place 8 5830 pro Dell problem

Hello, I'm having a problem with my site, I use my meeting place for all my school work so fixed its very important for me to try to get it.

My problem started when internet explore work stoppage, I need to click on the application and it would be open but not charge anything on the page, I have to type a web address and nothing. So I decided to do a refresh of the Tablet and when I used my flash driver were I got my stored backup I get the error message that the files are corrupt. so I go to the dell website and it connect to the Microsoft Web site and created a recovery for windows 8 using Microsoft Media creation tool.

so I continue to reinstalled windows 8 and now I will have questions without network driver so I can't connect to the internet and the touch screen does not work. I've dealt with dell customer support and I tried twice to get the flash recovery drive who twice

I found that there is not since both times I tried to buy the USB key, the command is cancelled 4 days later.

any help would be greatly appreciated

You need a USB hub. Connect the hub with an adapter USB - OTG to the USB port of the place, then put the 'Intel Atom Z3000 Series Driver' and 'Dell Wireless 1538 WiFi/Bluetooth Driver' on the stick and plug it into the hub. Then also plug a USB mouse and use it to select and install the drivers. After this should work the wifi and touchscreen. This is a normal behavior of windows 8.

You can get all the drivers here:

www.Dell.com/.../Advanced

Tags: Dell Devices

Similar Questions

  • OfficeJet Pro 6830: Problem with multiple Pages into one file

    I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

    I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

    Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

    Please advise.  Thank you.

    Hello

    Scan you from the glass flat or the top of the charger page?

    If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

    If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

  • Number del problema evento: BEX application number: devenv.exe

    I can't launch the application by all means, I have tried almost everything

    This error whenever I try to start the application

    Number del problema evento: BEX
    The application number: devenv.exe
    Application version: 12.0.21005.1
    Marca of tiempo of the application: 524fcb34
    Number del modulo con errores: StackHash_4150
    Version del modulo con errores: 0.0.0.0
    Tiempo del modulo Marca con errores: 00000000
    Exception offset: d4aa3de8
    Exception code: c0000005
    Exception data: 00000008
    Led operating system version: 6.1.7601.2.1.0.256.48
    ID of regional config: 8202
    Additional 1:4150 information
    Additional information 2: 415033a9f1ae6fcc5aebaf4daaa5684d
    3: 86 additional information has 0
    Additional information 4: 86a011b887b8da0d2c7df6b38f9d7e04

    This error seems to be related to Visual Studio.  If you explain what you do to cause this error to appear, it is possible that someone here may be able to help, but I suspect that you would be more likely to get help by asking in the appropriate MSDN (developer) or TechNet forums (technical):

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=visualstudiogeneral

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=whatforum

  • CS6 first Pro installation problem

    I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

    A.pngC.png

    I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

    It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

    Bryson,

    You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

    Thank you

    Kevin

  • Venue 8 5830 Pro upgraded to win 10 Bluetooth keyboard problem

    I could put my 5830-10 Windows using Microsoft 'MediaCreationTool '. I, unfortunately, had no room for the update and had to go to the wipe everything and then install Win 10 option. It worked.

    Unfortunately, many of the drivers had to be updated and I have been busy doing that, but I have a big problem. When I bought the first of all the coming 8 Pro, I also bought a case with a Bluetooth keyboard. The keyboard worked fine with 8.1. To help to win 10, I've matched both the keyboard and a Bluetooth mouse. The mouse works fine, but even if the keyboard is paired, its strikes are not registered and that I have to use the on-screen keyboard.

    I found a post on another site that offers to go into the settings of "accessibility" and disable FilterKeys. Unfortunately, this setting is for the keyboard on the screen and not the Bluetooth keyboard, if it does not work. There seems to be no help in the Bluetooth settings. It shows that the keyboard is paired, but not much else.

    I guess I could try another keyboard, but it worked beautifully with 8.1.

    Any ideas?

    cooverr

    Yes, absolutely... and does not work.

    What I understand, Microsoft has changed their Bluetooth Driver in Windows 10 for safety reasons and it's much older BT keyboards with sloppy software does not work in win 10.

    In case it helps someone, I finally found the solution to my old Bluetooth keyboard work with Windows 10 on the venue Pro 8.

    In the device under Bluetooth-Bluetooth car radio-> properties > Manager there is a tab named 'Power Management'.

    The option "allow the computer to turn off this device to save power" is checked by default. I unchecked it and my old Bluetooth keyboard that worked with Windows 8.1 works on Windows 10 once again.

  • Virtual Keyboard Pro Dell place 8 does not appear after upgrading Windows 8.1 for Windows 10

    About my Dell coming 8 Pro, after having recently upgraded from Windows to Windows 10 8.1, now when I go to Firefox or other applications and click on in a region where the virtual keyboard automatically appears on the screen, it is no longer made. Y at - it a setting I'm not turn on or off in order to correct this problem? Thank you.

    Excellent. Thank you so much MNP3.

  • pro place 8 wireless network connection problems

    I have problems connecting my venue 8 pro to a wireless network. anyone encountered similar to debug and fix issues/options?

    When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  • I am able to download the trial free photoshop on a shelf in place 11 pro dell?

    I just bought a Dell Tablet 11 pro place I was hoping to use for the job. I am able to download photoshop cs6 to it? I tried to download just the free trial Adobe photoshop, but for some reason after that I installed creative cloud and try to download photoshop it starts the download then when he reached 82%, that it fails to download. Someone out there who can help you?

    Please refer to the system requirements | Photoshop for the system requirements.

    Kind regards

    Hervé Khare

  • (Redirected) Place 11 pro Dell power supply issue

    Hi supports,

    I recently have a problem, when the machine come sleep automatically or press the power button a times, the machine doesn't have to wake up. Pressing once, machine vibrating, pressing home page, it vibrates too, but does not not in the following seconds.

    Pressing the power button for the other 3 seconds it vibrates, I think that it is a power on action, but it takes about 20 seconds to the account indicated by the dell logo, compared with 2-3 seconds before. It will then start normally, just Can not sleep.

    When I go into Device Manager, it shows an exclamation point on the management engine intel, showing a status_device_power_failure error. See my screen below Cap

    I have updated my machine, can not help

    I ran the diagnostic test at the start, no problem

    I format and reinstall a new 8.1 victory, still a problem

    installed the latest firmware, bios, drivers shown on the dell support page, no luck.

    management engine intel installed provided by intel, does not work neither.

    Seems this product only is not supported in my region (HK) yet, I can't find any local support to help me.

    Help, please. Thank you ~ ~ ~

    Hi heeae,

    Please repost this in the mobile forum for faster assistance.

    http://en.community.Dell.com/support-forums/mobile-devices/

  • Reference Dell place 11 Pro - Dell Netready (HSPA +) with O2 sim card

    Hello everyone

    I would buy a Dell coming Pro 11 but it is essential for me, the presence of a cellular modem (3G / HSPA +) to connect whenever I want, without a wireless point.

    The Italian Web site Dell offers two solutions: one "for businesses" with a wireless Dell 5570E network (3G / HSPA +) cellular modem and the other "for the home" with a Dell Netready (HSPA +) with cellular modem (model CNV1M02) O2 sim card. Since I'm a soldier without VAT, I don't think I could buy the solution for companies (am I?), so I have to buy the one with O2 sim card.

    What I would like to ask is:

    (1) what is the difference between the two cellular modem? They have different performance?

    (2) if I buy the one with O2 sim card, I will be able to use the cellular modem with a different sim card (O2 is quite exspensive) or is the SIM blocked somehow (hardware or software)?

    Thank you very much

    Best regards

    There is no difference between Dell Netready with sim card O2 and Dell Wireless 5570E. Tablet using 5570E HSPA + / 3 G modem and it did not all simlock. I ordered V11 Atom with Dell Netready, and now I use with several mobile internet providers (Poland).

  • Windows 8 Pro - Dell V715w AIO printer problems

    My Dell V715w AIO printer worked well in Window 7 64 bit as well as 64-bit Windows 8 Preview of consumer.

    Why it is no longer supported under window 8 Pro?
    Workaround solution-
    Run Setup.exe in the folder of Dell which excerpts from Installer (C:\DELL\drivers\V715w) using "Troubleshoot compatibility".
    Choose: "troubleshooting program"-> "the program worked in an earlier version of Windows"-> "Windows 7"
  • Place blue screen 5830 Pro 8

    12 times the same error.

    Error: Driver 'Intel (r) imaging signal processor 2400' (C:\Windows\system32\drivers\camera.sys) seems to have caused the system to Crash.

    I have completed all the tasks and with blue screen error still occur each tooth that I try to use the camera.

    How do I fix this error?

    I tried to uninstall the camera and reinstall but that seems impossible

    Hello I had the same problem yesterday. This happened whenever I tried to use Skype.

    I fixed it this way:

    Go to control panel-> system control-> device manager

    Find the driver Intel (r) imaging signal processor 2400.

    Right-click-> Unistall and then delete the driver.

    Check Windows Update and install all important updates

    And finally restart the tablet.

    Windows installs the driver for the webcam again.

    This work for me, do it in this order. Good luck

  • Miracast pro Dell place 8 question

    I have a little android TV Stick MK808B that has a program WifiDisplay, which should act as a display for Miracast, I have an Asus android tablet that works with Miracast on and the screen of the Tablet is on my TV, but the custom of Dell connect, are there differences between the Miracast Android and Windows Miracast?

    The MK8088 connect an Android system only.

  • Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

    Thank you for taking your time looking in my question.

    My Machine: Macbook Pro retina no Mid 2012

    What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

    My problem: everything works fine, but no sound. Drivers seem to be the cause:


    How I installed windows:

    1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

    2. Windows disk initialized and installed windows 8.1 64-bit without errors

    3 install the drivers for bootcamp support

    4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

    5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

    What I tried (all of the following are ineffective):

    1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

    2 reinstall the realtek drivers

    3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

    4 uninstallation of controller high definition Audio (it always seems to come back)

    5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

    I get the following error:

    6. place the ssd of windows in the main Bay

    7 troubleshooting sound (a 99% sure that this would not work)

    8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

    That I need clarification on:

    I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

    What I need instructions on:

    Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

    Thanks a lot again for your time and help!

    Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

    If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

  • Satellite R20 - Memory Stick PRO Duo problem

    I looked and saw a lot of similar posts from users with a similar problem. Unfortunately, most of the answers suggested by looking at the user manual and taking note that the phone does not support the Memory Stick PRO Duo. Technically, that's true. However, many Sony cameras come with an adapter that turns the PRO Duo stick a Memory Stick PRO. These include very well in Flash Media Bridge adapter. The manual also indicates that the drive supports this stick.

    What's weird, is that Windows Vista recognizes the insertion of the memory stick, but he then told me that I need to format it before so I can use it. I don't remember what I used the term, but there was a time eventually (with an older driver and/or the installation of XP?) when I could operate using a tip of reboot or something. No, however, I get boor. The stick (and its adapter) work very well. I can read it using another USB adapter. (Connected to my dell monitor 24 "... so not exactly a portable solution)

    My laptop is the Satellite R20 Tablet and my OS is Vista Business

    Thanks in advance for your help.

    -Michael

    Duo cards have been gradually were they not? I'm sure that the Duo do not support Toshiba laptops. The only solution is a USB adapter, preferably a compact.

Maybe you are looking for