PlayBook of blackBerry Smartphones does not connect to the WiFi PRIV "hot spot"

BlackBerry PB does not connect to the WiFi PRIV "hot spot". Implements immediately with an android tablet based - Hudl of Tesco UK - but the PB comes not to connect to the private. Reading through various bulletins and cannot find anything obvious that I missed. PB connects to the other wifi fine.

Sorted. And so simple. Just changed PRIVATE WiFi "hot spot" to 5 GHz. thanks to Bruce using BlackBerry.

Tags: BlackBerry for Android

Similar Questions

  • BlackBerry smartphones does not connect to the Device Manager after upgrade [USB]

    Hello

    I've updated de.141.151 and just after the update has been made, whenever I try to connect my BB via USB, I get the message says:

    "Unrecognized USB device".
    The USB devices for computer mark attaached has malufunctioned and windows does not recognize it. "

    I tried cutting things:

    -Restart of BB

    -Restart the PC

    -Repair the current installation of Desktop Manager

    -Restore an older version of the Desktop Manager version

    PS: it is not unknown devices in the 'Device Manager' of the pc so there is nothing to uninstall and reinstall

    All are taken out with no results,

    any suggestions?

    Thank you.

    Found the solution, remove the battery after the closure of the DM, connect the usb cable and then replace the battery, the pc will read it.

  • Email to blackBerry Smartphones does not connect via the new operating system

    Once I downloaded the new OS, my email has stopped working.  It is no longer that receives or sends emails via my Mobile network.  If I turn on the Wi - Fi and connect to a Wi - Fi network, then the email receives and sends.  I don't want it to be connected to a WiFi nothing to do with the e-mail.   How can I get it to work on any Mobile network like it used to?

    On your BlackBerry device, go to:

    1. options > advanced > host Routing Table > Menu > register.

    2 send your service from your carrier's BIS site books:
    Of your handheld: http://www.blackberry.com/btsc/KB15402

    Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

    Your desktop PC: http://www.blackberry.com/btsc/KB02830
    North American carriers - scroll down to select your carrier
    Carriers worldwide - find your operator from the list

    3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

  • BlackBerry smartphones could not connect to the WiFi system at home - "unable to get an IP address.

    Like many of you, I have WiFi connection problems with my new BB9700.

    When I'm out of the House, I can see my BB, find local WiFI hotspots and I can connect to them immediately.

    However, when I get home, my BB doesn't connect to my WiFi, return the following error message:

    Unable to connect

    Reason: Could not obtain an IP address

    I downloaded the latest version of the software BB (now running version 5.0.0.351), cold all started in view (router, telephone, coffee table and the cat) but still the same error. My foot pain, the cat is not about me and I still can't connect to the House! Of course, my carrier connection works perfectly like their outrageous fees structure... (They are 3G or Hutchinson Telecom under a different name).

    My WiFi access provider (PCCW / HK Netvigator) checked my system configuration and report that everything works correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the guy from the hotline can see when I connect each of them to the system.

    I tried different combinations of switching the usual options on and off on the BB but always get a connection.

    SO, any of you kind of people you have a solution other than the cat suddenly once again?

    Thanks in advance,

    RS. HK.

    Dear Mike,

    I basically solved this issue will me a LOT of searching.

    Step 1.

    Router

    MAC address of my Blackberry 9700 has added to the list of MAC access on my router configuration. (Subject to the router to save settings)

    Step 2.

    Router

    Reset the Security Type on router configuration None (presented to the router to save settings)

    Step 3.

    BlackBerry Bold 9700

    Delete the profile of my WiFi at home in the WiFi Options

    Step 4.

    BlackBerry Bold 9700

    Reentry into the profile of my WiFi at home in WiFi Configuration

    WiFi in the House. SUCCESS AT LAST!

    Step 5.

    BlackBerry Bold 9700

    In manage connections, unchecked Mobile Network (i.e. Off and No Way can connect to my 3G service provider)

    Step 6.

    Turn off the Blackberry Bold 9700.

    Battery pull.

    Restart the Blackberry Bold 9700.

    The House immediately found of WiFi Internet and all other functions working perfectly.

    Only problem is now my home network is unsecured. (Can't get the IP address if WEP security is enabled)

    So it's all good now and forward it to someone else who has the same problem.

    Happy Chinese new year!

    Rick

    Hong Kong

  • BlackBerry smartphones can not CONNECT to THE SERVER

    Hello need help. My Blackberry Curve 8520 (OS 5.0.0.1036) does not connect to the server. It shows my network (Vodafone) and gets a strong signal; makes and receives calls; connect wifi; but it is also completely static. After the first Setup email screen I get: your device has a connection to the server problm.  (I think it means the Blackberry server?)  So I can not connect any email.  Very well in my other near-identical Curve 8520 Sim Card work.  How can I do please?  Y at - it a reset or software update is complete I can undertake? Thank you, Michael

    I can help you with the it policy... lack of procedure for access to the BES server, this (and only this) cleanse a BB to an it policy:

    • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    If you do a backup/restore, don't do this basically... rather, backup/restore only the databases specific you need (for example, calendar, contacts, messages, etc.) and more precisely to avoid data bases having something to with COMPUTER policy, business, etc.. If you restore those, the it policy will be conscientiously restored to the device, and you will be right where you are now.

    As for a BES Server trying to reach out... There is nothing that I can offer you. Your best bet is to talk to your provider and make sure you have no BES-level service enabled on your account of them. Who should (note 'should'... is there no guarantees) prevent a BES server to reach out and the reactivation of your device.

    Good luck!

  • HP Deskjet 3055 A does not connect to the WIFI with security

    I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

    First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

    My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

    I restarted my router and reset the printers wireless network using its integrated control panel.

    In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

    I tried both WPA Personal and WPA2 Personal, both with the same effect.

    For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

    After installing printers web interface WIFI, the problem is always the same and it does not connect.

    HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

    Concerning

    Ian

    After playing well, I managed to find a solution for this!

    For all users who are unable to find a solution by using the other methods, here's what to do.

    Change your local network to open the safe but note your WIFI settings for your default installation.

    Connect the printer to the open network the HP software (via USB cable)

    Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

    Click on 'Network', then click 'Advanced' on the left.

    Enter the network settings as they need to be secured.

    Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

    Turn on your wireless security, on your router and then the printer should connect!

    I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

    HP - feel free to thank me in this post!

  • BlackBerry 9700 "bold" blackberry smartphones does not connect to wifi

    I have a blackberry bold 9700 and I got it a few days ago and every since then ive been trying to get the wifi working. Phones unlocked by the way.

    I implemented the wifi fine but in manage connections, I have my network in green next to my wifi and a white check mark to the right and its supposed to be a checkmark im assuming.

    No matter what I do my wifi symbol does not illuminate white his gray yet and I have configured the wifi and it says it's connected but still no wifi.

    What settings on my phone or my internet or my phone I do not know now im so confused.

    and I have a router linksys and im with rogers and im new to blackberrys.

    The white tick means that you are connected to WiFi rotate.

    A green check mark indicates that you are connected to the WiFi router AND your BlackBerry BIS data plan. Do you have this data Plan on your mobile service provider account?

    If this is not the case, call them and ask.

    Good luck.

  • BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

    We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

    SlaKir wrote:

    The answer is YES

    Well, then your USB port is likely.

    Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

    Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

    Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

    Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

  • BlackBerry smartphones can not connect to the Mobile network

    Hi there, I really hope that someone can help me with this frustrating problem. I have a Verizon Blackberry Curve 8530 I bought on eBay. I have not had any problems to get the phone activated and it worked like a champ. A few days earlier, the battery got very low and my connections disabled. I charged the phone and now it won't let me connect to the mobile network! When I select the option it tries to connect and a red 'X' appears and it does not connect. However, it WILL connect to WiFi. WTF.

    Hello!

    I suggest the following:

    (1) dial * 228 and select Option 1. To make again, and select Option 2.

    (2) registry HRT

    • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

    (3) Service reference books

    • KB02830 Send the directories for the BlackBerry Internet Service

    (4) batt Pull Reboot

    • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then you must contact VZW for assistance.

  • BlackBerry smartphones can not connect to the Blackberry server

    I can't send or receive messages BBM or connect to the internet. Status of the service, I said "m not connected to the Internet Service or Enterprise Server. I am connected to my mobile provider and I seem to be the only one having this problem with my friends.

    I understand the problem. The problem came from a problem/mistake with my mobile operator and change/upgrade plan. If the problem is not related to the BB server.

  • My sound icon blackBerry smartphones does not open on the touch screen?

    My sound icon does not open on the touch screen?  All other applications open?  I locked it somehow?  Help, please!  : )

    Begin by a traction battery, if you have not already. With your phone, remove the battery and then replace it.

    I hope that helps you.

  • Sync of DM of blackBerry Smartphones 'are not connected to the internet.

    I have the BB Curve 8330. I HAD DM 4.3. I bought the new computer, with Windows 7, and I downloaded the latest version of the DM. Now the message says that you are not connected to the internet. I did a lot of research today, and I do not understand much about the proxies. The only thing I see is that I listed port 80, but I see no other. I don't know if I need these two ports, and if I do, I do not understand how to find the address and add the other port. I know as little about proxies that I don't even know if I am this wording of the questions correctly! Sorry! I hope someone can help without a really complicated solution!

    Sorry that I was not back to meet and finalize this - had some seedlings to make! Finally got between this rain! I digress... Well had a few other issues with my new computer, HP have called and got help from them - couldn't even send and receive emails more. I'm embarrassed to say that the problem with my timing and electronic mail was Norton Antivirus! I had to uninstall it - that you can't even do it right on your computer, you must go to their website and get a special tool to uninstall it and when it was all finished, my e-mail has started working again and so did my syncing. I can't believe that a program like this can cause so much havoc. I know there are a lot of threads that say to deal with your antivirus, but there was a trial version on my new computer that I had not subscribed too, and even the trial were exhausted. I had checked all my settings on anti-virus, but it didn't matter. I had to uninstall all.  Thanks for your help anyway. You always learn a lot that you go when you run into problems. My own Kaspersky program is now installed, my BB is in sync, work e-mail, and seeding is finished - everything is good!

  • iPad does not connect to the Wifi on the range 192.168.0. *.

    I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

    I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

    After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

    My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

    Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

    Is there a future fix for this?

    Re: iPad wifi suddenly does not save

    Change the range on the router you want to connect to.

  • Mac does not connect to the wifi and keeps crashing

    My macbook pro (end 2013) will not connect to my wifi although each device only. Now he has slow veey hone and continues on crashing, doing simple things like a PDF of scrolling. It all started a week or two after the upgrade to OSX El Capitan

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • M177fw does not connect if the WiFi extender is activated

    Main WiFi router's CISCO E4200

    WiFi Extender is TP-LINK TL-WPA4220

    Printer is HP LaserJet MFP M177fw Pro

    Date of the firmware: 20130823

    Install Smart SW Version: 20/06/2013 1.0.13171.352

    Printer is in the same room as the CISCO router.  Extender is located in another part of the House.  Extension signal is low near the printer.  The Extender is turned off, the printer immediately connects to the WiFI network.  When the extension is enabled, the printer tries to connect several times and fails.  All computer iPhone, iPad, laptop and smart TV in room normally works with the CISCO and extension under voltage, but the HP printer does not work.  Is there something I can do to fix this?

    This has always been a problem with 2 AP make sure the router and the Extender are on different channels, like 1 & 6, 6 & 11, 1 & 11.   Where is the printer, set this AP to channel 1.  Try now.

Maybe you are looking for