PIXMA MG5420 won't print wireless

Similar Questions

• Canon Pixma MG3100cant use to print wireless

  I installed it,., he used a lot before... now it won't print or scan from my laptop... but now I have a new network and lost Disc... but it works very well for my husband on his desk, he will not be printed repeat me printing error... can u please advice?

  CCFC salvation!

  Welcome to the Canon Forums and thank you for your inquiry! Thank you for your participation, but we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. Canon Forum is organized and hosted on the territory of the United States by Canon USA. We are only able to provide support for the products of Canon produced for and used in the U.S. market. If you live outside the United States, please click here and select your country or region for your support needs. Feel free to discuss products Canon sold outside the United States, but please be aware that you won't receive support directly from Canon USA.

• C4780 won't print, wireless or USB

  There is, I changed the name/pw in my wireless network, and my C4780 printer, I used as a wireless device has stopped working.

  Today, I tried to reinstall the software to change the settings of the printer wireless and the installation wizard will not even recognize it when it is on a USB connection. I know that's not the cable or the computer, because if I install the driver without setting up the printer, it appears in Print & Fax in the system prefs. But it will not yet be printed via USB, and I can't understand how to set the wireless settings or the other.

  What should I do? It's incredibly frustrating, it is practically new and completely functional.

  I am running Mac OSX 10.5.8. I have reset the settings on the printer wireless, I uninstalled and reinstalled the HP software several times. I tried to change the name of the network to what it was, but (I guess that since I had already reset the printer's wireless) that no longer works.

  Make an another "reset network Defaults" configuration > network on the printer.

  Now reset the printer by turning it off, disconnect the power supply from the back of the printer (not pregnant), wait 30 seconds, plug in and turn on.

• C4780 - won't print wireless

  Hello

  I spent about 2 hours until this installation and set up my new c4780. I ran the set up CD, everything completed successfully (but not the first time), including how to set up the wireless connection. However when I arrived at the end of the implementation process he said that was not the installation of the printer. He had not obtained at the point of telling me to unplug the USB cable (what would happen, they say).

  The result of all this is that it will print when connected to the pc through the cable usb, but if I disconnect the cable and try to print wireless, he said "the printer is offline.

  The wireless signal is present (blue light display) and the signal is strong.

  Can anyone suggest what I should do - not too technical if possible, although I am patient by following the instructions!

  Thank you.

  OK, you're in great shape.  The printer is connected to your router and you can see on your computer.  You are so far in front of most of the people and are almost cooked.

  I'll assume that the software is somehow loaded until the end (I could be wrong on this subject).  If so, we will manually add the printer:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• hp4620: doc files Microsoft won't print wirelessly on hp 4620. EPrint diagnostic test page prints OK.

  Software: Microsoft Word 2003, SP3

  Hardware: Dell desktop

  Operating system: Win7 64 bit "of origin".

  Printer: all-in-one hp 4620

  Note: 'print page' and other wireless diagnostic ePrint tool work very well.

  Problem: Unsable of printing from Microsoft Word doc.

  Popup Error Msg:

  "Unable to communicate with the printer.

  "The print job failed because the printer is not connected or not available. Check your cable or Wi - Fi and make sure the printer is powered on and ready. »

  This problem may occur just after I just sent a test print the ePrint tool page.

  «# - hId-pgWebServicesSetup.»

  Summary:

  HP ePrint diagnostic tool works very well, including the test page.

  Printing from Microsoft Word Gets the error msg.

  NOTE:

  The same Word doc file prints with hp 8100, in the same room, using the same wireless ePrint network, as described above with hp 4620

  Problem solved with the firmware update.

• M252dw Pro: color laser m252 jet pro won't print wireless

  I have a new color (Christmas) HP LaserJet Pro M252dw. It was wireless printing but suddenly no longer. I rebooted, checked the internet, wireless is running. What should I do?

  Oops! Never mind - found the problem. Apparently, my printer was not selected as the default printer. Don't know how it happened, but all is well now.

• OfficeJet Pro 8600 more - won't print wireless

  Installed a new 8600 more printer.  To install it on my network.  My laptop sees the printer and scanning function will trigger and talk back to my laptop.  When I try to print, however, printing fails with the error "unable to communicate with printer."  Any ideas on how to solve this problem?

  Hi valledigna,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall Officejet 8600 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-97846-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4323652 & sw_lang=.

• Printer (Canon Pixma MP480) do not print

  My Canon Pixma MP480 won't print on my computer, but print on other computers that do not have Vista. I installed the driver several times more directly from the cd that came with it and directly from canon website. I am registered under an account to administer. It is directly connected via a USB port. The strange thing is, it's an all-in-one printer, scanner, copier, and it allows me to scan images on my computer. When I try to print a document, it times out. No error message appears on the printer LCD. It works on my friends computer that uses windows XP... My operating system is Vista 64 x.  If anyone has any advice I would be recognizing an email to

  Hi davemsee,

  Have you try to download the latest driver for your printer from Canon?
  Make sure that it is the Vista x 64 bit driver when you download and install.  Remove the old driver completely and restart the computer before the upgrade to the new driver.

  Post back with the resulf so we can provide you with more support, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• HP 7510 AIO printer won't connect - Wired workstation, printer wireless

  Hello!  I'm talking about (and verified solution button) too early. The printer still "disappears" from the wired network XP workstation. The only difference as apply the given solution is that disconnect it now happening about every 12 hours, against every two hours.

  Ink notification has the value "only when I print.

  Static IP address is defined for all machines

  HNDU works - when the printer is visible, but hangs at the workstation if the printer is not visible.

  Follow the original comments below;

  Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  I think it's fixed now... the problem seems to lie in the module that will inform you immediately if the ink is low (vs only notify me when printing).  If, during the initial installation, the user selects 'immediately', then the printer will disappear randomly. (More on "re-find" later.)

  In addition, it is difficult to change the notification of ink setting, because it doesn't seem to be 'sticky', but will sometimes flip. (I don't understand this yet).  As long as the 'notification of low ink' setting is on "only when printing", life is good.

  If the printer does not disappear, go to the Advanced tab when the printer software/firmware page, instead of the current ink level.  Reset the selection on "tell me the notification of ink" to "only when printing" and then toggle the "autoshut off' from 'NEVER' to '2 hours' and then, finally, a return to '' NEVER. ''  Then, finally, press closed on the Panel.  Printer must be connected again. To test, returned to the Photosmart 7510 app and select "Show estimated ink levels".  The meter will start at 1%, to 41% and then bounce around until it displays the ink level.

  FOR HP TECH: Please consider the "ink level notification" persisted to the registry OR to provide an of-install tool that will completely clean any prior installation of 7510 driver / app in the registry, to install a new can have this setting properly recorded.

  Hope this helps some of you: it's a great printer after its running!

  Jim

• OfficeJet pro 8620: HP 8620 won't print via wireless for nay on my home mac

  I have 2 Macs in my home, Macbook, and Macbook Pro running Yosemite. I tried to implement a pro 7310 office via an ethernet cable printer to print wireless from these two macs and after 3 frustrating months trying everything that I could find, I bought the 8620 thought that would solve everything.

  Instead, it's the same. I am trying to print from firefox or word or anything and it cannot find the printer. But if I turned off everything, including the Mac and the router (N of Belkin N300 router wirleless) and the computer and then turn them back on, the printer is detectable and prints well. It just seems to disappear and I can't find it when searching for available printers after a few hours. I installed the last softeare for this printer and it worked when fine forst, implemented.

  Any help would be greatly appreciated that I spent way too many hours trying to figure this, it doesn't help that I'm not that tech savy.

  Thank you!

  Hello @bokke ,

  Welcome to the HP forum.

  I understand that you are having problems of communication between your two Macs and your 8620.

  I would like to help.

  Three things have caught my attention.

  You said that this is happening to both computers.

  You also mentioned that the same thing happened to another model of printer.

  Finally, after you power cycle your network everything works. At least for a little while.

  I feel that we should seek less software and more to your network.

  Belkin N300 wireless N Router, how old is this router?

  How is the printer to the router?

  Your router should have the following configuration

  ~ The multicast must be on or enabled (allows connectivity Hello)

  ~ Wireless Ports, they can also be frozen in security software:

  The incoming (UDP) ports: 137, 138, 161, 427

  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

  ~ Our printers support only the 2.4 GHz not 5 GHz

  ~ Recommended that the network name and password DO NOT containing and spaces/punctuation or special characters ~ Dual Radio enabled (for b/g wireless & networks n)

  ~ Mac disabled filtering

  ~ The built-in firewall must be the default or the lower settings

  This should solve the problem.

  PORTS TO UNLOCK.

  UDP: 137, 138, 161, 427, 80 & 443

  TCP: 137, 139, 427, 9100, 9220, 9500, 5222 5223

  So please make sure that multicast & Hello are enabled. Also never hurts to check for an update of the firmware.

• WHT won't my printer wireless Brother Printer ModelMFC-8885CW work?

  I tried for several days now to get my wireless Brother printer to work!  Have you had any luck getting your printer wireless Brother to work?  If so, please tell me or show me how!  Well, it's time to go take a NAP, sincerely your friends in Iowa City, Iowa Bob and Connie Richards.

  [Yet another double of http://answers.microsoft.com/en-us/windows/forum/windows_7-winapps/why-wont-my-brother-mfc-8885cw-wireless-printer/c2b3f065-e359-4622-840d-364a3fea0422]

  How does this relate to the features of Windows Update?

  The manufacturer of the printer has confirmed that the printing software currently installed is supported in IE9?

  PS: Go get a gallon of milk for me while you're in the store, OK?  Oh and some cheezy-Poofs, too. Go to the Church. IRA, too?

• PIXMA MG5420. Can not find a way to scan on my new laptop

  Hi, I bought a new laptop. Him, I can print without problem. But the scanner is connected to my old laptop. I can't understand how to do the scans to go to my new laptop. I have windows 8. Thank you.

  Hi oasis1180,

  You will need to have the printer drivers and utility program to Scan of IJ (installed with printer drivers) installed on your laptop to scan wireless.  If you need to download the latest drivers for your printer, you can do it on the Canon USA site.   Please click here to access the drivers and software page for the PIXMA MG5420. Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "DRIVERS" section and click on the MINI MASTER CONFIGURATION file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the Mini Master configuration file, double-click the file and follow the prompts to install the printer and the IJ Scan Utility software on your computer.

  Once the program and drivers are installed, you will want to ensure that the IJ Network Scanner selector EX is running on your computer so that you can scan wireless.  To do this, from the windows screen, at the bottom of the window under the tiles, you will see an arrow down.  Click the arrow, and then find the Canon utility section and click the icon for the IJ Network Scanner selector E.G.  Once the program is launched, please follow these steps to scan:

  1 IJ Oepn scanning utility.

  2. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  3. click on the DOCUMENT SCAN or PHOTO SCAN option in the left pane of the window, depending on what you want to scan.

  4. in the SAVE the SETTINGS in the window section, you select the recording format and the location of the document you are about to analysis.

  (a.) in the FILE NAME field, specify the name you want to give the file. By default, the file name will begin with IMG; You can remove IMG and change it to anything you want to name the file.

  b.) b.) in the field of DATA FORMAT, use the drop-down menu to select the desired option. If you are scanning a document with several pages, select PDF (Multiple Pages). Note: If you are scanning photos, you will have the ability to scan objects to JPEG, TIFF or PNG.

  (c.) in the field RECORD in, please go to the area where you want the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.

  5. once all settings have been selected, click on the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  6. click the DOCUMENT or PHOTO, depending on what you are trying to scan button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. The scanned images are saved to the location of the selected folder previously specified in the SETTINGS... window.

  If you find that you need to analysis advanced options such as setting resolution, brightness, contrast, saturation, balance colors, etc. in addition to the options selected above, please click the SCANGEAR button on the utility main screen Scan of IJ, then adjust the necessary elements.

  I hope this helps!

  It has not responded to your question or problem? Find more help contact us.

• HP F4580: Printer does not print wireless

  Hi there, can you help?

  I have a HP F4580 which will only print with the wire attached to my computer printing and the custom of my laptop either.  Ive done all the tests and it won't always feel. What should I do next?  TIA

  Hey there @Listento!

  Thanks for posting on the HP Forums!

  I would be happy to help with your HP Deskjet F4580, and wireless printing.  I can give you some suggestions that will hopefully solve the problem!

  If the printer wireless light blue which indicates its connected to the network.  I suggest to reconfigure the connection of the printer to the router to connect.  Once the printer is connected to the network then you can try to add the printer to the computer using the HP software.

  You will need to remove the printer from the computer first.  To do this, you will need to go into devices and printers from the start menu.

  To remove the device from the computer:

  1. click on the start icon

  2. click on devices and printers on the right column

  3 select your printer

  4. click on remove the device at the top of the window

  5. unplug the USB cable

  6 restart the computer

  To reconfigure the Deskjet F4580 Wireless:

  1. power cycle the printer and make sure that the USB cable is NOT connected at this time.

  2. install the HP software CD into the computer (if you don't have it click here: Deskjet F4580 Software)

  3. follow the installation of the software

  4. There should be an option to set up WiFi

  6. it will check the network environment and then ask you to connect the USB cable

  7. connect the printer via the USB port and follow the installation of WiFi program

  8. at the end it should ask you to remove the USB key and print a test page

  To add the printer to the laptop:

  1. install the HP software in the computer CD (if you don't have it click here: Deskjet F4580 Software)

  2. follow the installation of the software

  3. to find the printer on the wireless network

  4. follow the software configuration and test printing

  Please post back and let me know if this worked for you!

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!