Plantronics. Headphones Stereo Audio 655 (64-Bit Solution?)

Similar Questions

• using male to 3 x female cable stereo Audio Splitter with audio output

  The HP Pavilion 22-h031ea all-in-one has an audio output on the back of the unit. Is this ok for this connect with a 6:1 with a male/3 female x audio cable with stereo Audio Splitter?

  Simmo56, welcome to the forum.

  I am not sure it will work.  However, it will not hurt anything to try it.  If this does not work, you will not be able to have 6.1 sound.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• How can I convert stereo audio to mono? Cannot find what should be easy to answer.

  Well, that's another problem of CS5 that should be easy to find a solution, but one in which I can not find the answer. I tried the forum of Soundbooth, buit got no response.

  I have a dialog box that has been recorded and is due to an error, in stereo, with the left lane containing the dialog box and the empty road. Therefore, it is not mono. It's stereo, with all the sounds on the left.

  What I want is to make this mono, of course, but do not see how in Premiere Pro and Soundbooth.

  I have CS5 Prod Prem thank you much for the help.

  fix my fault of hit of the previous post:
  You probably applied an effect to "fill right" to the track.

  How is it that the right path is always empty? I apply the effect, but the display does not informqation for track.

  You have a stereo audio track, which channel right has no information.
  You need to make sure that you do not "Fill right", this channel is empty.

  Use 'fill the left"to hear the left channel of your audio stereo.

• 5.1 (pseudo) mix stereo audio HDV

  I did a lot of research on this... and people in the forum still helped me to find a way to make my mixing 5.1 on a Blu - Ray disc.

  But now I have a problem of mounting...

  I used the Adobe tutorial on how to set up a 5.1 sequence... I install a new 5.1 master sequence and he said I want 6 5.1 channels.  I then copied the same audio track to each of the 6 channels in the project window.  If I use submix channels, I assume that you do not get the rear washer by the tutorial so I need 6 masters?  It is clear that you choose 5.1, but not so clear on if you import audio stereo, how master and mixing of tracks for the installation program.

  I want to take my stereo mix and 'it' through the soundstage 5.1. I know that's not true 5.1, but I don't like.  I did it with any NLE and if the rear channels are low, it offers a nice mix.

  I think Miss me some steps... I have to separate my audio captured HDV stereo mono or just leave it as stereo?

  And despite everything, once I had my 6-channel and moved the washers autour, he didn't was out 5.1 to my PC speaker system.  It is an installation 5.1 with a Creative X - FI titanium sound card.  I get 5.1 when my other NLE editing.

  I have read all the help files on the choice of my hardware audio audio betweem of WDM and ASIO creative.  However no choice gives me my rear speakers when editing audio.

  I can read that I need to configure my output audio mapping... and I need 'Tileslide the channel of the sequence desired in compliance with the material in the list channel.'  However, I don't have speakers appears twice... and they appear on the left and right... Even though I have 6 audio channels in the sequence and a map 5.1 sound and the configuration speakers.

  The questions are:

  (1) what should I change to hear 5.1 audio when editing.

  (2) for what I'm trying to do, should I split my audio captured in mono channels or leave the stereo form.

  (3) how can I configure my 5.1 sequence in order to achieve my goal.

  I apologize if this is something simple.  I did the reading and research and can not make it work...

  I feel I'm close enough to be able to make the transition to the much more powerful tool.  The video part is quite simple.  However, I have questions on the audio portion.

  If it's CS4 and a question of photo, I could probably answer!

  Thank you

  BJBBJB1

  OK, I am correct that you have one 2-channel (dual mono or stereo) Audio source stream?

  I would create a project/sequence with a 5.1 master and two stereo Audio tracks. Place an instance of the element 2 channels on each of the two Audio tracks. Now, in the Audio Mixer Panel, locate the two Clips on the "sound stage" with the washers for each Audio track.

  I would use the central channel on the first switch (Audio track 1) increase the supply of the center channel a bit, but leave the zero value in the Clip on 2 Audio tracks. I would like to add some of the Audio Track 1 power to the LFE input, but not too much.

  Now add stereo Audio Effects > Reverb and Delay on the Clip audio track 2 and probably he alleviate a few dB down from the level 1 Audio track. Experiment with the settings on these two effects.

  PrPro does not allow the pure creation of the LFE channel, but you can do it at the hearing, if you use 6 discrete channels sources in a multi-track Edit. I use it to create DTS streams, to be used as additional streams in yet.

  This should help you good fake 5.1. Now, you should export this way SurCode DD 5.1 SS plugin. There is an entire article about the conduct of a "poor DD 5.1 SS", but I never tried, as I SurCode DD 5.1 SS plugin, as well as the SurCode DTS encoder. I'll get this older article.

  Good luck

  Hunt

• Premiere Pro CC: Of Keyframing Dual-mono (stereo) Audio

  Hi all

  OK, well, the title of example I have of is from 1 to 2 stereo audio source, recorded and 1 voice is music.

  In this case, my sequence is prepared as mono tracks and when this happens, I'll have 4 audio layers in sequence.

  -time passed and changes are made-

  and it's time to do the audio balance. When I add a keyframe, it only affects only one channel of the layer, not the two channels at the same time.

  How do I change the preferences to keyframe so it will have an impact on the L & R channel on dual mono source (stereo)?

  Thank you

  H

  -howie @ goasean. com-

  How can I change the preferences to keyframe so it will have an impact on both L & R channels?

  Place a stereo clip in a stereo track.

  Apart from that, you can't.

• How export a project consisting of 2 video tracks with many clips/effects and 1 stereo audio track so that the project can be worked into another compatible editing system?

  How do I export a project composed of 2 video tracks with many clips/effects more 1 stereo audio followed that project ACR is still worked in a

  
  

  compatible mounting system? Thank you!!

  When you export, you create a new video file that will have effects applied... in other words, a book finished

  Of course, this video 'complete' may be edited by someone else on another computer... but it SEEMS to me that what you want is for someone to take your editing, continue editing, THEN export a finished video

  Is this correct?

  If so, do some reading in the help file on the Manager project, so you can put your project and all files on an external drive to give to any other person

• How can I set up stereo audio tracks as default in first using the ProRes 422 codec?

  Forgive me if this has been asked several times before. I searched but can't find anything that explained in a language that does not require a degree in computer engineering.

  I'm a new convert to our beloved FCP 7. I'm learning to love dear first - but the audio part of this is driving me crazy.

  I exported from FCP files as ProRes 422 movies with stereo audio tracks. I want to put first in the same way. But when I do it all crashed in a single audio file.

  It plays havoc with the Pan - especially in mixtures which have a mix of stereo music. Apart from this it just confuses me.

  Also. When I create a new project from scratch in the first and I select the custom ProRes 422, this setting doesn't allow to ProRes 422 audio mono. I don't see a codec for something else (ie. stereo).

  Am I missing something?

  I looked in all areas of preferences and can not find anywhere to change this. I just want to import audio data from simple, basic two-lane (and let appear the same) that I would be in FCP, ProTools and the myriad of other editing programs that I use.

  I also want to be able to set up a base of two-way stereo timeline/sequence without having to reinvent the wheel.

  Thanks a lot for all the help and patience. I'm slowly pulling my hair and spend long periods sitting in the corner, hugging my knees and crying.

  My characteristics. Preferred codec installation: ProRes 422 codec

  First pro version CS6 (6.05)

  Thanks again.

  In the project Panel, select all the clips and rightclick/change/audio channels.

  Set it to 2 tack and mono.

  When you drop the clip on the timeline the stereo turns on two tracks.

  You can also set by default in the preferences under Audio (before you import the clips) (stereo to mono).

• How to convert a stereo audio chanel in mono?

  Hello

  I have to work on a project of CS5 with stereo audio in the timeline panel (and it is too late to import it back the file and choose to split the mono 2 stereo). On chanel, left, I have no sound and on chanel R. If I put the command of IBC, on the left, how to assign right AND left in the master? How to convert a mono 2 stereo audio file in hearing?

  Thanks for your help,

  Olivier Madar

  Use the left or right audio effects fill fill, depending on which channel contains the audio you want to duplicate. You can use these effects to the clip level, since the effects bin, or you can select and use them in the stack of effects in the mixer Audio Panel for a particular track. The video effects allow you to isolate individual items, of course, while track effects will affect the entire track.

• Audio problem and possible solution, probook 4530 s, Windows 7 64 bit

  Here is my variation on the theme "no audio".

  This laptop was purchased in early July 2012 has worked well for a few days, then there was no audio output at all - no speakers or headphones via browser, iTunes or any other application.  In Device Manager, I noticed there are two separate features in the 'audio controllers, video and game.  We're "IDT high definition audio CODEC" and the other is simply "high definition Audio Device."

  I searched this forum and tried many suggestions, including the update of the BIOS, driver uninstall/re-install and restore drivers - no luck.  Sometimes I'd get audio, sometimes not.  Now I have disabled the "high definition Audio Device" and this seems to have solved the problem.  I was doing an audio output for the last 24 hours, even after sleep and restarts.

  My question is this: can I just uninstall the "high definition Audio Device?"   This seems to be the origin of the conflict.

  Thanks for your help.

  You have a great day too, Howard.

  You can click on any post feel you better solved the problem. IMO, you pretty much solved yourself with your first message.

  I have to tell you what was the other audio device.

  Just click the box "Accept as Solution" black at the bottom right of any post.

  Best regards

  Paul

• Yoga Tablet 2 (1051F) Audio Feedback/noise/no headphone jack, see below for the Solution

  Moved the topic below for a response to be able to mark as solution.

  Kind regards

  Dave

  Just something that can help others - I recently Preview in the BIOS and disabled startup secured, as well as activate debugging USB in an effort to solve my problem of not being able to recharge the Tablet by simultaneously connecting USB OTG devices. Not had any effect how to solve this problem, but instead introduces another problem.

  After that, I lost all the sound elements of the headphone plug - instead, I have only heard comments and interferences.

  I suspect that this fact was to activate a data output that technicians headphone plug type can use to debug and diagnose problems.

  in any case, enable USB debugging and secure boot back to the restored factory settings taken feature helmet.

  So thought I would share since you are defintiely is going to get help from Lenovo intellect on this stuff.

• Satellite M40 - 142, stereo audio input

  I can 'stereo' record through the microphone in Satellite M40 - 142?
  It is possible to have a line-input/output stereo or mono only?

  Hello

  As far as I know the line output (headphone jack) allows the connection of stereo headphones (16 Ohm min.) or a different audio output device. When you connect headphones, the internal speaker is automatically disabled. The input line (Jack Microphone) allows to connect a monaural microphone or other audio input device.

  Good bye

• Can't separate the headphones and audio speaker

  Hello

  You just bought a new Acer (E5 - 571G) E15. It works fine, but in my daily life, I have to use headphones a lot (I use any laptop speakers).

  But no matter how hard I try, its just so many speakers and the headphones.

  I have the latest Realtek HD audio drivers. Realtek recognizes when a device is plugged into the audio jack, but still, under devices 'playback', there is only one option - speakers.

  Running Windows 10, Build 10162. The headset works fine on another laptop with the same build.

  This is my last resort, please! I don't want to void the warranty by opening manually and by disabling the laptop speakers.

  I would try to install the last 2.79 Realtek Realtek Web site:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownT...

  Check "I accept...". »

  then choose 32 or 64 bit driver, uninstall your Realtek drivers and then install a new one.

• Configuration of the Beats of Dre headphones with windows 7 64 bit

  I have configured my beat by Dre wireless with bluetooth via bluethoot logitech peripheral and its asking me to install the drivers for the headphones, I looked everywhere but could not find these drivers, is there a solution for this? Im running Windows 7 64 bit

  I think this is the driver that I used.

  https://www.dropbox.com/s/nmt9n1l6eh408mk/Bluetooth_Broadcom_V7a_6.2.1.500.zip
  to solve the problem. I would like to know if it works.

• Unable to play Turtle Beach headphones like Audio device by default

  I recently bought a HP Pavilion dv6 Notebook and, so far, have had no problems. I use Steam chat to speak to my friends while playing PC games. My cat of steam in my Turtle Beach headphones without problem, however, his game will play only through my speakers. I guess the problem is that my helmet is not defined as audio device by default. When I tried to put my headset as default device, I was unable to do so. I was wondering if anyone knew a solution to this problem or could offer any assistance whatsoever.

  My OS is Windows 7.
  I reinstalled the sound drivers and you have run also the resolution of the Audio playback problems, which were the solutions that I found on this forum. None of them helped me to put my headset as default device.
  Thank you!

  Hello

  Let us know if the headset works perfectly in another computer.

  Also check out the following link.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• How to stream stereo audio left side clip?

  Hello

  I use audio of an old clip where the audio is way out of balance to the left. In old FCP, I think I could put the saucepan to 01 and he got out stereo.

  How can I get audio in FCPX?

  The best

  Elmer

  This is a stereo component?

  Select in the timeline. Go to the Audio Inspector, in the change from stereo to mono dual channel configuration. Now, you have access and controls on individual tracks. Uh, I don't think you can ever go back to a stereo clip, however, so try this on a copy of the clip problem first.