Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
It's a delicate issue... like some patches cannot stipulate pitchbend...
But to quickly test your pitchbend wheel actually works properly...
Download the free lunch monitor...
Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.
Tags: Professional Applications
Similar Questions
-
I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?
1. in what year is your Mac?
2. What is the size of your storage internal?
3. what version of Windows?
4 as a general rule 60-100 GB for W8 + / W10 is recommended. You can also create a minimum Windows (30-50 GB) and use an external drive D: for documents applications for portability.
-
Can someone give me some advice on databases?
Hi all
I've recently created my first database in phpmyadmin, so I'm new to the whole process. ID like to some how to apply within 60 days to data that are transferred to the table after this id of time as the data to be automatically deleted. Is it possible in phpmyadmin and is this possible without change or make changes to the code in Dreamweaver? Please see the image below to see my database in the table structure.
Thank you for all the advice!
Ness_quick wrote:
OK I did this and inserted a new data through my 'insert_donations.php' page which has downloaded new data and a date now appears in the column "dateCreated" in my table, all working as it should! I tried to change to yesterdays date via phpmyadmin, but it doesn't seem to like it so ive left and will wait to see if it removes it tomorrow. Fingers crossed!
You must change the "date" in the query below on the name of column - dateCreated (if that's what you named it) - and YOUR table is called "Gift" NOT "gifts".
mysqli_query ($con, "DELETE FROM WHERE date gifts< date_sub(now(),="" interval="" 1="">
Ness_quick wrote:
BUT the problem I have now is when I opened the "insert_donations.php" security login page (index.php) should load first, but now is not a reason any. It worked fine until I added this code earlier (see above)?
I'm guessing it's because you have not closed the browser so the "session" is always present.
-
Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module
Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.
-
As I said above, I'm new to the world of computing, and I'm currently enrolled in classes, well, my problem is that I got my frozen unconstitutional office. Could someone give me some advice on how to fix this error. Thank you very much for your company.
Hello
If the system is blocked, you may have to restart. If necessary, you can restart in Mode safe
by pressing repeatedly F8 as you boot/startup.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I forgot my apple ID and password, that's why I can't ativate my ativation icloud, but I the EMI and the serial number of my device and all documents in my camera. Please give me an advice. Thank you
-
can I play the guitar and midi keyboards at the same time?
IM using the 3 main stage, I would like to play guitar and midi keyboards at the same time. I know that I can have more than one keyboard will at the same time, but I can't understand how to play the guitar too. I use a core Alesis 1 plug the guitar and a Keith McMillen 12 Step midi controller, he reads both just fine alone, but they play together. How can I get there? In addition, Im using a MacBook Pro OS X El Capitan.
Thank you
Mike
You add a bunch of audio channels and affect the Core 1 Alesis entry?
-
I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help
Print a Network Setup page using the controls on the front panel of the printer. See your manual for details. Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.
What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice. You may need to search in the help for the printer on your computer system. You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.
Once you know what the IP address of the printer (and, preferably, how to change), then...
On your computer.
- Click Start > printers and faxes
- Right click on your printer icon, and then select Properties
- Click on the Ports tab
- Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
- Compare the IP address in the box "printer name or IP address.
- If the IP in the box is not the same as the one you have determined for the printer, make sure.
- OK your way out and you should be able to print.
Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again. Him 'why' is normally your wireless router automatically sets the IP address of the printer. If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime. There are two methods to deal with this.
One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.' This is a feature that the HP printer drivers have, but in my experience, it is not reliable. It works probably better if you change the contents of the box of the IP address of the printer "hostname." This is something that you should be able to find in the printer setup utility accessed through your web browser. It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.
Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address. If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same). For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1. The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else. You will find this bit of your router configuration utility. Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).
-
My MacBook Pro is not connect to my Time Capsule so it backs up. IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.
The problem started when I upgraded to Yosemite, sometimes back. I am running 10.10.5.
The MacBook Pro...
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click Add or remove from your drive
Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)
Click remove disk
Close the windows
Restart the MacBook Pro
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click select drive or Add or remove disks
Choose the Time Capsule drive (probably named 'Data') by highlighting
Click use the disk
Close the windows
Wait a while to see if a backup is performed
If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now
Report on your results. If the backup still does not work, we need the exact message that you see there.
-
When I upgraded to Firefox 9.0.1 I lost many of my bookmark icons. Now the icons are just empty boxes. How can I get back my icons? Thank you!
Try to recover with this extension:
- Favicon bookmark changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/
-
book catalog error #1010, u can give me some advice please
Hi, this is my .fla, some images of book file and catalogue xml with 6 pounds (2 for the political class, romance, and science)
testing123. Pondi.hr/Books/Catalog.zip
and you can download it to see and try.
his simple book subject list dynamically file Ext. xml as you can see on
http://testing123.Pondi.HR/books/index.html
problem: when you click on the category on the right button, sometimes nothing happens, you have to click several times until you get result (list of books according to the corresponding category) and after that everything goes well, as you see... when publish you in flash and make this category button by clicking on, you can see error th output that says :
TypeError: Error #1010: a term is undefined and has no properties.
function / < anonymous >)
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()PS: If anyone can give me some advice on this (img probbably charger difficulties) I would be so grateful and blessed
THIS CODE from the EAST (I'm a bit new to this so have mercy with your comments ):
Stop();
flash.net import. *;
import flash.events.EventDispatcher;
Import fl.containers.UILoader;
Import fl.containers.ScrollPane;
import flash.display.MovieClip;
import flash.display.Shape;
import flash.events.MouseEvent;
import flash.events.Event;var myScrollPane:ScrollPane = new ScrollPane();
var arrUILoaders:Array = new Array();
var fontStyleAlignL:TextFormat = new TextFormat();
var fontStyleAlignR:TextFormat = new TextFormat();STYLE OF FONT FOR ALL PRICES (ALIGN = LEFT)
fontStyleAlignL.size = 11;
fontStyleAlignL.color = 0xAAAAAA;
fontStyleAlignL.font = "Tahoma";FOR THE PRICE (ALIGN = RIGHT) FONT STYLE
fontStyleAlignR.size = 11;
fontStyleAlignR.color = 0xAAAAAA;
fontStyleAlignR.font = "Tahoma";
fontStyleAlignR.align = 'right ';politics_mc.addEventListener (MouseEvent.CLICK, workWantedCat);
romance_mc.addEventListener (MouseEvent.CLICK, workWantedCat);
science_mc.addEventListener (MouseEvent.CLICK, workWantedCat);function workWantedCat(event:MouseEvent):void {}
myScrollPane.refreshPane ();
var xPlacement:int = 10;
var yPlacement:int = 0;
var distance: int = 15;var wantedCat:String = "";
Switch (event.target.name) {}
case "politics_mc": wantedCat = "policy"; break;
case "romance_mc": wantedCat = "romance"; break;
case "science_mc": wantedCat = "Science"; break;
}var myXML:XML;
var url: URLRequest = new URLRequest ("catalog.xml");
var loader: URLLoader = new URLLoader (url);
loader.addEventListener (Event.COMPLETE, onLoadComplete);function onLoadComplete(event:Event):void {}
var rowShape:Sprite = new Sprite();
If {(loader.data)
myXML = XML (loader.data);
var books: XMLList = myXML.book;
}for (var i: uint = 0; i < Books.length (); i ++) {}
If (Books [i].category.toString () == wantedCat) {}
FORM FOR EACH LINE OF THE BOOK
rowShape.graphics.lineStyle (1, 0 x 333333);
rowShape.graphics.drawRoundRect (xPlacement, yPlacement, 820, 15, 15, 15);
SUPPORT FOR THE LEFT IMG THUMBNAIL
var newUILoader:UILoader = new UILoader();
arrUILoaders.push (newUILoader);
arrUILoaders [i] .source = .photo books [i];
arrUILoaders [i] .scaleContent = true;
arrUILoaders [i] .setSize (12,12);
arrUILoaders [i] .visible = true;
arrUILoaders [i] .x = xPlacement + 4;
arrUILoaders [i] there = yPlacement + 2;
arrUILoaders [i] .buttonMode = true;
arrUILoaders [i] .addEventListener (MouseEvent.MOUSE_OVER, ToolTip);
TEXT FIELD FOR THE TITLE OF THE BOOK
var titleField:TextField = new TextField();
titleField.text = books [i]. Title;
titleField.x = xPlacement + 20;
titleField.y = yPlacement-1;
titleField.selectable = true;
titleField.wordWrap = false;
titleField.setTextFormat (fontStyleAlignL);
titleField.width = 250;
titleField.height = 17;
TEXT FIELD FOR THE AUTHOR OF THE BOOK
var authorField:TextField = new TextField();
authorField.text = .author books [i];
authorField.x = xPlacement + 275;
authorField.y = yPlacement-1;
authorField.selectable = true;
authorField.wordWrap = false;
authorField.setTextFormat (fontStyleAlignL);
authorField.width = 150;
authorField.height = 17;
TEXT FIELD FOR THE BOOK EDITOR
var publisherField:TextField = new TextField();
publisherField.text = .publisher [i] books;
publisherField.x = xPlacement + 430;
publisherField.y = yPlacement-1;
publisherField.selectable = true;
publisherField.wordWrap = false;
publisherField.setTextFormat (fontStyleAlignL);
publisherField.width = 125;
publisherField.height = 17;
TEXT FIELD FOR THE YEAR OF THE BOOK
var yearField:TextField = new TextField();
yearField.text = books [i]. Year;
yearField.x = xPlacement + 560;
yearField.y = yPlacement-1;
yearField.selectable = true;
yearField.wordWrap = false;
yearField.setTextFormat (fontStyleAlignL);
yearField.width = 50;
yearField.height = 17;
TEXT FIELD FOR THE COMMENT BOOK
var commentField:TextField = new TextField();
commentField.text = books [i]. Comment;
commentField.x = xPlacement + 615;
commentField.y = yPlacement-1;
commentField.selectable = true;
commentField.wordWrap = false;
commentField.setTextFormat (fontStyleAlignL);
commentField.width = 150;
commentField.height = 17;
TEXT FIELD FOR THE PRICE OF THE BOOK
var priceField:TextField = new TextField();
priceField.text = [i] books list;
priceField.x = xPlacement + 770;
priceField.y = yPlacement-1;
priceField.selectable = true;
priceField.wordWrap = false;
priceField.setTextFormat (fontStyleAlignR);
priceField.width = 50;
priceField.height = 17;
ADD TEXT FIELD CHILDS TO LINE SHAPE
rowShape.addChild (arrUILoaders [i]);
rowShape.addChild (titleField);
rowShape.addChild (authorField);
rowShape.addChild (publisherField);
rowShape.addChild (yearField);
rowShape.addChild (commentField);
rowShape.addChild (priceField);
SETTING LINES AND FIELDS TXT PLACEMENT
yPlacement = yPlacement + distance;
}
}
ROWSHAPE SETTING IN SCROLLPANE
myScrollPane.source = rowShape;
myScrollPane.setSize (865, 500);
myScrollPane.move (30: 20);
addChild (myScrollPane);
}
}FUNCTION OF THE TOOLTIP FOR IMG THUMBNAIL MOUSE_OVER
var bookImg_tt:UILoader = new UILoader();
function tooltip(event:MouseEvent):void {}
var imgPath:String = event.currentTarget.source;
bookImg_tt.enabled = true;
bookImg_tt.source = imgPath;
bookImg_tt.scaleContent = true;
bookImg_tt.startDrag ();
bookImg_tt.x = mouseX;
bookImg_tt.y = mouseY;
bookImg_tt.visible = true;
event.currentTarget.addEventListener (MouseEvent.MOUSE_OUT, noTooltip);
addChild (bookImg_tt);
}
WITHDRAWAL OF TOOLTIP FOR IMG THUMBNAIL MOUSE_OUT FUNCTION
function noTooltip(event:MouseEvent):void {}
bookImg_tt.enabled = false;
bookImg_tt.source = "";
bookImg_tt.visible = false;
removeChild (bookImg_tt);
}TNX A LOT
The problem occurs when you move a series of books in the list and is located mainly between those lines...
for (var i: uint = 0; i
arrUILoaders.push (newUILoader);
arrUILoaders [i] .source = .photo books [i];
If you select the category romance everything first, the value of i is already 4 via the closure, when it is finally found, but because you push() shippers in the table, there is no arrUILoader [4]... There is only arrUILoader [0] as it was the first to be pressed. If you change the line in bold to be...
arrUILoaders [i] = newUILoader;
You will have the UILoader your search code in all lines that target arrUILoaders [i] that follow. Otherwise, using push(), you must target the last UILoader pushed, not one designated by I, which would mean that your table would grow whenever you choose a new category.
-
I quite often use the Win 7 defrager. What don't get me, is why he continues to make more than one pass if the last 'statement' is defragmented at 100%? Also, if after a "run" of the defrager, I hit defragmentation agn would continue to operate several forward passes agn she says... 100% defragmented. Can someone clarify what happens during each pass and what is the 100% average for each of the 3 sessions in the context of the pass as part of the complete kit and shebang vs? I must be missing something here. TNX in advance. Neil
Hello
I would like to inform you that the Disk Defragmenter is a tool that rearranges the data on your hard drive and brings together fragmented files so that your computer can run more efficiently. We must keep in mind that Disk Defragmenter uses disk access low priority and processor so that it is not influence your current running programs. This automatically translates a slower process.
Disk defragmentation can take a long time if you run it for the first time and also depend on the space of hard disk and available data. If may take up to 15 to 16 hours, depending on the data and the bad clusters on the hard drive.
What is disk defragmentation?
http://Windows.Microsoft.com/en-us/Windows7/what-is-disk-defragmentation
http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk
For more information, please visit the link: http://blogs.msdn.com/b/e7/archive/2009/01/25/disk-defragmentation-background-and-engineering-the-windows-7-improvements.aspx
I hope this helps!
-
The program sends me to the "Microsoft Core XML Services (MSXML) 6.0". It seems that this is not an update of Windows 7. Can someone help?
MSXML4.dll is a Windows DLL file and belongs to the Microsoft MSXML (version 4.0 SP2) of Microsoft software, you can download the update on the link http://support.microsoft.com/kb/973688/en
-
I use Firefox to load the photos in my Picasa Albums. Two days when I tried to make a new album, Firefox repeatedly block Picassa. I checked in the Options box and my Picassa site was included to allow, but it will not. How can I fix this problem so I can use Picassa?
Thank you
DavidThe best solution is just to add... docs.google.com to allowed in compatibility mode.
-
I have a dozen left about 300 songs. I'd appreciate any help at all. Thank you.
Sorry... I thought it was worth the try.
I'm guessing that you did a search for the
files and also checked your Recycle Bin?
Maybe you are looking for
-
Photosmart C309 abruptly stopped, printing black ink (any solution?)
My HP Photosmart Premium C309 suddenly stopped printing black. Everyone recognizes this problem and has a solution? I tried to unplug the power plug, power switch, cleaning of the printheads several times (manually), cartridge to give a little air, c
-
Vista 2010 internet security?
I get this pop up to install ' vista internet security 2010» I scanned my computer using live onecare and the malwarebytes and they come clean. When I go into control panel > Security > firewall is to show the firewall is granted to offshore and wont
-
Keyboard and mouse not working not not after resetting Windows 10
I have a Dell Inspiron 530 on win 7 now upgraded to win10 1 to August 15. All good until a few days ago, when my wireless keyboard and mouse began paying up, keys not giving the correct characters or symbols. I found a site that offers to win 10, tha
-
Hello I tried to use the HDMI in the codec (main cam in) to connect to a DVD player I have the video image of the DVD but no sound. I have read the Administrator's guide and can not finde any thing about the path of the Audio in the codec. One knows
-
You have installed Adobe Bridge 6.2? All Adobe Creative cloud subscriptions are Bridge (even the subscription of photograph $ 9.99 / month). There is a fabulous new Adobe team working on the bridge, making a total rewrite of the application code. We