Playback audio monitoring with native SDK 2.1

Similar Questions

• Backward compatibility of Native SDK 2.0 app?

  Hi, I've recently compiled my application with Native SDK 2.0 beta 2 and his work now uses the Beta firmware 2.0 OS, but when I try to run it on pre 2.0 firmware like 1.0.8.1971 its gives me the following error:

  result::failure 533 system request - requires: forbidden version, want (2, 0, 0, 0) (1, 0, 8, 1971)

  I found the tag on xml and tried to change it to 1.0.0.0 and it can be installed, but it crashes immediately after I try to open it.

  Anyone know how this works?, or if there is no official information about this that I'm missing?

  When you submit the app at AppWorld you should have a choice to define minimum OS version, which would limit what versions of your app people would see

• Cannot compile the sample applications with the native SDK BB10

  Hello

  I downloaded the BB10 (10.0.4) native SDK and the sample application pack. However, some of the sample apps fail to compile (AudioControl and BelligerentBlocks, for example). The target isn't the playbook (Simulator).

  I get an error do the following:

  make [2]: * [C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7/AudioControl] error 1
  make [1]: * [all] error 2
  make: * [all] error 2

  Looking at the newspapers of generation, I receive the following linker error:

  'C:/ndk-10.0.4-workspace/AudioControl/arm/o.le-v7 '.
  C:\bbndk-10.0.4-beta\host\win32\x86\usr\bin\ntoarm-ld: Notes: 'screen_get_window_property_pv' is defined in DSO C:/bbndk-10.0.4-beta/target/qnx6/armle-v7/usr/lib/libscreen.so.1 try so add to the linker command line
  make [1]:

  Am I missing something obvious? I'm competely new to makefiles, so if anyone has a suggestion, it would be welcome.

  Thank you.

  The latest NDK for Playbook is available from: //developer.blackberry.com/native/download/

  For waterfalls NDK 10.0.4, follow the instructions in Momentics content/getting started/Getting Started Guide Help/help / install and set up the Simulator

• His monitor with built-in speakers

  Hello
  I have an Optiquest Q7 monitor with built-in speakers.  I used to get a sound from the built-in speakers with my XP computer.  I recently upgraded to a computer with Vista 64 bit.  However, I no longer get sound through the built-in speakers.  I tried to sound in the control panel and disabled the exclusive mode in the Advanced Options tab.  Any thoughts on what may be the problem?
  Thanks in advance,
  Eco

  Hi EaswarS,

  Welcome to the Microsoft Answers site!

  First check if the internal PC speaker has by default.

  1. click on Start, type Sound in the search field and select Sound from the list when it becomes available

  2. check that the device audio speakers is set as the default device and is activated

  NOTE: If the audio peripheral speakers isn't in the list, right-click anywhere on the playback of the Audio window tab, then select options Show disconnected devices and Show disabled devices .

  3. If the sound from speakers option is disabled, right click on speakersand then select Activate .

  The sound should now be restored. If the device audio speakers still does not work properly, check if the audio device is enabled in the Device Manager.

  Step 2: Check if the audio device is enabled in the Device Manager

  If there is no sound from the speakers, follow the steps below to determine the State of the sound hardware in Device Manager.

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on audio, video and game controllers to expand the list of audio devices installed on the computer.

  4. determine if the audio device in question is enabled or disabled.

  ·         If an arrow appears on the volume icon, the audio device is disabled. Go to the audio driver update.

  ·          If a down arrow is not displayed on the volume icon, the audio device is turned on. Go to verify that the audio device is enabled in the Device Manager.

  5. right click on the name of the audio device and then click Activate. If the problem persists, then follow step 6.

  6. right click on the device name, select Propertiesand then displays the message in the device status field. The device status field contains either:

  A message that contains most troubleshooting for your specific device information.

  Or

  A message indicating that the device is functioning properly.

  Step 3: Install an updated audio driver

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on sound, video and game in the Device Manager window controllers.

  3. right click on the name of the audio device listed under sound, video and game controllersand then click Update driver software.

  You can also visit the manufacturer's Web site and download the latest 64 bit Vista compatible drivers.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Double connection monitor with HP H8 - 1360T

  Just got a new HP H8 - 1360T with a Radeon HD7570 video card. I have two monitors with DVI and VGA inputs on them. They were both used with an older Dell dual mode. Unfortunately the double with the Dell adapter cable has a male end LFH59 (all pins) that will not connect the HP H8 - 1360T.  Is it as simple as getting the right cable? I see some references/DVI-I single and double as well as DVI - D single and double. I want to extend my desktop on two monitors. Can what adapter cable I get? Thanks for your help.

  Hello

  You said that the monitors DVI so use a native DVI cable to a monitor, and then a DVI cable to HDMI to the other monitor.

  To eliminate any problems check each monitor, one at a time on each port to make sure everything works before moving on to the next step.

  Go to the AMD Catalyst Control Center and set up a display EyeFinity group.  You should be put in place a group of 2 X 1.

  If necessary, go to the AMD web siteand download the latest driver for your video card video card.

• Monitors with speakers?

  One of the HP monitors have loudspeakers built-in and audio output ports that can connect to external speakers?

  Hello

  Check this box:

  http://www.NexTag.com/HP-monitors-with-built-in-speakers/products-HTML

  I think not only considered the monitor speakers is a good idea, you need many cables aound except pass by wireless. Just buy a monitor with speakers builtin (many brands autour).

  Kind regards.

• How to use two external monitors with my laptop?

  I have a new Pavilion dm4-301 d cl Entertainment PC.   My OS is Windows 7.   I'm used to using two external monitors with a docking station.   This new laptop lacks a docking station.  What should I do use two external monitors?

  Certainly not without a dock, but even with laptop HP well enough docks limit you to one of the ports on the external monitor, even if there are two on the dock. We used a device called an Atlona AT-HDPIX2 which is a USB to hdmi adapter. It provides a feature of third monitor for a laptop... use the native external port of the screen and the computer screen internal, then this device gives a third control that is fully configurable to display Windows 7 interface... clone, extend, etc.. It allows a full HD resolution and is pretty responsive for games even light.  HP does not have any true docking station for your laptop.

• Native SDK and Simulator

  Hi all

  I have a problem. I can not connect the Simulator to BB10 native SDK. I opened the Simulator with vmware closed player.i wifi on Simulator. and I opened bb10 native sdk but the sdk does not discover/find it.

  How can I solve this problem?

  Best regards.

  Hello

  If you have problems with the Simulator in auto discover then the best way is to enter the IP address manually.

  This is how you do it.

  (1) on the MenuBar at the top of the Simulator, you see an icon between the time and date and the lock icon of orientation that resembles a head and shoulders with a gear wheel in the middle. Clicking on this will show you the State of development - make sure that the mode of development and save the specified IP address.

  (2) on Momentics go to the Perspective of System QNX (icon in the top right corner) and right-click on the sim card, select Properties. Enter the IP address.

  (3) after entering IP address, right-click sim again and select Connect. This should change the localhost not connected sim card just localhost and you should be good to go.

  Please let me know if it solves your problem.

  Graham

• BlackBerry tablet OS native sdk, should I use it?

  Hello

  I am an experienced C/C++ developer, but have no experience with BlackBerry.

  I wonder do the research as evidence of the application of the concept on BlackBerry.

  (1) is the native SDK for platform able to target BlackBerry non-tablettes BlackBerry Tablet OS?

  (2) where to find some QAnywhere to the APDU commands Exchange with the jury on SIM card?

  Thank you

  WebWorks is the only supported way to target all phones.

  Another option would be to support a Java application with a base of code designed to target older phones of the BB as the Android player, BB10 taking place.

• 10.1 beta (10.1.0.807) native SDK update fails

  Help!

  just uninstall 10.1 beta 1 and installed 10.1 Beta 2

  now I'm having

  10.1.0.807 SDK

  as next I wanted to add all the SDK I need to develop and deploy 10.0 apps

  so I clicked on "Update of the native SDK" - but the list is EMPTY

  It worked with Beta 1 and now I'm lost

  

  It still does not for me.

  but I've found a workaround:

  in my previous installation (thanks to osx timemachine), I copied the files and folders selected in the installation of the beta 2 release:

  

  now I can use these old SDKs inside the IDE of Beta2

  It seems that the Momentics IDE simply scans the folder bbndk for bbndk_env_xxx.sh files and need the corresponding host and target files.

• How to create audio monitor in flash

  Hello everyone must help to to make an audio monitor ...

  
  it is very important! homework!
  
  Thank you...
  
  
  I want to le image functions of work...

  

  http://code.tutsplus.com/articles/render-an-MP3-audio-spectrum-in-Flash-with-computespectr UH - active-10808

• Playback - audio stuttering, lag, drop-off

  Hey guys, sorry for the long spam of which is downstairs, but it really drives me crazy, and I want to remedy. Any help would be appreciated. I've included all the information that would be necessary and I am very competent with computers (programming, technology, etc.)

  Questions:

  (1) reading in the overview section is stuttery after awhile, and audio out *.

  (2) adding video files causes the complete user interface to hang in Explorer.exe and Premiere Pro window *.

  * Present in all projects

  Temporary solution:

  (1) where the resolution of the reading is 1/2, to order in full, waiting for the resolution of the image in pause increase allows the video to play gently for a few seconds

  (2) none found

  System Specs:

  1 x 250 GB 840 Evo SSD <-where first is installed

  1 x 3 TB WD Green Drive <-where are stored the clips

  1 x 1 TB Seagate 64 MB Cache 7200 RPM disk <-unused, but no change in performance when used

  Video clips:

  80 GB, 160 GB, H264, 30 fps, saved with OBS 450000 max bitrate value

  System Specs:

  i5 4440 w / cooling stock

  16 GB of RAM - 1600 MHz

  Card mother B85-more

  GTX 970 Strix Gaming

  Windows 64 bit 8.1 <-a was installed as 8.1 on the Assembly of the computer

  -SETTINGS ADOBE-

  Project settings: Mercury Playback Engine GPU acceleration

  Video display format - Timecode

  Audio display format - Audio samples

  Capture HDV - Format

  MEDIA

  _____________________

  Media Cache files: save media cache files next to the originals when possible - disabled

  Location is on the 1 TB drive - %appdata%\Roaming\Adobe\Common

  Media cache database:

  Location is located on %appdata%\Roaming\Adobe\Common drive 1 TB

  Media for a period indeterminate Timebase - compensated image 29.97 FPS

  Timecode: use a media Source

  Number of images: start at 0

  Write ID XMP files when importing - disabled

  Write the clip markers to XMP - verified

  Active clip and controlled linking - XMP metadata

  Include captions on Import - verified

  The files more

  Automatically refresh files - audited more

  Refresh seconds more files Every [60]

  MEMORY

  __________________

  Installed RAM: 15.9 GB

  For other applications of RAM: 4 GB

  Rendering optimized for [Performance]

  READING

  ____________

  Preroll seconds [3]

  Second Postroll [2]

  Step backward/number of seconds [5]

  Activate the issuance of mercury - verified

  Audio device [Adobe DV]

  -OPEN DIFFUSER SOFTWARE SETTINGS-

  Encoding

  ______________

  Video encoding:

  Encoder [x 264]

  Use CBR - verified

  Enable the padding of CBR - verified

  Flow rate Max (KB/s) [450000]

  Audio encoding:

  Codec [AAFC]

  Bitrate [320]

  Format [48 kHz]

  Channel [stereo]

  Version of the driver NVIDIA - 347.09

  Objective:

  Blocking interface cure when you add files/changes of clips

  Smooth to prevent playback audio and video, choppy playback / gal (drops to 0.5 ips)

  I can save it if you want, but it will take some time.

  Could be caused by:

  • Relatively slow 4-core CPU without HT
  • Only 16 GB of memory
  • EVO slow, SSD, especially in writing
  • Using a GREEN drive, which is a curse on any mounting system
  • Lack of tuning
  • No no not the Intel video chip is disabled in the BIOS

• Audio support Android natively?

  Hi Neil, audio of the native Viewer will be resolved with the V31 version next month?

  (Branched out in a new discussion because it was a response to another topic)

  I hope to have an initial implementation available in little more than a week. It will not support files custom controller or the background sound, but the rest should work. If it is the version that is due in a little more than a week depends on how the test is going.

  Neil

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading