Pinnacle 12 Ultimate don't recognize film created by Camileo H20

Similar Questions

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Studio Pinnacle 14 ultimate, inport won't work

  Studio Pinnacle 14 ultimate, inport won't work, keeps trying to reload, edit and burn works very well, recharged several hours looking oss compatibility. Program opens in edit, when I go to inport it says reload and if it breaks down.

  Hello

  1. what operating system is installed on your computer?

  2. you receive an error code or message?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you to contact Pinnacle Studio Ultimate Support to obtain assistance from the link below:

  Pinnacle Studio Ultimate Support:

  http://www.pinnaclesys.com/publicSite/us/products/consumer+products/home+video/Studio+family/Studio+ultimate+14+support/contact/contact+support/contact+support+for+Studio+ultimate+14.htm

  For reference, follow the link below:

  http://www.pinnaclesys.com/publicSite/us/products/consumer+products/home+video/Studio+family/Pinnacle+Studio+ultimate+version+14+trial?code=studio14trial

   

  I hope this helps.

• CD/DVD drive is ejected disks after about 4 minutes. Often don't recognize the presence of the disk.

  Unit acted almost since. Don't recognize some discs, acknowledges some, even new program disks. When I can get it to play a DVD, it will appear yits in 4-5 minutes.

  Hello billyrhelms:

  Welcome to HP forum. Well, I see you found piou HP CD/DVD drive. This is a normal behavior how wonderful. CD and DVD have codes unfortunately HP Touchsmart will not open disks. You must use the Mexwell of HP brand discs or diskettes. Now for movies you have to pay for this updatehttp://www.cyberlink.com/prog/update/v2/update.jsp?fileTypeId=1&PRODUCTNAME=TouchSmart&PRODUCTVERSION=3.2_MediaSmart_4.0_DVD&VERSIONTYPE=BD+OEM+2ch&CHANNEL=OEM&LANGUAGE=ENU&OSREGION=0xf4&SYSTEMLOCALE=0x0409&BU=CLT&MAJORVER=3&MINORVER=2_MediaSmart_4&BUILDNO=4.0.4215&VENDORNAME=625&SR=HTS091023-02&DEVICE=DVD_Pre&PATTERNID=186873&BB_ID=58908&HWID=None&Model=None&APREGID=9649aabba4fa4bc2508c841e4b64e17a&UUID=None&affiliate=625_732_572_HTS091023-02_58908_186873_1-1_None_9649aabba4fa4bc2508c841e4b64e17a_None_0&utm_campaign=BB_&utm_source=BB_TouchSmart_625_&utm_medium=BB_TouchSmart_58908_Patch_Enhance_HTS091023-02_186873__ Not cheap very expesive $84.00 . If yoi is problems with the software disk. Insert the disc and then close this useless tiny window witch I find this very annoying.  Left click on (Edrive select properties and choose witch Windows to open the disc in.) The computer ejects disc not compatible and softawre

  It is one of the reasons why people are turning to Apple computers or other computers of the brand.  Please read forum. This is not the first time that this issue has been published. Please click on Bravo, if I answered your question. Thank you frrw.

• ESXi 5.0 servers don't recognize that same NFS share to the same data store

  I have a setup of vSphere 5.0 running VMware Workstation 8.  I have two ESXi servers that are accumulating the same NFS share (with the same IP address and the same directory path), but for some reason, they don't recognize it as the same data store.  I deleted and added to the data store again and checked that I am getting the same way on both nodes.  However, vSphere don't let me use the same name when I ride sharing NFS as a data store on the second node. vSphere changes the name of "NFSdatastore" to "NFSdatastore (1)" and will not let me change, say that the name already exists.

  The NFS file server is a VM of 2.99 OpenFiler, which IP 192.168.0.100 (and is in DNS as "openfiler1").  The path is "/ mnt/vsphere/vcs/datastore.

  The NFS mount works great as a data store on the two servers ESXi, except for the fact that vSphere sees two data stores.  I have a Red Hat VM running on each of them, and when I browse the data of each ESXi Server store, I can definitely see two configs VM, as well as a few ISO images that I put on the NFS share.  However, I can't vMotion as he complains about not being able to access the configuration file and the file virtual disk (vmdk) of the other node.

  On the OpenFiler, the directory/mnt/vsphere/vcs/datastore is the property of "ofguest" in the "ofguest" group, and the permissions are "drwxrwsrwx +".  All files under the directory are also held by "ofguest" in the group "ofguest".  Vmx files have permissions "rwxr-xr-x + ', and the vmdk files have permissions ' rw +-

  I did a lot of Google search, read best practices, etc.  Any help is appreciated.

  UPDATE: he Figured out - leakage / on one of the paths of NFS mounting.  DOH!

  Maybe this can help you:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005930

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

• Don't vSphere replication create control points which can be selected during the failover?

  Don't vSphere replication create control points which can be selected during the failover?  Or is the latest version of replication, the only option to failover?

  Thank you

  -MattG

  No, this isn't

  You CAN do this with EMC RecoverPoint (although not on a per VM level).

• Camileo H20: film becomes 4:3 instead of 16:9 report

  Recently, I bougth camcorder Camileo H20.

  I have a problem: when I transfer data, which were recorded in FHD, to a computer - the film becomes with imaging instead of 16:9 4:3 ratio.
  Somethihg is the problem with my camcorder?

  I put the camera back in the shop of the seller?

  Please, help me to solve this problem. Thank you.

  Hello

  I found the interesting detail manual.
  You can get the 16:9 ratio if you would connect the camcorder to an output high definition HDMI port using an HDMI cable.
  But you will get 4:3 ratio if you connect the camera to LCD cameras AV output port.
  Of course, this is relevant to connect the camcorder to a TV.

  If you transfer the files on the computer then I would recommend check the settings in the tight ArcSoft media software that came with your laptop.

• Windows 7 Ultimate does not recognize the Tungsten E2

  After that I've upgraded to Windows 7 Ultimate, Windows does not recognize my Tunsten E2 cable into the USB port.  I went to Device Manager to search for a triangle in order to use Aceeca.  However, there is no triangle.

  I tried using a USB key into the USB port and it worked perfectly.  However, when I tried my cable of tungsten, it's as if nothing happened in the USB port.  No recognition by Windows at all.

  Any viable solution would be much appreciated.

  Thank you.

  Hi WyreNut,

  FYI: I got it working.  However, there are a few things that had to be done.

  1. clean unlock it.

  2. go to regedit and make sure that all records of palm have disappeared.

  3. after cleaning regedit, I cleaned the registry again.

  4. disconnected from the USB port.

  5. restarted my computer.

  6. USB connection back into the port.

  7. follow the signs to Aceeca.

  8. everything works.

  Have a great week.

• Pavilion p6724y: 10 windows don't recognize hard drive

  After the upgrade to windows 10, my computer no longer recognizes my optical disk drive.  It appears in Device Manager, itunes will not import from a music cd, it just seems no longer exist.  I tried to browse the forums and implementation of various suggestions, but nothing works.  Finally, I called microsoft.  The technitian was told that HP has not yet been tested drivers for my particular model, but that if I called them, they would probably have drivers available.  I called HP and they said also, they thought it was a driver problem, and that they could access my computer remotely to install said drivers, but that my warranty had run out, so it would cost me $99.99 (or $199.99 for unlimited technical support for next year).  In other words, they want to charge me a hundred dollars for updating the drivers, I need so that my hard drive with Windows 10.  Am I missing something or is this really the shakedown, it seems to be?

  Human2, welcome to the forum.

  There is no win 10 drivers available for your computer.  Given that it is more than 4 years, I don't think they will develop all.  I suggest running Windows Update to see if it solves your problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How can I set up my printer with the internet to avoid the impression in this tiny print and language I don't recognize?

  I used to be able to print very well and then something happened and I don't know how to correct it. Not only, it prints in very small font and lettering I do not recognize but also wants to print many pages, that I'm not. Thx for all help to correct.

  Hello

  · What is the number and model of the printer?

  · You want to print Web pages?

  · Were there changes before the show?

  1 if the font is small when you print from Web pages, and then try to increase the size of the text on the Web page, change the size of text larger or largest.

  a. in Internet Explorer, open the Web page from which to print.

  b. on the view menu, point to text size.

  c. click the biggest or largest to enlarge the size of text.

  d. print the Web page again.

  2. you can also run the troubleshooter and check if that helps: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Published the Zip contains the files that I don't recognize

  I currently have to import Zip files for our little Content Management System. This zip files automatically starts the *.swf in the Zip file. I don't have an LMS System. When I post a zip file, the contents of the zip include *.htm and *.swf, *.js. These play fine in our CMS. I have a few zip files that includes the following content *.htm, *.swf, *.js, in addition, they also have a breeze - manifest.xml and one BDMetadata.xml. When our learners play the *.swf file it crashes after the first slide. I don't know it block because these files are looking for a LMS system that I did not. I can't understand what options or settings must be changed when posted to stop creating these files. I tried to simply remove these in the file zip, but it still does not work. Please help me...
  
  Thank you

  Removing the results of files in the program still lock up?
  Be that as it may, the breeze one seems easy (and makes me suspect you didn't)
  Look too hard, unless maybe it has changed in Captivate 2):
  Publish > Preferences > uncheck 'include breeze metadata.

  For the second, BDMetadata, I don't know--maybe it is related to the same
  thing? Or maybe it's a result of the option "508 compliance" in the same "
  zone of preference?

  Check preferences to see if these help solve problems...
  Erik

  Turnerbk wrote:
  > I currently have to import Zip files for our little Content Management System. This zip
  > files automatically starts the *.swf in the Zip file. I don't have an LMS System.
  > When I post a zip file, the zip content includes a *.htm, *.swf and
  > *.js. These play fine in our CMS. I have a few zip files that includes the
  > suite content *.htm, *.swf, *.js, in addition they also have a
  > breeze - manifest.xml and one BDMetadata.xml. When our students play this *.swf
  > it file locks after the first slide. I don't know it block because these files are
  > looking for an LMS system that I did not. I can't understand what options are
  > or settings need to be changed when posted to stop the creation of these
  > files. I tried to simply remove these in the zip, but which remains
  > does not work. Please help me...
  >
  > Thank you,
  >

  --
  Erik Lord
  http://www.capemedia.NET
  Adobe Community Expert - Authorware
  http://www.Adobe.com/communities/experts/
  ------------------------------------------------------------------------
  http://www.awaretips.net - samples, tips, products, FAQ, and links.
  * Search A newsgroup archives'ware *.
  http://groups.Google.com/group/Macromedia.Authorware

• IMovie 10.1.1 don't update or create a new project/trailer

  I've recently updated to iMovie 10.1.1. Since then, iMovie will not create any new projects or trailers. Anyone know why?
  It also doesn't let me upgrade to 10.1.2!

  Since then, iMovie will not create any new projects or trailers. Anyone know why?

  What happens when you try? Error messages?

  It also doesn't let me upgrade to 10.1.2!

  iMove 10.1.2 requires OS X 10.11.2 or newer. What you have installed?

  And Spotlight must see installed iMovie.  Is installed in your Applications folder and called iMovie?

• I keep getting sent to websites weird I never asked for and don't recognize. Is it a Firefox problem or a Google problem, or a problem of gremlin? He recently got a lot worse. Sometimes I can't back out of it and I reboot everything.

  This happens sometimes when I'm on a website of my choice or Google. I use Google as my search engine. It's really strange to ask to go on a single page and finish on something out of left field. Today, for the first time I had to close Firefox and start all over again. Please do not hesitate to email with any questions. I don't know what else to say.
  Kathleen Devinbold text

  Kathleen, it sounds like a horse of Trojan or other malware. You should try to run a Malware Cleaner and whatever anti-virus software you have installed.

  Also check Firefox-> Add-ons-> Extensions and remove anything you didn't put there yourself! Good luck.

• We don't recognize your connection details

  Hello

  I try to sign in to Skype with "microsoft account.
  But he said: "us does not recognize your connection details.
  I even reinstalled windows xp, but no result.
  It's used to work!

  But this week, it doesn't work anymore, what has changed?

  Thank you.

  I solved it.

  The problem comes from the version 6.11 do not use it, it's buggy!

  Use the older version 6.9 of connection!

  6.11 does not work.

• My usb port don't recognize anything I plug into it and I'm new to computers

  I tried to update my gps that he did not recognize that there is that whatever it is even plugged into my laptop at all. Then I used my laptop wives and he worked.it is as if my usb ports weren't working. Please HELP, very ignorant for computers. JP.

  Hello

  1. What is the operating system installed on your computer?

  2. you get any error message?

  3. were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1

  Follow the steps from the link

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.