PIXMA MX882 stopped scanning on WiFi

Similar Questions

• HP Photosmart C4780: HP Photosmart C4780 stop scanning

  My printer is HP Photosmart C4780 allows to analyze, but has stopped scanning, but will print & copy.

  I get the error mess "parse error. Try scan from computer or see the documentation. Press OK.

  I checked the systems running and have revived the latter, which has been proposed for the same problem

  anyone else had previousky.  TKS in adv

  Hello @Williams2and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have any questions about your ability to scan.  I would like to help!

  You are connected via a USB cable or a wireless connection?

  I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also download and run the HP print and Scan Doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.

  I have a HP pavilion G4, Windows 7. Keyboard stopped working and Wifi off, cannot turn on the wireless device.  I use a keyboard usb type, but has no a wireless on/off button. I tried F12, ctrl + F12 or Alt + F12, etc. without effect. I tried the keyboard of the screen, but it also has wireless on/off button.

  Is there another way to turn on the wireless device?

  Thank you.

  First install the hp connection manager, open it and use the power in front of the wireless button to turn on the wireless connection

  link

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54945.exe

• OfficeJet Pro 8600 stopped scanning

  I have my 8600 Officejet Pro connected to my computer and use Windows 7. When I got the all-in-one, he scanned beautifully. Then one day he just stop scanning. I get an error when I try to scan which said"The HP 8600 Pro Ofifcejet not found. »

  I ran the HP Print & Scan Doctor half a dozen times and to halfway through, I still get the error message "The HP Officejet Pro 8600 was not found."

  On the HP Print & Scan doctor, when she leaves, I get a screen that verifies offshore:

  -Device Manager

  -Pilot Check

  -Device status

  -Windows (WIA) Scan

  And then I have a yellow triangle with an explaination in next to "HP Twain scanning" brand

  He has a box that says: "Please save your work and close all applications. Unplug it from your printer by pulling on the power cord from the printer. Plug it back, turn it back on, and then click "Restart the computer." Once the computer is restarted, run this utility again. "What I've done several times - it doesn't change ANYTHING. Still, I get "The HP Officejet Pro 8600 is not found" error box again...

  I would add also, I was able to print without missing a beat and I use a USB cable to connect the MFC to my PC as our wireless here at the office isn't bad.

  I would be very happy for any help and suggestions that someone has!

  Thank you!

  RobbieLee

  Hi RobbieLee,

  I see that you have some difficulties now scans your Officejet Pro 8600 to your Windows 7 PC.

  Please, try this and let me know the result.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Lemark suddenly stopped scanning. It makes a rattling noise.

  2600 series Lemark suddenly stopped scanning.  It makes a rattling noise.

  Instead of posting your question in the Feedback forum, where you post your feedback on the web site of Microsoft Answers, you should have posted in forum hardware and drivers, which is where I moved your post.  Please return to your message, click on edit, change the Version of Windows, menu dropdown to indicate which version of Windows you are using, and then click on submit.

  Frankly, you should talk to a repair shop, don't ask this question here.  It seems that the internal mechanism in your Lexmark has failed.

• PIXMA MX882 print serrated or lines stands?

  I have a Pixma MX882 printer who has had problems lately.  When printing straight lines, they come out bleachers or staircase.  This seems to be particularly noticeable when printing horizontal or landscape.  If I print a shipping label to the France for example and it is turned sideways on the page in portrait mode, the lines come out stairs or staircase.  The same is true if I print a spereadhseet in the landscape.  The cell border lines are reinforced.  I run a cleaning complete and done alignment.  Test page comes out fine with no progression. If you have any ideas of what I can do to fix this problem, please asdvise.  Thank you!

  Hi dbghouse,

  Since cleanings and alignments has not resolved the problem, the printer may require the provision of services; Please call or write us using one of the methods on the page contact us for further assistance.

• OfficeJet Pro 8500 first stopped scanning

  My Officejet Pro 8500 has stopped scanning.  The message window says it is not connected to the network.

  I changed my DSL provided by the local cable company to ATT U verse a few months ago, but the problem does not seem to be related to this change.  I say this because when I ran the diagnostics, the printed page says that my problem is "the wireless radio does not work. Contact HP support. »

  HP support offered advice tech for $29) warranty, or sell me a new all-in-one.

  The wireless radio can be fixed? Is it a software problem.  I have to buy a new all-in-one?

  Hello JessicaD,

  I see that you have a problem with the wireless radio fails on your Officejet 8500. To inform you in this regard, if the radio has failed, it is not a replaceable part by customer, but I'll try to help you with the problem.

  Start as a result of this document: printer does not maintain the wireless connection.
  With this document, I would like to track:
  (1) restore your default settings of network on the printer.
  Go to setup (can be a wrench), network, and then restore the default settings of the network. After that the power on the printer.

  (2) turn off the wireless radio.
  Go to Configuration > network > wireless radio, you must have the option to turn it off.

  (3) hard reset of the printer.
  While the printer power cable for 30 seconds, while the cable is unplugged, press and hold the power button for 15 seconds. It's draining the printer of all power. Reconnect the cable.

  (4) turn on the wireless radio and reconnect.
  Go to Configuration > network > wireless radio - on. Then, go to Configuration > network > wireless are running the configuration wizard.

  If it was not successful in entering you connected to the network and or print wireless. You still have another option with the printer to try before replacing.
  If you have an Ethernet cable, you can set a wired network connection. Plug the Ethernet (cat5 cable) cable into the printer and the router. It will be assigned the printer a new IP, which means that you will need to add the printer to the computer. This will still allow the printer on the network and communicate with a wireless device.

  Please try all above and I would like to know how everything goes. Thanks for posting on the HP Forums.

• 1355cn stopped scanning

  My cn 1355 is on my home network.  I have fine print, and have swept between her on the network to an application.  The other day it stopped scanning.  Nuance PaperPort (shipped with the printer) say now when running configuration Analyzer Wizard "no software not detected.  The scanner power is off, the cable is not correctly connected, or address IP settings are correctly entered. "I am running Windows 7.  By checking the printer selection dialog, it indicates that the printer has a valid address is in energy saving mode and has a green check mark.  I can always print it.  ???

  Since the announcement, I saw another thread on the same topic. The printer is supplied with software PaperPort 12 and then the selection "analyze" the software reports "Scanner not found". There is a button on the bottom of the dialog box in PaperPort with 'Port '. I selected that, no changes, just accept the settings and then tried to scan again - and that market as before!

• HP Photosmart CA4800 stopped scanning

  During the installation of MAC OS X 10.63, HP Photosmart CA4800 stopped scanning, I am on a limited income and I rely on this printer/scanner and cannot afford an upgrade, suggestions on how to make this work?  I read most of the problems and the tags, but there must be a solution.

  Yes, you can only buy 10.6.3 (I checked last), but you really need to do software updates again and again until there is no more

• HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  If HP is unable to repair it, nobody else can either.  Buy yourself a cheap Canon scanner if they cannot make it work.

• HP Deskjet 2450: Stop scan

  Scan stopped

  For no reason that I see, my scan stopped. It worked pretty well.

  I'm on wifi, and printing continues to work.

  I've been on 10 Windows for quite awhile with no problems.

  When I hit the scan, I get a note that

  The HP Deskjet 2540 series was not found.

  I reinstalled the software from the HP site.

  I turned off the router, pc and printer in different combinations.

  Any suggestions would be welcome.

  Reg

  Hello

  Thank you for using the HP forum.  We would suggest that you uninstall and reinstall your printer software.

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-PSC-2400-Photosmart-all-in-one-printer-series/303752/model/324248#Z7_3054ICK0K8UDA0AQC11TA930C7

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Hope that helps!

• Photosmart 7510 stop scan to PC (Windows7). Diagnostics and help have not solved.

  Printer - Photosmart 7510.

  System: I'm on Windows 7 home premium 64-bit, I have Norton 360.  Laptop is Acer Aspire.

  Problem - Photosmart 7510 - scan is no longer to the PC.

  Software won't uninstall (so I can ' t reinstall)

  Connect the printer software installation impossible (he always recognizes the printer on the network)

  Scanner not recognized.  When I click on scan HP he says 7510 series unrecognized.  If I click on manage scans devices/printers, nothing happens apart from hourglass.

  I lived all the online help and scan doctor and spent 3 days on this.  Nothing seems to fix it or repair.

  The scanner, printer and copier what worked first implemented, including scanning to pc.

  Now, everything works apart from scanning to PC.

  A few days later the scanner to the computer stopped working and could not be recognized if clicked (for example to allow the scan to PC function).  Scanner the doctor then tried to uninstall and reinstall the software.  The basic device HP software won't uninstall, whether through the HP program or control panel.  There after the reboot, even when supposedly uninstalled.  I tried to reset the defaults on the printer, turn off the power sector, removing the printer from devices and printers, fixing and cleaning the registry errors, checking all relevant WIA and CPP are restarted and automatic according to the directives of this help: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Photosmart-7510-won-t-scan/m-p/1749193/high... I followed all the HP help topics and have tried drivers updated and installation of HP.com.  My laptop was rebooted about 50 times in the last three days trying to get this resolved.

  When I click on the printer defined upward and the software it prompts you to connect the new printer.  It finds my 7510 (wireless), but says that it cannot install it.

  I can't do windows system restore, because there is no set of restore points.  I tried to disable firewall for connections and installation of the software.

  Various error messages appear:

  During the uninstallation using the control panel.

  "Scan to PC Activation App" needs closing (I can only find in the tasks of process manager I then complete the process)

  If I try to use the HP uninstall later said there is no uninstall HP.

  I have the original CD.

  Any ideas as to how my scan to PC to work again?

  Maybe this isn't the case in your situation, however, security software (firewall/anti-anti-virus/malware) can cause endless problems, depending on their configuration. Norton 360 is an extremely invasive program, part of what makes it so effective. But, get the settings to allow access install/uninstall the devices through 360 can be complicated. My advice before you try anything else, would be to disable Norton 360 (gives you regular intervals) then try Solution 3 in the Windows 7 of this troubleshooting document installation section:

  http://goo.GL/Qtbcf

• photosmart HP 5510 scan via wifi mac osx

  How to scan a document via wifi on mac osx? I have this error:

  

  Don't forget to add the pritner as pie according to the steps below

  1. Click on the Apple menu and then click on System Preferences .

• Kodak c310 prints but stopped scanning

  my printer has a reason any stopped my pc regonising in the menu when you print ideas

  Hi Andy,.

  -What version of windows is installed on your computer?

  -Is a printer wired or wireless?

  -Do you get any error message or error code when you try to scan?

  I suggest you to uninstall and reinstall the printer drivers Kodak c310 and check if it helps.

  For uninstallation,.

  http://support.en.kodak.com/app/answers/detail/A_ID/1346/kW/Kodak%20ESP%20c310%20Printer%20drivers/selected/true

  To re-setup,.

  http://support.en.kodak.com/app/answers/detail/A_ID/36670/~/Kodak-EasyShare-software---Windows-operating-systems/selected/true

  It will be useful.

• HP 3050 has - J611a > > head scanner stop scanning continues.

  Hello

  The printer is new and has been installed correctly by following the instructions from HP, and all functions work correctly, printing and scanning on WI - FI, high quality printing and scanning quality.

  It is used on an i3 with 4 GB of ram and Windows 7.

  My concern is the scan head. His movement is continuous from one end to the other, but when I set the DPI 100 dpi more than 200, then the head like this:

  -It moves about 4 cm, then stopes (the pilot light also arrested), back about 1 cm, and then he took over the movement. This pattern is repeated some time until it reaches the end. The quality of scanned file is not affected.

  -Also when the printer powers on the movements of head scanning back or front ~ 5 - 6 times over a distance of 1 cm, then stops.

  All ideas, this is a normal behavior? My other HP F380 AIO and other scanners made scanning in a past, without interruption, regardless of the DPI.

  Hello

  It's sounds like normal behouviour,

  The movement at the start is an alignment, the scanner lights looking for a white band that is inside the scannerglas (out of our sight) to ensure that it is in its original position.

  The movenment recurring when higher dpi scan is normal as well, the scanner will scan the document more than once to ensure best results. The F380 had another technology works so different.