Place the data of multiple channels in the tables

Similar Questions

• Is it possible to place the table and the text online?

  Hi all

  I have a table need to align with the numbered list. Is it possible in line of the table and text on a single line. EX: 6.12 and top of the 'text' must align horizontally.

  See the screenshot of the problem.

  Currently what I do, it is to place the table in separate frame and place it online using the option of the anchor.

  

  Thanks in advance.

  Kasi

  We could use the options for text blocks to position the first line.
  Fixed value set to 0.

  And a table style that would govern the distance before and after a table.
  If you wish, set both values to 0 .

  We could also do a minimum in the lead with the paragraph formatting to separate paragraph following with the next table.

  

  

  

  Best,
  Uwe

• Tracing and recording of data from multiple channels (and tasks)

  I have two modules in a CompactDAQ chassis:

  -NI 9213 (TC 16 channels)

  -NI 9203 (8 current)

  I'm using LabVIEW 11, data acquisition both of the modules without problem. I am, however, having trouble with the tracing and recording of data. Is there a method to combine the tables 1 d of waveforms from each of the two tasks, so that a waveform chart can accept? In the same way, I can write them to the same PDM or the file lvm?

  The tasks use the same synchronization settings, which shouldn't be a problem. It is 1 to 10 Hz, so I have no major concerns regarding performance.

  I'm new to the Forum, so I apologize for any misstep in terms of etiquite. Thanks in advance for the help.

  I might be misunderstanding your question, but why can't you just use the 'build' array function to combine your two bays of waveform?  Click on 'build array' and select 'Concatenate' to add one table on the other.

  

• write data to multiple channels.

  Hi all

  I have a problem with writing the data to a file.

  I'm writing a unique 2D array (containing 3 different signals) in a file LVM.

  but for some reason, data is stored as three samples of a channel, I have not been able to put it so that it divides the data into three different channels. Someone an idea how can I spend it?

  The incoming 2D table seems good.

  Thank you very much in advance,

  Keksbold

  Assumption: Each line of your data is a sequence of N samples. Your 2D array must pass through a vi "Convert Dynamic Data". Right click on "Convert a Dynamic Data.vi" and choose: 'table 2D of scalars - lines as channels.

  Or postal code if it's not useful.

• How to place outgoing files to multiple channels for a single agreement

  Hi all
  We must send the single at two different (channels) locations of the TP even HIPAA 834 document. We have unique HIPAA 834 agreement with a TP and a channel. is it possible to add both outgoing channels TP for a single TP/agreement?
  
  Thank you
  Kathar

  Hi Kathar,

  is it possible to add both outgoing channels TP for a single TP/agreement?

  A TP can have several channels, but an agreement can have only one associated channel. You can opt for the Oracle B2B here broadcast feature.

  You can read about this feature here-

  https://blogs.Oracle.com/oracleb2bgurus/entry/broadcast_feature_in_oracle_as

  Please note that this blog was written for 10g but concept and implementation is same in 11g.

  You must create two profiles TP TP even (you must use a different name/identifiers for both) and then to be part of the same group by adding identifier 'Group' in the two profiles with the same value. Middleware pass the header ' comprising:"in the name in name or an action event header.» When executing B2B will send the same message for two profiles TP.

  Kind regards
  Anuj

• Generate the table of contents with chapter markers?

  It has been a while since I had to install and create a table of contents for a long document of single file, but I'm sure that I created TOCs in this way in the past. Then, why the text in the Section markers will appear in the table of contents? It is even possible to generate a table of contents that contains text of article marker?

  I use InDesign CS5 in Windows. I have a file single document I'm trying to generate a table of contents for. I designed a 16-page manual in an inDesign file that includes a cover page, table of contents page and seven "chapters."

  I created a separate section for each 'chapter' and used Chapter markers in the top of the page master for chapter names. It's something I did in the past of syntactically long documents containing several chapters.

  I put the first page of each 'chapter' as a new Section on the Pages panel. In numbering and Section Options for each page, I checked the Section getting started, Automatic Page numbering, the Style of Page numbering: 1,2,3,4... and in Section marker: I put the name of 'chapter' in the text box.

  

  I've set up paragraph and character Styles and has used throughout my document. When I put in place the table of contents I created everything correctly, including a heading style that I used for all the sub lines in my file and my style of Section marker for chapter names.

  

  When I insert the table of contents, generate headers sub with their page numbers, but the titles of the chapters which are chapter markers do not generate. Am I missing something or is it still possible to enter the text of chapter markers in a table of contents? I'm sure that he's worked in the past. Can anyone offer a solution for this?

  Thank you

  Kat

  Looks like the markers section present only in the table of contents if they are on a document page. Try manually to the substitution of the frame.

• [CS5 Server/JSX] Generate the table of contents at the beginning of the document

  Hello

  The following script generates a table of contents:

  
    myTOCStyle = myDocument.tocStyles.itemByName("TOC");
    myMasterSpread = myDocument.masterSpreads.item("A-Master");
    myTocPage = myDocument.pages.add(LocationOptions.AT_BEGINNING, myMasterSpread);
    myIndexFrame = myDocument.textFrames.lastItem();
    myBounds = myIndexFrame.geometricBounds;
    myX1 = myBounds[1];
    myY1 = myBounds[0];
    myDocument.createTOC(myTOCStyle, true, undefined, [myX1, myY1]);
  
  

  When I run this Script on the InDesign CS5 server, it generates a table of contents, but it is not placed on the page just added at the beginning. It is placed on the first page containing the content where the table of contents is generated from. Also the added page at the beginning does not contain the elements of the master page, it's just a page of blanco.

  When I run this Script on InDesign CS5 to office, the table of contents are placed on the first page added with this script. Also, does this page contain master page items!

  How is it possible to place the table of contents (with overflow text) before the first page containing the content. The page that contains the table of contents should contain elements of the master page.

  Sjoerd

  myTextFrame = myStory[0].textContainers[0];
  

  He lacked the monarticle after [0]

• How do switch you between multiple channels to indicate which channel to acquire the data from?

  I'm trying to builld a VI where I can have an option to enable or DISABLE multiple channels depending on the modules plugged into the chassis and then acquires the data of the channels which are turned on and where other acquisition parameters do not change. Is there any specific/switch where can I do this? Please answer as soon as possible. Its quite urgent. Thank you

  You use DAQmx?  To change the assignment of the data acquisition channels, you must close the currently open session and then create a new session with the new channel definition.  So the order of execution:

  Create task or virtual channel - read - clear task of triggering and synchronization of the configuration - set new channel list and to create a task - read - clear task, etc...

• How to parse the input data of several channels simultaneously via an NI USB-6251 box by use of a single DAQ Assistant?

  I did separate VI for reading signals from several channels on a map of NI USB-6251.  I would like to combine these in a VI VI alone so that they can run that at the same time, however, there is an error if there is more that a single DAQ Assistant in the same--> error-50103 VI was held at DAQmx controls Task.vi:32 (the specified resource is reserved. The operation could not be performed as indicated.)

  All the inputs of channel must then be read in with a single DAQ Assistant, but all of the data on different channels are not separated.  Can save this data in a matrix or otherwise manageable which allow to facilitate the analysis of the data from the separate channel entries?

  I tried to view the data in a file of measures, but then when I tried InPort data, I could all the data I wanted.

  Hi AggieGirl,

  Good afternoon and I hope that your well today.

  First of all, you will not be able to have more than one DAQ Assistant by input analog or analog output task because the device has only one of each. So, you must have a DAQ task to HAVE and AO. (This is not the case for DIO static).

  There is far from split signals using the express VI - signal splitter.

  When you say you saved this file and it does not work, how it did not work? The Express VI - save a file of measures needed to manage multiple waveforms. Can send you your code & explain more about what was not OK on the file?

  

  Thank you

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• Sampling of multiple channels on the same frequency

  I have some problems to understand how to configure my cDAQ chassis.  I have a work labview program that should (I guess it doesn't!) sample 5 channels at 5 Hz each channel.  When I got the system data each analog channel (all in the same spot) resembles a ~1.xx Hz sampling.

  I created my task to taste 3 analogue to 5 Hz, 1 sample per channel.  It gives me a sample rate effectiveness of sample of 1,666 Hz per channel?  That's what seem to tell me my data.

  If the above is true, change my task to make a sample 3 channels at 15 Hz, 1 sample per channel will give me a sampling rate of efficiency of 5 Hz per channel?

  The other 2 channels are digital and on another task and appear to be working (fingers crossed!)

  Thank you and happy holidays.

  Kyle

  I can post code if this confusing issue.

  
  

• Using the procedure to display the table of multiple data

  Hi, I need help for the procedure in oracle

  I want to create the procedure to display the table of multiples with sample plan

  with a parameter imployee_id to display an employee_id, name, function, start_date, end_date

  IAM using this query to select more than one table

  SELECT e.employee_id, e.first_name, j.job_title, h.start_date, h.end_date

  E EMPLOYEES

  JOIN j jobs

  ON j.job_id = e.job_id

  JOIN the job_history:

  ON h.employee_id = e.employee_id

  WHERE e.employee_id = 200;

  Thanks for the help

  Blu and Billy showed you the 'real' solution. You can display the data returned by a cursor ref in SQL Developer, too:

  http://www.thatjeffsmith.com/archive/2011/12/SQL-Developer-tip-viewing-refcursor-output/

  Yet as a duty for a beginner is generally do not have the expected solution. Usually, teachers want to see you using a LOOP and dbms_output. something like

  DECLARE

  Xy CURSOR IS

  SELECT whatever

  As much as;

  BEGIN

  FOR r IN xy LOOP

  dbms_output.put_line (r.col1 |' # ' | r.col2);

  END LOOP;

  END;

  Of course this suggestion will inaugurate a discussion abusing DBMS output but I keep my position that it is authorized to use it for learning the basics.

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• Create the form for selecting data in multiple tables

  Hello

  I'm getting APEX for the first time and I just read 2 days dev Application Express guide

  I tried to play and I can't create a report with the form that select data from several tables

  What I want to achieve is a report we'll say 'USERS' makes MANAGER_ID ID, NAME, with a form that allows me to create, delete, change users

  The problem is that, once the report with the form created, if I click on create (to create a user) it will ask me for id, name, and manager_id

  I need a water drop down which allows me to select managers in the table manager instead of manually insert Director id

  How do I do that?

  Thank you!

  HI Chris,

  LOV will use this magic.

  Search:

  • APEX Oracle (12 of 20) tutorial - LOVs (list of values) in forms - YouTube
  • Creating lists

  Kind regards

  BEnjamin

• How to find if the data in the table are distributed on multiple disks

  Hi all
  
  I have a question on parallel processing.
  
  Assume that the Oracle (11 g 2) database is installed on a 12 CPU hardware has 24 independent labels, then I guess it's that we can have a maximum of 12 DOP.
  
  But if the table on which I use the parallel market that spans only 4 discs then the above 4 parallelism will degrade the performance of the query.
  
  My question is how do I know if the data in the table are spread over the number of disk drives, so that we can properly apply valid parallel operations on the table.
  
  Appreciate your valuable contributions here.
  
  Thank you
  MK.

  Just think logically.
  What is a table in the database? A segment.
  What is a segment made up of? Scopes.
  What is recorded on a scale? The id_fichier of the data file.

  ------------
  Sybrand Bakker
  Senior Oracle DBA