PIX 501 and VPN Linksys router (WRV200)

I inherited a work where we have a Cisco PIX 501 firewall to a single site and Linksys WRV200 Router VPN on two other

sites. Asked me to connect these routers Linksys firewall PIX via the VPN.

According to me, the Linksys vpn routers can only connect via IPSec VPN, I'm looking for help on the configuration of the PIX 501 for the linksys to connect with the following, if possible.

Key exchange method: Auto (IKE)

Encryption: Auto, 3DES, AES128, AES192, AES256

Authentication: MD5

Pre Shared Key: xxx

PFS: Enabled

Life ISAKMP key: 28800

Life of key IPSec: 3600

The pix, I installed MDP and I tried to use the VPN wizard without result.

I chose the following settings when you make the VPN Wizard:

Type of VPN: remote VPN access

Interface: outside

Type of Client VPN device used: Cisco VPN Client

(can choose customer of Cisco VPN 3000, MS Windows Client by using the client MS Windows using L2TP, PPTP)

VPN clients group

Name of Group: RabyEstates

Pre Shared Key: rabytest

Scope of the Client authentication: disabled

Address pool

Name of the cluster: VPN - LAN

Starter course: 192.168.2.200

End of row: 192.168.2.250

Domain DNS/WINS/by default: no

IKE policy

Encryption: 3DES

Authentication: MD5

Diffie-Hellman group: Group 2 (1024 bits)

Transform set

Encryption: 3DES

Authentication: MD5

I have attached the log of the VPN Linksys router VPN.

This is the first time that I have ever worked with PIX so I'm still trying to figure the thing to, but I'm confident with the CCNA level network.

Thanks for your help!

Hello

Everything looks fine for me, try to have a computer in every network and ping between them. Check the newspapers/debug and fix them.

Let me know.

See you soon,.

Daniel

Tags: Cisco Security

Similar Questions

  • Problems with PIX 501 and Server MS Cert

    Hi all

    I have two problems with my PIX 501:

    1. registration works well. The pix has a certificate and use it with SSL and VPN connections. But after a refill, the pix certificate is lost and it has regenerated again self-signed certificate!

    Yes, I wrote mem and ca records all!

    2. at the request of ca CRL , I get the following debugging:

    Crypto CA thread wakes!

    CRYPTO_PKI: Cannot be named County ava

    CRYPTO_PKI: transaction GetCRL completed

    Crypto CA thread sleeps!

    CI thread wakes!

    And the CRL is empty.

    Does anyone have any idea?

    Bert Koelewijn

    Not sure about 1, but 2 is usually caused by the COP (Point of Distribution of CRL, basically the situation where the PIX can download the Revocation list from) listed in cert CA is in a format the PIX does not, generally an LDAP URL.

    Check the following prayer:

    Open the administration tool of CA (Certification Authority) then

    (1) right click on the name of CA and choose 'properties '.

    2) click on the tab "Policy Module".

    3) click on the button "configure."

    4) click on the tab "X.509 extensions".

    > From there, it can display the list of the "CRL Distribution Points".

    Turn off everything that isn't HTTP.

    You need to reinstall the CERT in the PIX, I think, but then it should be able to download the CRL through HTTP instead of LDAP.

  • PIX 501 and THE, 3DES, AES

    For a version newly produced PIX 501,

    (1) are DES, 3DES and AES activation keys all pre-installed?

    (2) how I can find on which of them is pre-installed on my PIX 501?

    (3) when I create a server VPN (on the PIX 501), I see that all three OF THEM, 3DES and AES are available in the drop-down list of the PDM configuration screen. Does that mean my PIX 501 have all three of them (FROM THE, 3DES and AES)? -If the answer is no, assume that only is preinstalled on PIX 501, then why/how can appear in the drop-down list the 3DES and AES?

    Thank you for helping.

    Scott

    Should be integrated already. depends on the way the news is your PIX 501.

    To be sure to log in to the console and type:

    See the version

    See the example output version:

    See the pixfirewall version (config) #.

    Cisco PIX Firewall Version 6.2 (3)

    Cisco PIX Device Manager Version 2.0 (1)

    Updated Thursday April 17 02 21:18 by Manu

    pixdoc515 up to 9 days 3 hours

    Material: PIX - 515, 64 MB RAM, Pentium 200 MHz processor

    I28F640J5 @ 0 x 300 Flash, 16 MB

    BIOS Flash AT29C257 @ 0xfffd8000, 32 KB

    0: ethernet0: the address is 0050.54ff.3772, irq 10

    1: ethernet1: the address is 0050.54ff.3773, irq 7

    2: ethernet2: the address is 00d0.b792.409d, irq 11

    Features licensed:

    Failover: enabled

    VPN - A: enabled

    VPN-3DES: enabled

    Maximum Interfaces: 6

    Cut - through Proxy: enabled

    Guardians: enabled

    URL filtering: enabled

    Internal hosts: unlimited

    Throughput: unlimited

    Peer IKE: unlimited

    Serial number: 480221353 (0x1c9f98a9)

    Activation key running: 0x36df4255 0x246dc5fc 0x39d2ec4d 0x09f6288f

    Modified configuration of enable_15 to 12:15:28.311 UTC Wednesday, may 1, 2002

    pixfirewall (config) #.

    Here, you should see if THE or 3DES, AES encryption is active or not. If you have just SOME so you can use the following link and get for free a new activation key that allows 3DES and AES.

    https://Tools.Cisco.com/swift/licensing/JSP/formGenerator/Pix3DesMsgDisplay.jsp

    sincerely

    Patrick

  • Can someone help me to establish a wireless connection with an Android Cruz Tablet and a Linksys router?

    I have a Linksys WRT54G2 V1 and received a Velocity Cruz T301 and cannot figure out how to configure this wireless, I don't have the cd or the manual that is supposed to come with her. Any ideas on how to solve this problem? I've got Linksys plugged into my desktop ok, but when I try to access the installation page that says let him the empty user name and use admin as password should it take me to the installation site. That is not the case, that is to say invalid.

    Tablet turns on fine and shows different connections wireless with little locks on them. The 1st time I tried to set up a connection, he showed with others, but it has a lock on it and wants to know the password. He used the name of my computer not the Linksys.

    My computer is hooked on one of the 4 ports and says that I have excellent connections. There is a Linksys right below that, but he said connection is bad. It is not locked, but is not strong enough to get even on the tablet of the Cruz connection.

    Now I know why I've always had wired connections, cause it makes me crazy. If anyone can help I'd be very happy. If only I could get across to the top of page the things would be very different, I'm sure, but it is just let me access it. I tried 3 different browsers. My computer Windows Vista on a Dell vostro 220 desktop is connected to the Linksys router and works fine.

    Hello

    Please see the link below.

    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

    I suggest also please contact the manufacturer of the Tablet for assistance.

  • Wireless and VPN RV042 router WRT54G

    Respected member, please help if you can! I have an ADSL with dynamic connected with the wrt54g router, I recently bought RV042 and want to connect the wire coming from wireless with ports. so, basically, I want to use RV042VPN for help after the router, is there a way I can use vpn behind with port using RV042 router wireless

    I can't be able to connect to the vpn as he seeks is not an ip or WAN/LAN.

    It may be possible if you're lucky. But I highly recommend not to connect the RV042 after the WRT. A VPN server must always have a public IP address. Running a VPN server behind a router NAT (such as WRT) makes it extremely difficult and often it won't work at all. Connect the RV042 directly to your modem, configure it to your internet connection. In this way the RV042 has the public IP and VPN should become much easier. Then implement the WRT as simple access point in your network by changing the address LAN IP of 192.168.1.1 to 192.168.1.2, disable the DHCP server, and connect a LAN port of the WRT on a LAN on the RV042 port.

  • L2L pix 501 and remote access VPN

    Hi, I'm working on an old 501 PIX w / Software 6.3 (5), he already have access to remote VPN configuration and works very well, but now he needs a L2L implemented. One thing I try to do all the work remotely via VPN or ssh to the machine. I don't know what's on the other end, but they swear that it is set up and maybe my problem is when I start putting in orders for the other VPN it breaks the remote VPN access. One thing that I have to do is NAT a host on the inside to appear as another host on the end. I use these commands and I think it works cannot be said.

    access-list 101 permit ip remote_network 255.255.255.0 local_server host

    public static 10.1.0.203 (inside, outside) - access list 101

    then

    access-list 102 permit ip host 10.1.0.203 192.168.50.83
    access-list 102 permit ip host 10.1.0.203 192.168.50.86
    access-list 102 permit ip host 10.1.0.203 192.168.50.50
    access-list 102 permit ip host 10.1.0.203 192.168.50.85

    and use it to match against

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    EMDs-map 10 ipsec-isakmp crypto map
    correspondence address card crypto emds-map 10 102
    card crypto emds-map 10 peers set remote_vpn_server
    card crypto emds-card 10 set of transformation-ESP-3DES-SHA

    then

    ISAKMP key magic_key address remote_vpn_server netmask 255.255.255.255
    ISAKMP identity hostname
    part of pre authentication ISAKMP policy 10
    ISAKMP policy 10 3des encryption
    ISAKMP policy 10 sha hash
    10 1 ISAKMP policy group
    ISAKMP life duration strategy 10 86400

    and that is where it usually breaks the VPN, I don't know if the other VPN works due to not being not able to get to this server to try to ping, I don't really like to try this stuff remotely but I don't have a lot of choice at the moment.

    Any thoughts?

    Thank you

    Jarrid Graham

    Yes, just use the number of different sequence with 1 name of the crypto map. Please also ensure that your dynamic crypto map, which is your vpn client has the sequence down the crypto map (more), because you want to make sure that the static crypto map (for lan-to-lan tunnel has higher sequence number (lower number)).

    The political isakmp sequence number does not match, it is processed from top to bottom (number less than the high number) and also long 1 set of isakmp policy corresponds to the remote peer, it will be negotiated properly.

    Hope that answers your question and please note useful post. Thank you.

  • Firefox and a Linksys router

    I run a bed and breakfast. I have a router Linksys (EA6200). Thanks to the support of Linksys, I found solutions to help the login page appear for my guests in IE and Google Chrome. Unfortunately, it is still not load in Firefox.

    I want this to work just like when you go to a café or restaurant of fast food with the WiFi. I don't want to tell clients that they must do this or that if it is really simple to do.

    Any reason, why this does not work in Firefox and how to fix?

    jsher2000, you're awesome, but I guess you've heard this before. Bypass cache (Ctrl + Shift + R) didn't work, but put them in another URL worked like a charm.

    PROBLEM SOLVED!

  • ASA VPN server and vpn client router 871

    Hi all

    I have ASA 5510 as simple VPN server and 871 router as simple VPN client. I want to have the user ID and permanent password on 871 and not to re - enter username and password since 871 uses dynamic IP address and every time I have to ' cry ipsec client ezvpn xauth "and type user name and password.

    any suggestions would be much appreciated.

    Thank you

    Alex

    Do "crypto ipsec client ezvpn show ' on 871, does say:

    ...

    Save password: refused

    ...

    ezVPN server dictates the client if it can automatically connect with saved password.

    Set "enable password storage" under the group policy on the ASA.

    Kind regards

    Roman

  • 1710 VPN and VPN Client - routing problem '' maybe. ''

    Hello

    I was able to get with 3DES and CISCO VPN Client 3.6.1 1710. with permission of local aaa.

    When I am connected to the VPN I can ping to the IP address of the VPN router

    (24.x.x.x.) and I can ping to the router's internal interface (192.168.x.x).

    The problem is that I can't ping anything else - for example: hosts in the enterprise network (192.168.x.x).

    Configuration:

    The router's internal IP address: 192.168.x.x

    The router's external IP address: 24.x.x.x

    ippool for customers: 10.10.10.x

    The IP address of the Client after the connection is correct: 10.0.0.x (from pool)

    Maybe I'm missing something in 1710 confg? I have NAT interface internal? The default gateway of the net is FreeBSD, not the router of 1710 system.

    All ideas are welcome.

    Miro Pendev

    TI Administrstor

    Quite often, you will lose the first ping because an ARP must be sent and responded to, but if you get the subsequent pings, then it's OK.

    For what is able to browse the Internet while the tunnel is up, you must enable split tunneling. Add the following:

    > access-list 110 permit ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

    > isakmp crypto client configuration group my_usergroup

    > acl 110

    This means that the client will only encrypt the traffic to the 192.168.1.0 network, all other traffic shuts down in the clear on the Internet.

  • PIX 501 and pcAnywhere access rules

    Hello

    I'm having a problem with the implementation of pcANywhere remote access Access 2 servers on the inside network. I created 2 static rules and access lists 2 to start, but I can't get thru to the server. These are the settings

    static (inside, outside) 7x.x.x.x 5631 172.16.x.x tcp 5631 255.255.255.255

    static (inside, outside) udp 7x.x.x.x 172.16.x.x 5632 5632 255.255.255.255

    list of allowed inbound tcp access any host 172.16.x.x eq 5631

    list of allowed inbound udp access any host 172.16.x.x eq 5632

    Access-group interface incoming outside

    Version 6.3 of the PIX using

    I also tried access server list terminal server because another method of access, but not go either.

    There are no other rules.

    Any ideas why this would not work?

    TIA

    Vince

    your external ACL must mention the public IP address of your server:

    list of allowed inbound tcp access any host 7x.x.x.x eq 5631

    list of allowed inbound udp access any host 7x.x.x.x eq 5632

  • Place a FIOS for VPN router behind PIX 501

    I have a Verizon FIOS internet connection and one of their routers wide wireless broadband, and this is a configuration of base completely... their router DHCP and firewalls, and the connection has a dynamic address.  I would put the PIX 501 behind the Verizon router as one of its clients and make the VPN PIX of other PIX 501 at other locations, such as my entire network has access to remote networks.

    Is this possible, and if yes, any who could some suggest configurations (how to address internal and external, static routes ports that may be required somewhere, etc.)?

    Thanks for any help.

    When installing my FiOS, I had already asked that it be installed on the Ethernet cable. Don't know they need to do something for you to spend the coax to Ethernet.

    The best way to test it would be to find the Media Converter (follow the coaxial cable between your FiOS router to the demarc and there should be a box with a coaxial port, some phone Sockets and an Ethernet port). If you unplug the coaxial cable and plug a laptop computer on the Ethernet port, see if your laptop takes a public IP address. If Yes, then you just have to run to your PIX501 Ethernet cable and you should be ready.

    Just to note that Verizon, according to your region, reserved DHCP assignments. This means that you may need to call Verizon and ask them to release the previous assignment of DHCP-MAC addresses. I had this happen recently. They must release the assignment then your PIX will pull a new IP address and they will book your new IP - MAC address assignment. They do this to speed up the connection to a cold start time on the router.

    Basically, they are filtering by MAC address, but rather through a sticky ARP where they clear the entry, and then the next device that connects records his MAC address and then only that device is permitted to connect to this leg of the cable. So there is a bit of work you have to do, but the most difficult part would be sitting on hold waiting for a tech, if you call to Verizon.

  • PIX 501 will ios ver 6.2 come to him, with only 16ram 8flash? Thank you

    Wanted to load pdm 2.1.1 firewall and VPN. Found 501 takes ver 6.2 but not to enother ram.

    Thank you

    Phil

    From http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_62/relnotes/pixrn622.htm#xtocid4 :

    "The PIX 501 has 16 MB of RAM and will work correctly with Version 6.2, while all other PIX firewall platforms continue to require at least 32 MB of RAM (and are therefore also compatible with Version 6.2 or newer).

    In addition, all units except the PIX 501 and PIX 506/506E require 16 MB of Flash memory to boot. (The 501 PIX and PIX 506/506E have 8 MB of Flash memory, which works correctly with Version 6.2) »

    PIX firewall model... Flash memory required in point 6.2

    PIX 501 .......................... 8 MB

    Steve

  • QoS is supported on the Cisco PIX 501 or 506th?

    Hello

    There is no mention of QoS in technical for the PIX 501 and 506 records but nothing for the 515. PIX OS 7.x configuration guides do not mention specific material support.

    Does anyone know if QoS is taken care of in the 501 or 506th - I need support lines expectations for VoIP over IPSec.

    Thank you

    Chris

    QoS is supported in 7.x code, you would have to level 501/506 to 7.x code, but this is not supported on these two models, the next logical solution would be to upgrade your PIX 501/506 to asa5505s.

    Rgds

    Jorge

  • Reseting ipsec on PIX 501

    Hi all. Just a quick question. I can't seem to find how to reset ipsec on PIX 501 and force her to negotiate again and I also want to reset statistics for ipsec his. I know that I saw somewhere, orders, but now can't seem to find the commands from anywhere.

    Thanks in advance for any help.

    Hello...

    Config mode...

    ISAKMP crypto claire his

    - and -

    clear crypto ipsec his

    PS. You can find the commands on the PIX by entering the configuration mode by typing...

    PIX01 (config) # clear cry?

    Hope the above helps and please note messages!

  • sick of frustration... 501 and ACL

    Hey all, what gives.

    I worked on a pix 501 and I can't get the ACL to save my life. I'm new on this and obviously missing something. I have a 501 connected to a cable broadband account is public ip through DHCP. I want to limit all traffic going out to 80, 110 and 53.

    I add the following commands.

    access-l 125 permit tcp any any eq 80

    access-l 125 permit tcp any any eq 53

    access-l 125 permit tcp any any eq 110

    access-l 125 deny ip any one

    access-g 125 in interface inside

    everything falls to the interface I think. I am able to browse the net, Kazaa, sof2 throughout the day if I use the default configuration provided by the firewall. I posted this before and actually got it to work once. I tried to repeat the process, but failed.

    any help is GREATLY appreciated

    humbly yours

    MB

    Add

    > access-l 125 permit udp any how any eq 53

    DNS searches with UDP, TCP not. You will find probably your DNS resolution does not work, so when you navigate to a web server by name it will fail, because the first thing that your PC will do is a name search.

Maybe you are looking for