Pinout of the device from the PCI-6225 in differential Mode of I

Similar Questions

• Programmatically determine the PCI device ID

  Hello again all you lovers forum useful!

  I am writing an application for exit to and read entry from ARINC PCI card, specifically the ICAN-530 of GE Intelligent Platforms.  Now their LabVIEW drivers and the documentation is pretty good, but one of the things that I have a problem with is how to determine the ID of the Board of Directors.

  The documentation on this Board ID is marked "for PCI devices, this Council number must match the device ID assigned when the installation of the API and the corresponding device has been installed."  I'm sure that I have discovered this using MAX, but what I really want is to determine if the laptop running my application has this card special in it ARINC and if so what is its device ID, by any program without the user to select or install MAX, etc.

  I hope it's doable, but I failed to find the right screw looking through this forum and in the pallets of LabVIEW.  If someone could point me in the right direction (or definitely state that it can be done programmatically), I would be very grateful.  :-)

  Thanks in advance!

  -Joe

  Just in case where someone else finds this useful thread in the future, I got the following response from GE Intelligent Platforms (who I bought the card), that indicates there will be a relatively simple way to reach my goal by using the LabVIEW drivers.  I have not tried so I can't guarantee its effectiveness, but it sounds good.  :-)

  If the only GE avionics installed is the ICAN-530, he would have no problem invoking AR_Board_Init until you encounter a status of passage; However, if there are other cards installed AND the distribution of the CIS - x 30 - SW is installed on this host, there is a mechanism to check room types.

  The AR_Query_Device of VI VI provided in CIS - LV Version 4.10 (latest version and probably the one would have received you if purchased with the ICAN-530), can be used in the following sequence to check such allocation device number on your system without actually opening a session and during the initialization of the Council.

  (1) call AR_LoadDLL.vi with the set control system Type to be 'CIS - x 30'.

  (2) call AR_Query_Device.vi in a loop (BoardIDIn control incrementing from 0 to 15) until the indicator of Type of card is returned in 26 (type for ICAN-530) AND the errorOut.code '1 '.  The BoardIDOut indicator will be the Deviceid for the ICAN-530.  Council for the VI types are described in the online documentation and printed for CIS - LV live.

  (3) If you will be running your application, you can just go forward on the basis of the VI AR_LoadSlv and waive AR_Board_Init (as AR_Board_Init is just a combination of AR_LoadDLL and AR_LoadSlv).

  (4) If you plan on using it to work with any other type of Council other than a CIS - x 30 Board, you must call AR_UnloadDll.vi to remove the library API CIS - x 30 memory.

• Windows PCIe device driver problem. Windows hangs on the reception of the PCIe interface data.

  I am writing a the PCIe device driver. With the PCIe, I have a connected storage device. I assigned a buffer in memory using malloc() which I use to transmit data to and receive my material. In my hardware, I have a DMA which uses physical addresses for data transmission. The transmission of data to the storage device works fine, it's all data that I have in the buffer are correctly transmitted to the material, but as soon as I try to receive all data from my material in this memory buffer (in memory of the host), windows crashes! I tested it on Windows Vista and Windows 7, but both crashed on playback. I think that windows is not let PCIe write on his memory. If that is the question, can you suggest anything to fix this problem? Or if you think that there is nothing else that is causing this problem, please let me know.

  Any help is appreciated.

  You'd better post in MSDN forum here instead.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  MS - MVP - Elephant Boy computers - don't panic!

• E7440 - problem with the PCI standard PCI to PCI bridge device

  I'm having a problem that I've not seen before on the E7440. I am Windows 7 x 64 deployment and after the imaging system, I have a machine called a bridge of PCI to PCI standard PCI with a yellow exclamation point.

  Indicates the status of the device that "this device cannot find enough free resources that it can use." (Code 12). If you want to use this device, you will need to disable one of the other devices on this system. »

  The unit uses a standard driver from Microsoft and the HardwareID is PCI\VEN_1AE9 & DEV_0201 & CC_0604. I was not able to find an any other driver or even a seller that corresponds to the string of VEN_1AE9.

  

  Curiously, if I delete the device does not. I also installed the Dell management software and was download and install all updates and that didn't make a difference.

  Anyone else seen this problem?

  I wanted to just let know you that I discovered the solution.

  The drivers are provided by the Network_Application_V6DXH_WN_1.5.16.881_A06. EXE package otherwise known as Application when Dell Wireless 1601

  I expanded the content and packages the installation to drivers that we do not use the D5000 when a docking station.

  This is my channel of the installation: MUPSetup.exe - q d-l %windir%\Installer\Wilocity_WiGig_D5000_Drivers.log

  This supports the PCI Bridge card and rename it to some other features. I've included a screenshot of the legends of the device once the drivers are installed properly.

  

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  If the device is always ask for the ID of the previous owner, then it is has not been deleted.

• With a binding high-speed small (1.3 MB) and living in a multi storage House, is it a lot to win add a device from the airport to the BT router?

  We have a high link flow modest (1 to 3 Mbit/s) and a several-storey house.

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  No, because the speed of your Internet connection is controlled by your provider, BT, if you need a faster Internet connection, you will need to talk to BT one faster... and more expensive... plan connection.

• Options of DMA with the NI PXI for the PCI 3 rd-party with no DMA controller device

  Hello

  I need to extract data my device PCI 3 rd-party at 22 MB/s.  The fastest, that I was able to continue to use NI-VISA 5.4 in LabVIEW 2013 is 1.6 MB/s with the function move in 64.  There is no DMA controller on the 3rd party device.  I was hoping to use the DMA of the host controller and a VISA MEMACC object, but I fell on 3229I2RA knowledge base: How do NI PXI controllers support DMA (Direct Memory Access)?  The KB has that "our PXI controllers support only the PCI specification and therefore do not a DMA controller on the motherboard."  If there is no DMA controller on the PCI 3 rd-party device, is there no DMA option for my 3rd - party on NI PXI controllers device?

  Thanks for your time and your thoughts,

  Steve K

  Currently, there is no controller PCI DMA accessible by the user on computers NI PXI.

• Get "Windows could not obtain the list of devices from Windows Update, please try again later"

  Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

  Windows Update is set to "Download updates but let me choose whether to install them".
  Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
  Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
  Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
  Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
  Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
  A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
  Thank you.

  .. .the printer I'm trying to install is a HP DeskJet 6122.

  You should have clearly stated that in your first post.

  See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

  more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

  Once again, good luck.

• vSphere "There is no device for the PCI Passthrough on the host"

  Hey all,.

  I use a trial version of VMware vSphere 5.1 on a server Dell T - 410 Quad Core - w - 32 GB of RAM.  I'm not under vCenter.  I installed this after attending a class on VMware vSphere there and now I'm just using it because I need to study the materials of many moons.  I left 40 days on the assessment.

  I'm trying to add support for a PCIe card in VMware vSphere for a Linux CentOS client.  (Note that all customers react in the same way).

  When I click on the Client and then 'change settings' > I see the dialog window 'Properties of the Virtual Machine' and the Add button.

  When I click on ADD, I see the following:

  "PCI Device (not available)".

  By clicking on the PCI device in gray reveals that:

  This device cannot be added to this virtual Macine because:

  There is no device for the PCI Passthrough on the host

  ---------------------------------

  I have looked in a number of places but haven't seen any clear information about how to ADD a PCIe or PCI peripheral Passthough.

  Can you tell me messages of the Forum or Documentation for this operation?

  I run a vCenter evaluation copy to pull this off?  (And there are copies of assessment of vCenter even?)

  Thank you

  Tommy

  Select the host, and then you will see the configuration tab.   Advanced settings is at the bottom left.

  OK just see your message... good luck!

• 2000-2d19wm HP: I need drivers for the PCI device and SM Bus controller

  I have a Hp 2000-2d19wm and I have downgraded to win8 to win7. Now I am trying to install the drivers and I can't find it on the HP website. Please help me.

  Hello:

  You need this driver for smbus controller...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_118001_1

  You need this driver for the PCI Dev:

  Realtek card reader driver

  File name: sp64801.exe

• Control multiple devices using the PCI-8430/8

  Hello

  We have a few questions about the control of several equipment in series with the PCI-8430/8. I'm sorry if here is not the right place to post these questions.

  The goal is to control flow valve 6 magnetometers at the same time, each magnetometer has a RS 232 interface and baud rate of 300 to 72800 (in general, we use 9600).  Task includes the issue a few commands to config and continually read data of magnetometers in the defined format.

  Software platform: WINDOWS XP/32, C/C++

  (1) is it feasible with the PCI-8430/8? What is the highest baud rate, if all six magnetometers are running simultaneously?

  (2) are there similar to our task example codes? I found a C:.../National Instruments\NI-VISA\Examples\C\Serial\RdWrtSrl.c but I don't know if it's the right thing first (I have some experiences on programming via DAQmx DIO, but not with serial number).

  Thanks a lot for your time!

  Kunyan

  Hi eLions,

  (1) the baudrate on each channel, each channel can support max flow.

  (2) the USB-232/4 is only a single USB port that breaks in 4-port series.

• Satellite U840-113: pilot missing for the PCI Communications controller

  "* Toshiba Satellite U840-113 - PSU4SE: * Win7-Prof - 64-bit with MS-DVD original on off RAID, no RAID oder installed software RAID driver, internal SSD now like normal running, new installed SSD SSD completely new, all the drivers installed successfully - with the exception of the following device: in Device Manager, I find under the"other devices"the position?" Controller PCI-Communications (single) ". *

  Who can help me to locate / find the right driver for this "PCI Communications controller"?

  What ist this? Do I need this?
  The system seems to work perfectly; I disable this feature?

  Thanks a lot for the helpful answers!

  Hello

  This article from Toshiba may be useful:
  http://www.MyToshiba.com.au/support/items/FAQ/222

  The PCI of Simple Communications controller is part of Intel AMT Management Engine Interface and is related to the networking on your computer.

  You will need to install the driver Intel (r) AMT Management Engine Interface.

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• With the help of screws of Vision Acquisition with the PCIe-1429

  Greetings earthlings,

  Y at - it a tutorial/book white/site that can give me an introduction on the use of the Vision Acquisition IMAQdx screw to capture images using the PCIe-1429? I am brand new to this kind of thing and it is a little outside my area of expertise, and I don't know where to start. I don't even know the basics of a general approach for the implementation of the process.  Any suggestions would be most appreciated. I am aware that I need to set up a file from the camera via the MAX application.

  Thank you!

  Candice

  Hi Candice,.

  There are a number of references on our site to help you get started. For starters there is the Manual and Quick start guide.

  What device do you want to buy from? Depending on whether you have the camera, you can download the file from camera on our site. To learn more about the files of camera here, which includes links to where to find ready made camera files. Finally, there are a number of examples in the example LabVIEW and CVI finders that explain how to acquire images using IMAQdx. You can access these examples via

  "' ' ' 'Help' example Finder. '" In the pop-up window, access the material record of entry and exit"IMAQdx.