Ping works but the browser unable to access internet etc.
I ran msert.exe and windows-kb890830 - v4.0.exe in safe mode, no virus no indicated, but when I run them in normal mode both suspend the computer while checking wmplayer.exe.
Hello
If I undestand you well, you can run this command ping: ping www.yahoo.com, no problem, but when you're using any browser, you cannot access the web page www.yahoo.com, can you?
First you can try - full reset TCP and Winsock by this command line command - click on Start - run and write CMD , click OK. Then write this command:
netsh winsock reset
netsh int ip reset log.txt
LC
Tags: Windows
Similar Questions
-
I'm trying to access a web application (webmin) and I get the following error message:
This module requires java to work, but your browser does not support java
It was working before. Chrome works fine, but I prefer firefox. One of my clients is having the same problem but others using firefox isn't the problem.
I understand that you are under Linux.
I had this same problem and fixed it by adding the package icedtea6-plugin on Ubuntu. IcedTea6-plugin is a plugin for web browser to run Java applets.
-
Updated, runs in background but the browser will not open
Firefox automatically updated today, and I restarted the browser. Or at least tried to. the process runs in the background, but the browser itself will not open at all. I am running Windows 7, and it seems, in the bar of windows, as if its going to open, but it's fading. When I went to uninstall it said that it was still running. Stopped the process, uninstalled and reinstalled, but the same problem. Cannot use troubleshooting tasks because I can't in the browser at all!
Is currently working with a secondary browser, which is fine, but I really want to back Firefox!
cerulean1 wrote:
Can't use any of the troubleshooting tasks because I can't get into the browser at all!
Firefox does not start safe mode?
- Click round Windows logo in the taskbar to bring up the Start Menu.
- In the search box, type firefox.exe - safe-mode and press ENTER.
- If small Firefox Safe Mode window opens, click the start Safe Mode button.
- For more details, see the problems to troubleshoot Firefox in Safe Mode
If Firefox does not start safe mode, start the Profile Manager? If so, create a new profile and try to start Firefox in this profile.
-
Clicks of the mouse will not work on the browser - suggestions?
Following an update of Firefox last year, I can't get the mouse clicks to work on the browser. Is not serious if he left or right buttons. Links and radio buttons get highlighted when you move the mouse over the links or buttons, but they do not work when you click on it. They work on other browsers (Explorer and Chrome) but is no longer on Firefox. I use it on a Sony Vaio laptop running Windows 7
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
webcam works but the software cannot start the capture device
Original title: webcam problems
purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you
Hi reefwatcher,
- Did you the latest changes on the computer?
- You are able to use the webcam on other applications?
- You receive an error message?
Method 1
To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2
If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.
http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm
http://www.ikitmovie.com/free-trial-stop-motion-software.php
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Method 3
If the previous step fails, then you will need to contact the software retailer for assistance.
-
How to do a system restore with windows 8. my mouse is not working but the keyboard works
How to do a system restore with windows 8. my mouse does not work but the keyboard works.
I've updated some drivers and now my mouse does not work
Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.
You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.
Jim
-
Customer reviews received the second day in a row.
And you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome. I got the signature part via mobile phone to work but the submit button not not fire and typing method did not work at all. Suppose what echosign knows the percentage of people who are currently working off the coast of their mobile phones.
WTF?
Aaron, no thanks to Adobe (and a big thank you using Google Apps,) I finally could solve this problem. The way the document authenticates in the back-end is through Google + Apps Admin profile. Once I entered in the Console administration, compatible Google + for the created domain a + profile for the admin of the field, the auto shape filled the signature form after that I have authorized access to authentication on the shortcut menu. Not sure if your situation is in Google Apps, but even if not, I'd be willing to bet that the problem on your side is the account that is used for authentication when you open your form. I hope this helps!
-
I just installed an airport extreme router and WiFi works, but the status light still flashes.
Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.
for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...
Without our crystal ball, we do not know what is the issue.
-
Airport Extreme works but the State of the led is off
Airport Extreme works, but the State of the led is off, it is brand new and I can set up this last but the led stays off, showing no decided (green color or ambar)
Could someone help with this?
Thanks in advance.
Hardware failure - defective leads. Take that back for a new one, as big a PITA, you should.
-
Satellite A300 - system still works, but the screen is blank
Hello
I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.
I tried to remove the battery, and fn + F5 but the screen still won't turn on.
Any help or advice would be appreciated.
Rob.
Hello
It happened because of the updated BIOS, or during the common software update?
In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
Then reconnect the two parts and check to see if you could power the laptop properly!Check it out!
-
On Qosmio F30 TV tuner works but the picture is bad
I bought a Toshiba Qosmio F30-140. It's great in everything except for a TV tuner. It works but the picture is too bad, although the sound is good.
I've moved several times but without changing the antenna.
I appreciate your help.
Can I ask you what TV channels do you have received? Analog or digital?
If you want to receive the digital channels, then you should be 100% sure that digital signals are strong enough.
I read in trade journals that for most a weak signal has a bad influence on the quality of the image. -
Hello
I'm trying to control communication of the parallel port. But never a success.
I ran the sample VI: parallelportconnection.vi I got an error on Probe1. The error information are given below.
1073807246 error occurred at the VISA write to ParallelPortCommunication.vi
Possible reasons:
VISA: (Hex 0xBFFF0072) the resource is valid, but the VISA cannot currently access.
Please give me help.
Hello
To answer your question, please see the following articles:
Error 37 when using screw series compatibility or error-1073807246 VISAS screws
-
Original title: Windows XP runs very slow
Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.
Hi Bill,
Thanks for posting your question in the Microsoft Community.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. What is the error message that is accurate or complete?
2. have you made any recent hardware or exchange of software on your computer before the show?Please follow the links below and check the issue:
Maintenance tasks that improve performance:
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performanceSlow PC? Optimize your computer for optimal performance:
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyTWarning of Chkdsk.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Internet Explorer is slow? 5 things to try:
http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performanceWarning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.
-
Cannot use the internal mic. External microphone works but the sound is not very loud.
Original title: microphone
My microphone internal hp no longer works. If I plug an external microphone into the socket, it will work, but the sound is not very loud.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?Step 1: Try to run auto Locksmiths and check.
Reference: http://support.microsoft.com/gp/hardware_device_problemsStep 2: Set the default Microphone.
a. go to Start and click on Control Panel.
b. click on her, then a new window will open.
(c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
d now check if the Microphone is listed there and right-click on it and choose Activate.
e. Select the Microphone, and then click "set as default"Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/record-soundThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?
Hello
You did changes to the computer before the show?
Method 1: Check the mouse on another computer and see if the clicks.
Method 2: See the following article:
Troubleshoot the incidents of the response to the mouse or wireless keyboard:
Maybe you are looking for
-
How can I get my restriction for 6s iphone code
I have an iphone 6s im trying to rest the phone, so I can give my daughter, and she asks. A password where it do? I never put a foot ive never even supported my phone to the computer... Help, please!
-
HP g7: update of motherboard on the g7-1300 series for a g7-2000 series
Hello New to the forum, search on this but has not found the answer I was looking for. I have a g7-1300, series updated since B960 cpu to an i5 - 2410 m. Now, instead of buying a new laptop, I can get a motherboard the g7-2000 used for a small price
-
Satellite L50D-B-11 t does not restart in stand by
HelloI left my laptop on stand - by, it closed because of low battery, now it is stuck in stand by with black screen. I tried to force the restart, but nothing that he does not want to restart.Any help please?Thank youAlessandro
-
Brou - Er and debt offentligt forum, post private information såsom E-mail telefonnumre eller aldrig sa! Ideer:http://www.komogvind.dk/spil/pokersquare/ Programmer, the har med issues Fejlmeddelelser From Oktober har Lee din computer aendringer Hvad
-
When I press the END/PRTSC for print screen button, nothing happens.
original title: END/PRTSC Key When I press the END/PRTSC for print screen button, nothing happens. How can I print screen on my new laptop computer?