PIN lost once I publish

Similar Questions

• BlackBerry Smartphones Can we consult-pin messages, once uncheck firewalls

  Messages pins of the customer have been blocked by the firewall of the BB. Once this option is disabled, is it possible to retrieve and view previously blocked PIN to pin messages, or do need to be returned?

  Thank you

  No, you can't view previously blocked messages.

• Why my picture is very blurry once I publish the project?

  I inserted two pictures in my project (8.01 Captivate) and they are the two fuzzy relly once I've published the project. Any format I save it, still blurry. I have change the pixels of the picture and reinserted and still nothing.  Any ideas on how to fix the problem?  frustrated...

  You did a lot of scaling, ways took my Calculator: your original image is 1700x2200px! And what is the resolution of your slides? Typical screen resolution is only 72-96 dpi. And a mobile browser has a typical width of 300-360px... The photo is taken up all that space, even in this case it was too much.

  But JPEG is a compression format with loss, what quality did you choose? In Photoshop, resize your photo to the resolution you want it have in Captivate and try again with a non-une as PNG24 lossy compression.

• I have reset my master password, but another doesn't, and Firefox crashes when I click on "device lost" once again. Name + pw OK.

  I have a new computer and you want to synchronize my favorites FF etc. Email and password are accepted. I didn't know my activation code. I checked the site and I clicked on lost my device to generate a new password, but this new activation code was scored an error. Now FF won't give me another activation code if I click on Lost again, but simply crashes. I tried to set up a new account with a different email address, but what is denied. I'll never be able to synchronize my account on my new computer?

  Hi jsfb,
  There is a new synchronization, go in "subject: accounts."
  Using an older version of sync? How to upgrade

  Try these steps, if you need assistance please let us know!

• OfficeJet Pro 476DW: pin lost to OficeJet Pro 476DW

  I recently moved and have a new service provider, I need to connect to the device but don't have do not or do not forget to set up a PIN.  I can't restore default settings because it is locked.

  To resolve this, connect the printer directly to the wireless router and it then you will restore the factory settings.

• Could not open a file once I published it.

  I have 64-bit edition of windows vista Home premium and I worked on creating a movie in windows movie maker.  I finished the film (or so I thought) and published it on a DVD.  Then I noticed that I needed to fix something on it.  When I tried to open the project backup on windows movie maker program he says he cannot be opened because it was not a valid window Movie Maker project.  I think the project is registered under his name and then. MSWMM after the name.  I have spent a lot of time on it and not want to not start over.  The DVD I made works but it takes a little change.  Any help would be greatly appreciated!

  Thank you

  DELALANDE

  That's what I was doing and he said cannot be opened because it was not a valid window Movie Maker project.  Is it saved or "archived" somewhere else than in movie maker?

  OUR

  ======================================
  No files are saved in fact ' in' Movie Maker... it accesses just
  the folders they are in. You will surely find the .mswmm project
  file in your videos folder but if not you can find with a search.

  When you find the .mswmm file... If a double left click will not
  Run it in Movie Maker, you can try the following...

  * Proceed at your own risk *.

  I have not tested the next "fix" because I've never had the
  error not valid, but it may be worth a try.

  If all data source files... photos, video clips, music files, etc...
  are still in their original location on your hard drive... open
  Movie Maker and remove the source of all files of
  the Collections pane.

  Now try opening the .mswmm file. If it always opens it's
  more than likely corrupt and re-creation of a project may be
  your only solution.

  You should know that without the original source of the files in their
  original locations... the .mswmm file is useless. The .mswmm file
  includes copies of the source files... it only records of the
  path to the original location of the source files.

  If you open a .mswmm file and see red Xs in the Collections pane
  This means that the source files have been moved, deleted, or edited.
  You will be able to, right-click the red Xs and access the new
  location to restore the path.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why image quality is lost when I publish my slide show on a DVD?

  After you have created a slide show big in movie maker, when I go to publish on DVD there is then a BIG loss in the quality of the image, makes me very sad :-(
  Any idea on how to keep the image resolution during the publication on DVD?

  After you have created a slide show big in movie maker, when I go to publish on DVD there is then a BIG loss in the quality of the image, makes me very sad :-(
  Any idea on how to keep the image resolution during the publication on DVD?

  ====================================
  If your (registered) publication WMV video files are not the
  resolution you expected... you may need to use a Custom
  Profile:

  Personally, I find the following .wmv profile to be
  useful when recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save target as... drop in the following Vista folder:
  C:\Program Movie Maker\Shared\Profiles
  (you will need to create the profiles folder, if it is not there)
  Profiles customized for Win XP, Movie Maker will work with
  Vista Movie Maker 6.

  The last section of the following article explains how
  Publish (save) by using a custom profile.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Disk space lost once disk utility has frozen.

  Hey guys, I have a little problem and I think that you guys can help me with it.

  Yesterday I tried to install windows 7 and while I was partitioning my HD, disk utility froze and I was forced to leave.

  When I opened the app again, I noticed 222 gb have disappeared! I tried Googling a solution but could not find anything that could help me.

  

  I honestly don't know what to do more, so if someone could help me I would really appreciate it.

  Please after the release of

  sudo TPG - vv - r see the/dev/disk0

• picture of monitor lost once booted

  I just reinstalled XP Home on a machine of my mother passed in law, in order to erase their personal data and re - purpose of the machine. In the manufacturing process the to the screen are more readable, I managed to get no picture on the screen after the initial splash screen Windows. I have to go to Safe Mode to fix this? How to do that if I can't see the screen? I don't remember see F2 or F8 options a reboot.

  Thank you.

  If nothing happens after you press ENTER, then the CD/DVD drive is not reading the disc.  This could be a disc or disc error.  At this point the BIOS is controlling the screen so no drivers will have been removed.  With the computer off, make sure all the wires for the CD/DVD drive are secure and also for the HARD drive.  Reload the BIOS of built-in security settings in order to eliminate any possible changes that could be the cause of the problem.  What you have said it's look like a hardware failure. If you think that my answers are useful please vote and mark as a possible answer. Thank you.

• Hyperlinks in a presentation does not not once published

  Hello-

  I want to put a hyperlink in powerpoint slide so that participants can click the link to launch an external swf. Is this possible? Right now, once I publish the presentation, the hyperlink is no longer active.

  Thank you!

  Katherine

  Hi Katherine,

  Please ensure that the text of the hyperlink have no shadow effect. Text of the hyperlink without effects works fine in Adobe Presenter 7.0.7

  Thank you

• Impossible to publish the project media with a calendar?

  I'm trying to publish a project as F4V (converted to mp4) as a demo of the software (voice). That's why I need to keep the timlines I put in place in the captivate project, but it seems that every time that I export the project and media, I lose the timelines.

  I would add that there is full-motion capture, which would need to be there so that are rather than be a certain period of time seems to be using a value default (3 seconds?) period of time.

  I hope that it is something in the settings that I can answer.

  Welcome to our community

  I'm lost when you say you must publish "with a calendar.

  I'll take a stab and wildly guess you mean that now descends once you publish? Note that there are several options when publishing as F4V.

  F4V video

  F4V (with fixed rate)

  I've seen other posts where audio incompatible is present and the recommendation was to use F4V with fixed rate. So maybe try that?

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• I lost the user's profile after the execution of an update of the Microsoft Vista

  After an update from microsoft on December 18, my user profile on the computer has been lost.

  It says there was an error loading the user's profile, and that any changes made to the computer now will be lost once the computer is offline.
  For me it of more my ruined A £499 of the cell value and not good for me.

  I'm not a computer genius and don't know what I'm doing.

  Can someone tell me please know what Microsofts update to vista did and how to fix it please.

  > Can someone please advise me as to what Microsoft s for vista update did and how to fix it please.

  I think THAT the guys at Microsoft would be able to say what did the Vista update
  To be honest I m running Vista updates too, but my computer and all my profiles are not affected

  However, what you could do is to put the OS up to this early time using Vista's system restore.
  Perhaps this will help you resolve the issue.

  If not, then maybe you can manually configure your user profile

• Value of cluster lost when you leave the structure of the case

  Hi all

  I'm having a problem with a particular VI I'm working. (FYI it's in Labview 8.0)

  The VI is set to run a current source, voltmeter and thermometer, then recording and graph the data in various ways that can be selected by the user.

  Everything seems to work fine except a particular graphic method. When I try to graph current compared to the tension, the current value is lost estates. In a case the current and voltage are combined to form a cluster, and then leave the case structure to be later appended to a table of cluster.

  However, the value of the cluster is lost when the chart is set for the voltage vs. Any other method and it works correctly.

  I can't understand why this is happening as it does not make much sense than other methods of work charts, but this one isn't when it is coded the same exact other than having the different variables.

  I have attached the VI with added indicators showing that the value of cluster is lost once he leaves the box structure. Any help would be appreciated.

  Thank you very much and I apologize for my extremely messy VI.

  -Nathan Cernetic

  You really need to boil this down to something we can run and reproduce the problem.

  Have you tried to break a few relevant connections and rewire? Something is possibly corrupt.

  Besides being a mess, your VI has quite a few glaring errors.

  Let's take a look at the structures at the top right:

  • 90% of the code is the same in all the structures of three cases, so all that needs to be inside the structure is the small part where you built the table 2D. All the rest is outside of the case.
  • The structure of the sequence has no useful function.
  • Why do you need to reverse the table with each iteration of the small loop FOR? Once before the loop would be sufficient. Right?
  • Why you use table built inside the small loop FOR, but no autoindex on the edge of the loop? All you ever get is an array containing exactly one element, no matter how the loop runs. Seems unnecessary! (see below for an alternative image).
  • You wouldn't even need to reverse if you want to use "built the table" instead of "insert into the table at position 0" in the central part.

  

  Other: You constantly hammer all nodes of your property. The only need that will be called when things change. Again, you have far too many cases. For example, in the structure of the case where you are having problems, the same nodes of property exist in all cases. A single instance of the property node belong outside the case and only the string inside each case constants. Whenever the code is the same in all cases a case structure, which code belongs to the outside!

• Windows 7 > deliver pinning of Excel 2007 files

  Hello

  I recently had problems with MS Excel 2007 (business) so I uninstalled manually using these instructions http://support.microsoft.com/kb/928218 it wouldn't work through Panel control etc.

  I managed to reinstall and the old problems have stopped working bar one of them; I have Excel pinned to the task (is it called that?) bar and then I usued to have all my important excel files pinned to one... now they aren't there AND it does not show the recent docs either!

  What happens wrong here please... it's very frustrating especially since I spent 2 hours to uninstall manually and had problems before!

  Your help would be appreciated.

  Mischa

  We can probably get this resolved by resetting jump lists.  This will reset all to be empty, but afterwards, you should be able to pin probably once again.  Here's how:

  1 - Copy this entire following line:

  %AppData%\Microsoft\Windows\Recent\AutomaticDestinations

  2 - Click Start, and then paste it into the search box and press ENTER.

  3. delete all files in this folder.  As a practice, just send in your bin so that you can restore if you need to.

  4. try pinning on a new element.

  Shawn B Keene | Microsoft contributor community

• Problem with MAC pinning and new VLAN

  [Cross Announces nexus 1000V and forums of the UCS]

  Hi all, I have a working of the UCS 1.4 configuration (3i) and the Nexus 1000V 1.4 and according to best practices guide uses "channel-group auto on mac - pinning mode" on the uplink of Nexus. I have a problem when you add a new VLAN in this environment, and it is a reproducible problem in two different facilities.

  I pass by the VLAN usual creation process on the Nexus, the network upstream and within the UCS himself. I create new port vethernet profile and set it as an access port in the new VIRTUAL LAN. However when I join a VM (existing or new) to this new port vethernet profile in vCentre virtual machine cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto on mac - pinning mode', the virtual machine will start instantly talk to the outside world and the new VIRTUAL LAN is running. Can I turn MAC pinning back once again, and everything continues to work.

  So the question is, is this normal or is there a problem? MAC the Θtiquetage has a brief interruption of the uplink, so is not a viable long-term customer solution when they want to add new VLAN. Is it possible to add new VLANS in this scenario without any unavailability of the network, but brief?

  Thank you

  Close the loop on this.  You tap the CSCto00715bug.

  Symptom: New MAC address is not learn on vem in the l2 table even though the mac address table is not overflow yet. vemcmd show l2-emergency-aging-stats | grep "Number of entries that could not be inserted:" will show extreme large number. Conditions: Nexus1000v VEM running on SV1.4 release. There are two CPU cores on the host. This issue may happen at race condition. Workaround: Reboot the ESX/ESXi host. 

  This problem is corrected in the 1. 4A release.

  Kind regards

  Robert