PIXMA MX922 print too dark

Similar Questions

• hp deskjet 1510 printing too dark

  Hello

  As says the subject, my HP Deskjet 1510 printer is printing too dark. Does anyone know how to change this?

  Thank you

  Thanks for the reply.

  You try to print a photo, if so what program? If you print word documents, try printing in draft mode.

  I would like you open the printer from the desktop icon or go to Start> all programs> HP> Deskjet 1510> 1510 Deskjet series. The Printer Wizard, click the estimated ink levels> Services> print quality diagnostic report, not this dark printing page as well?

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• CP1515n print too dark photos

  I have a printer HP color laserjet CP1515n's and no matter what I try settings, I can't seem to change the photo printing

  Print too dark

  Can someone help me with this problem

  Welcome to the Forums of HP Bazza46,

  By your post, I see that the photos are too dark print.
  I can help you with this problem.

  I have provided a document to solve Print quality problems see if that will help solve the problem.

  Make sure you select the type of paper in the printer driver and is not a default unspecified paper.

  Most of the settings should be set the application you are printing from.

  You use Genuine HP Toner?

  What kind of paper do you use?

  What are the results when you print the page of diagnostic quality and print?

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet 1300: LaserJet prints too dark gray

  I suspect that this can happen several HP Laser Jet printers.

  Even when I print a C = 0, M = 0, Y = 0, K = 10 Gray (a setting that makes gray barely distinguishable on screen) to the black wire, black is very difficult to read in print. Gray is simply too dark.

  I've looked everywhere and complaints most people about gray printing have to with the gray print thread too light. This isn't my problem.

  I have updated drivers with no luck.

  I am hoping there is a kind of software that will allow me to recalibrate the gray my HP Print.

  Any help would be greatly appreciated.

  There is no utility calibration for this printer. I am certified on them when they were new. Grey s printing too dark and you use the OEM toner cartridges then I would replace the engine Board. If you use replacement cartridges they print darker than the new HP cartridges and I just turn to OEM.

• Canon ip4950 - prints too dark

  Canon Pixma iP4950 printer - prints much too dark. Different profiles tried both through Windows and Photoshop. The difference is well beyond the profiles.

  Parameters of the screen changed, altered the printer, photoshop changed settings. Service customer of Canon unaided with their suggested parameters. Up to date drivers.

  Former Canon iP4600 very good (a lot of use, worn, this display has & is not good up here!)

  Original toner cartridge or cartridges recycled / reloaded / reconditioned?

  It could be a faulty cartridge.

• Pictures Printing too dark

  HP Officejet 6500 a Plus All in One.  Windows 7, 64 bit.  Print all pictures too dark.  I have checked the cartridges, cleaned print head, set preferences - set everything I can think of.  Provides excellent print quality but all of a sudden this change.  Can not think of any change I made to the computer itself.  Any thoughts?  And thank you very much.  Small drives me crazy!

  Thanks for help. I did NOTthink of printing as a PROJECT; may have worked. But only one solution temporary vs a fix, right? I finally gave up and changed the black ink cartridge, even though it was almost new. With the new cartridge, returned to perfect photo printing. Now I think I bought a faulty cartridge. Once again, thaks for taking the time!

• LaserJet Pro M452dn color: Color LaserJet Pro M452 prints too dark

  All prints much too dark. Even in Photoshop, InDesign, Illustrator. I downloaded the user guide, but not able to find a way to adjust the intensity of output. Setting the output seems to be available for Windows only. Is - everyone there knows the secret formula for Mac users? Thanks in advance.

  Hello

  I usually check the option of directly on setting intensity her pinter.

  Go to system set up, select the print intensity or density and 3 is the default setting, it goes on a scale of 1 to 5, five being really dark, replace it with a 1 or 2 and try out it.

  Concerning

• LR 2: workflow colorproofed but prints too dark. Help, please.

  Hello

  I'm new here. I have read all the other threads on this problem and tried all the proposals. But I can't solve the problem.

  In detail:

  IMac

  Progs: CS 2, CS 4, LT 2

  Printer: HP Photosmart B 9180

  Display: iMac + Eizo CG21

  ColorProof by eye - one display and colorvision spectrophotometer for printers.

  I even put the brightness and Gamma of the monitor for each type of paper measuring the brightness/white paper.

  In CS 2 all works very well. 100% matching printmakers.

  In LR 2: too dark images. Printer has the default value. Color-correct profile is selected. Printer is set up for color management software...

  If I send the same image of LR2 to PS2 to modify, print in PS2 without changes, everthing is ok.

  CS 4: Too dark prints as in LR2

  Help, please! I love LT2 to manage the huge amount of images and you want to use for printing photobooks (easier to print if you want to print pictures 20 or more...)

  Anyone have more tips?

  Thanks in advance

  I have the same setup as you, perhaps with the exception of the osX version (10.5.7).

  The impressions of my B9180 are thin and assorted in color managed LR and printer managed.

  Wheter that the printer is set up by default or not never made no difference.

  My printer driver version is 2.3.3

  However, I have the same problem with another printer and LR.

  The fact that people with the same configuration and drivers get different results only confirm my idea that there is a bug / flag in LR who gets together and then all your prints for a certain printer is screwed up.

  I am rather disappointed that Adobe has not corrected this and seems even to the same bug in CS4.

  I won't pay for LR or CS4 until I have confirmation that this bug is gone (if I were to upgrade to CS4 and get the same problem, I would not be able to print over all)

• My pixma mx922 print orange throughout the page. Why?

  whenever we print something in color, it has a tint Orange throughout.

  Hi sbsproperty,

  You can print a printer nozzle check pattern to see if all the inkjet nozzles are to distribute the ink properly.  To do this, please follow the steps located here.  Once the pattern is printed, please examine and compare it to ground of review of the nozzle correctly print here.  If the nozzle check pattern did print not correctly, perform a cleanup at least one and two deep cleanings may solve the problem.  To do this, please follow the steps located here.

  If you still experience the problem after cleaning, the printer may require repair.  Please call or write us using one of the methods on the page contact us for further assistance.

• Photo paper moves sideways when printing on PIXMA MX922

  I have a new Pixma MX922 printer and when you print photos of 4 x 6 paper moves from side to side during the last inch or more printing.  I have tried different paper with the same result, currently have a Canon Photo Paper Plus Glossy II in the printer.  The book seems to begin to move laterally when it makes contact with the paper output tray.  I use the Canon software to print my photos.

  Hi mclark4013,

  To try to prevent the paper to move, we can allow the setting prevent abrasion on the printer paper.  To do this, please follow these steps:

  1. press the MENU key.

  2. Select SETTINGS, then press the OK button.

  3. Select DEVICE SETTINGS, then press the OK button. The device settings screen appears.

  4. use the up/down arrow keys to select the PRINT PARAMETERS, and then press the OK button.

  5. use the up/down arrow keys to select the parameter AVOID the ABRASION of PAPER, and then press the OK button.

  6. use the up/down arrow keys to select Yes, then press the OK button.

  Please try printing again.  Once printing is complete, please be sure to set this parameter to OFF.

  If you still have problems, we ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays) for assistance.  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• I have a Canon pixma mx922 and seems to only print photos... How do I print a document?

  I bought my mom a mx922 pixma to print from your iphone / ipad.  She was printing documents, then pictures, and now she doesn't know how to print the document.  Can anyone help with this?  I'm not in the same State as him, and she is not very tech saavy...

  Hi RONNA999,

  Please check that the PIXMA MX922 is connected to the wireless network:

  1. press the

  button on your MX922 PIXMA.

  2. Select Setup and press the button.

  3. Select device settings, and press .

  4. Select settings LAN, then press .

  5. Select Configuration Wireless LAN and press .

  6. Select your wireless network and press .

  7. Enter the wireless network password and press .

  The PIXMA MX922 will now be connected to the wireless network and it will be able to print from the iOS device.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Canon Pixma Pro - 100 prints very dark

  I see that it is a recuring with the Canon Pixma Pro-100 problem, but nothing, I found an online help I ask and hope someone can solve this problem for me.

  Just picked up a Pixma Pro-100 today and installed on my iMac 27 "(Yosemite) 2011 with the latest drivers downloaded from Canon to be sure to have the website." I also checked the printer firmware but it's later to 1,100. Weather, I'm printing through Lightroom or Photoshop; by Canon Print Studio Pro, my garden image, or by LR / PS directly; with - or without PS as a manager of color; the prints is proving to be much to dark.

  I have to set an exposure of 2/3 in LR to be anywhere nearby to get the same result as on the screen. I am also careful to select the right ICC for correct paper profiles. My monitor is calibrated with a Spyder4pro and I also re-calibrated her during this process to see if that helped.

  Well. Long story short; the prints are dark. So I borrowed 2013 Spyder4pro MacBook Pro (Yosemite my wife) and installed the latest drivers from Canon. Once again; on this machine, the impressions are also to dark with about + 2/3 in order to correct the impression of something that looks like the monitor. The two screens can also be programmed to 30% brightness.

  I also have access to an Epson Stylus Photo R3000 and the prints of that much brighter spell.

  Unfortunately, I see that many others also have the same problem. Then; Here's the question. How can I fix it? Do I have to return the printer and get a refund? Because it's clearly not good enough.

  Thank you very much for your answers. But unfortunately, I have "been there, done that" on all of your advice.

  I go back on Monday to the printer and replace it with an equal Epson printer as I have only good experiences with this brand and the prints I get without using overtime to tinker with settings.

  It was my first (and last) Canon printer.

• large format HP 7110 prints come out too dark when using the choice of photo paper.

  My officejet 7000 would be to print borderless photos size beautiful poster even using a brand off paper. (Staples brand)

  But my new 7110 printer prints much too dark.  I choose the option "other photo paper.

  Hi @Ratboy2k Sunshyn here for help.

  I see that you're having trouble with your 7110 newly purchased. If your photos appear darker when you used the 7000 all programs? Have you tried to change the settings for print quality? You may need to change the quality at the standard. With the help of high quality may cause more ink on the page, your impressions would therefore appear darker.

  It could also be the selection of paper. Even if you are off mark paper, you don't have to choose "other photo paper. What are the options available in the selection of paper and what kind of paper do you use? I understand it of paper Staples, but must have a particular type as advanced, or premium and so on.

  I would like to do everything I can to help. Please post back with the requested details and I'll gladly come back and work with you to find a solution. Thank you.

• My pictures are too dark when printing on an epson printer. they were ok on my last printer

  I just bought a new epson printer xp960. All my images printed from photoshop CS6 are too dark. If the print outside photoshop, they're ok. They printed accurately on my old Kodak printer. Epson sent me to Adobe

  Could you please uninstall the printer drivers once and then install the latest drivers for the printer.