited which is not supported by the latest HP printers.
- If Mac filtering is enabled in the configuration of the wireless router, make sure to add the printer Mac address as the authorized device.
I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.
The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...
The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!
I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.
So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.
You can change the identification of the unit of the printer, following embedded Web server:
- Access SAP from your browser by using the IP address of the printer.
- Enter the network tab.
- Enter the network.
- Enter Hello.
- Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
- Click apply to save the changes.
I am at my wits end with this and you are my only hope (what Star Wars quote).
I have a HP Photosmart 5510, I've had around 2011. I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.
However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.
I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).
I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.
Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:
"YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.
What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.
I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.
Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.
Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.
I recommend you try the following steps:
(1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."
2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.
3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.
4) remove the printer from your Mac. If you are not sure how, refer to the
guide for advice.
one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.
5) reinstall your printer: click here and install the driver that you are prompted.
Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
See you soon,.
I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!
Thank you for using the HP forum.
You can download and install the software COMPLETE features of HP printing for your operating system:
Please select your printer and win 10 OS before you download and install the FULL features software.
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
Hope that helps.
I can print (wireless) of my HP Photosmart 5510, but cannot scan. I've got version 3.14.3 HPLIP (recent, but not the most recent). I tried to install the latest version of HPLIP but cannot work out how to do (I'm quite new to Ubuntu). Can anyone help?
Please download the latest HPLIP for Photosmart 5510 from here:
The analysis is expected to be launched from the PC. and a printer (as shown in http://hplipopensource.com/hplip-web/models/photosmart/photosmart_5510_series.html#note3 )
Scan of the PC can be launched via an compatible with SANE like GIMP application. In other words, you can download a http://www.sane-project.org/sane-frontends.html for a GUI application to allow you to scan to PC.
Press Bravo if it helps.
All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.
If anyone has had this problem and can offer a solution? Thank you very much.
In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510. Be sure to check the events on the cartridge, as described in the document. If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.
I have problems with scanning. I "couldn't find any computor" but its fine printing message (wireless) etc. also asked to ensure that "The analysis of computor" is enabled in the software. I don't find it in the printer. Any ideas anyone?
Have you installed the HP software or last may only connected the printer?
Click on the Windows Logo and the S on your keyboard keys to launch the search screen.
Type HP or 5510 and open the software HP Photosmart 5510 search results, from there you can activate the Scan of the computer.
If you don't see such results follow this tool and download the latest version of the complete HP software:
Please let me know if this can help,
I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please
Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?
Welcome to the HP community @Blizzerd,
I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.
Here are the steps for you.
2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network
Test print and scan and let me know what happens! I hope that does the trick
Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!
Maybe you are looking for
I have a laptop model Satellite L300-1 has 3 less than 1 year for home use that is running Windows Vista. I have problems to connect. Usually, when I connect I just enter my password (i.e. no required user id) and it then takes me to the main area wh
My E drive shows 1.07 GB of 3.95 GB of free space. I moved a previous backup on drive C and and now wonder about the elements in the HP folder: updated the BIOS, BIOS, SYSTEMDIAGS, WEB FAST. Through discussions prev I see are usually important do not
Hello please help retorw my Cd / Dvd drive because it is corrupt and the error code is 39. Now, I can not download any software from a disc. What should I do?
original title: problem after the activation of the productI put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if
Ive seen the same question everywhere. but never an answer that works... Sohail patel showing the same answer that does not work...! response 1 that does nothing http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Up