[Playbook WebWork] Error compiling example, sketchPadStandard.

Error compiling example, sketchPadStandard.

Hello everyone.

I just installed the environment well, I tried to compile the example.

Can someone explain this error?

Note that I have spaces in my way...

It's the default installation path:

C:\Program Files (x 86) \Research in Motion\BlackBerry WebWorks Packager for PlayBook\bbwp

And yet it works... so always think he's prob depends on your JDK version.

In any case - njoy the coding and the sim card

. H

Tags: BlackBerry Developers

Similar Questions

  • try the consumer on the playbook, but error when compile...

    Hai all, I tried Messaging on SDK Playbook, when I compile appears error like this

    Error: Unable to resolve resource bundle "e-mail" for locale "en_US".

    Error: Could not resolve the "journaling" for locale "en_US" resource group

    Error: Unable to resolve resource bundle "collections" locale "en_US".

    my code is:

    _Consumer = new Consumer();

    _Consumer.channelSet = new ChannelSet();

    _Consumer.channelSet.addChannel (_streamAMF);

    _Consumer.destination = "RTStream";

    _Consumer.selector = "Viewer ="RT"

    _Consumer.addEventListener (MessageEvent.MESSAGE, onMessageHandler);

    _Consumer.subscribe ();

    can someone help me?...

    Continuous support of Playbook SDK?

    Thanks before,

    Rick

    Hi all, after I changed my configuration on Configuration external tool (Run--> external tool--> Configurations of external tool) and added - library-path += "/ Applications/Adobe Flash Builder 4/sdks/blackberry-tablet-sdk-0.9.0/frameworks/locale/en_US" works well.

    Thank you Fabien...

  • hasDataCoverage fails for Playbook WebWorks

    Hello

    'HasDataCoverage' should work for Blackberry Playbook Simulator (beta 2)?

    I'm using the SDK WebWorks... and get the error message: "you are not in the coverage, try adding cities later.

    Do I have to activate something else, or if this feature is not enabled on the playbook Simulator.

    Thanx, H.

    PS: Do not know if there is somewhere else to post Playbook & Webworks related research - there is no Tablet OS section for webdev, only for AdobeAir

    hasDataConnection returns true if there is at least one network interface active on the PB. It works fine on a real device. For some reason, the Simulator always returns false. It might be because of the VMware virtual network bridge.

  • Audio player of PlayBook webworks.

    I'm playing the audio data from the system of local files and internet audio stream.

    I tried blackberry.audio.Player method explained in the documentation of the api webworks. I guess the playbook does not have this object installed, because as far as I can see, I'm an exception due to the access to the object not initialized.

    Secondly, I tried jplayer, which uses the music player if html5 html5 extensions are available, and falls to adobe flash player if html5 is not successful. It has always failed...

    Third, I tried the pure html5 player. I can see the commands, the audio length is displayed with '-' value? (I did not understand why?) but no sound.

    I tried the method of second and third in google chrome, it works. Do you have an idea what could be wrong? What is the recommended method for the audio playin?

    Hello

    There was some discussion around this topic on the forums.  The blackberry.audio API is only on the smartphone platform... The PlayBook WebWorks APIs can be found here:

    http://www.BlackBerry.com/developers/docs/WebWorks/API/PlayBook/

    Audio not playing is not in the Simulator is a known problem.  The 0.9.4 Simulator comes not with any codecs to be able to play the video or audio.  This will be corrected in the final RTM version of the Simulator.

  • Error compiling Movie

    I used CC for a year now, updated regularly and have never had this problem when rendering. This message appears:

    Movie compilation error.

    Export error.

    Error rendering completion.

    Writing with the exporter: MPEG overview

    Writing to the file: \\?\D:zAdobe_Edit_Files (by car) \Demos\WaitEnabled\Adober Premiere Pro Video Previews\WaitEnabled.PRVzRendered - cf67f8e5-5e60-4906-8045-7761fb79d4ea.mpeg

    Write file type: MPEG

    Around the time code: 00:00:09:18 - 00:00:10:01

    Component: MPEG overview of exporting type

    Selector: 9

    Error code:-2147287036

    I don't know what is the issue.

    Error compiling movie... some debates and ideas

    May be due. on behalf of https://forums.adobe.com/thread/2166620

    -1, create a new project and import the project that has errors and see if that fixes the problem

    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

    - and a long discussion https://forums.adobe.com/thread/1240823

  • 'Error compilation film unknown error' made or export in first or Media Encoder or

    Hi all

    I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:

    1. The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
    2. My specs:

      Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.

      Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
      Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image.

    3. My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.

    I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »

    Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.

    Hi Nathan,

    Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.

    For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.

    Firstly, log a case with support. Here are the details on how to contact them.

    The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.

    If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.

    Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.

    This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.

    Info: FAQ: how to speed up making, export or encoding?

    Thank you
    Kevin

  • 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

    Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

    Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

    First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

    -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

    -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

    -All images is 1080 p, so there is no scale happening (not with any of the effects either).

    -Switching to export "in/out sequence" export "entire sequence."

    -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

    -A tried to make CBR instead of the variable.

    -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

    -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.


    Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.


    Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

    I'm sorry, please excuse my behavior; I'm frustrated.

    We have progress!

    So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

    First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

    So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

    Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

    I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

  • * Error compiling Movie - Unknown Error * when exporting/rendering.

    Whenever I try to export the media or to restore the timeline, he appears with this error. "Film compilation error. Unknown error. »

    Screen Shot 2015-10-20 at 2.31.38 PM.png

    As you can imagine it's very frustrating, I followed the same process accurate I always did and he have never had a problem previously. No media is missing, and I even tried to use the YouTube preset - wrong again.

    I use first Pro CC 2015 - I even tried uninstalling and reinstalling as update all the CC apps.

    If the first does not know what is the error, how am I supposed to know? Help, please!

    Error compiling movie... some debates and ideas

    -1, create a new project and import the project that has errors and see if that fixes the problem

    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html

    - and nested sequences http://forums.adobe.com/thread/955172

    - and WMV files of http://forums.adobe.com/message/4629210 frame rate

  • Media Encoder: Error compiling Movie - unknown error

    As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

    Hi Charles,

    Have you tried to export with Premiere Pro?

    Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

    Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

    Have you tried to make the scenario first before export?

    If possible send a screenshot of the full timeline.

    Vinay

  • Cannot restore: error compiling Movie: unknown error

    Hey there,

    Need help,

    I'm working on a short sequence (15 seconds).

    It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

    The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

    I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

    When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

    Details...

    CS6. O

    MacBook, 4 GB Ram,

    Graphics card: NVIDIA GeForce GT 330 M 256 MB

    Thank you,

    Simon

    Hey,.

    Thanks for the tip - tried all of those, unfortunately with no joy.

    I have not deleted my cache - also no joy.

    BUT I installed a (now 6.0.5) update and it does.

    Thanks for the help,

    Simon

  • Error compiling Movie.  Unknown error.  Premiere Pro export failed

    Error compiling Movie.  Unknown error.  I get this message when you try to export my calendar to any format.  It exports for a while, then I get this message.  When I try to export using the media encoder it gives me just the sound of sheep.  I'm starting to hate this sheep.

    Does anyone know how to figure out why it throws up to this error message, and that the solution is to go around?  I've lost countless hours trying to figure out a work around.  I can't just scrap the project, it took me weeks.

    I was able to export fine dozens of times before, so I'm not sure it's important that my features are but here goes:

    Custom PC integrated with windows 7pro SP1

    Intel Core i7 - 2600 K CPU @ 3.7 GHz 3.4GHz

    16 GB of ram

    64-bit operating system

    After the implementation of many suggestions here, I was able to export the project 9 min successfully.  I need to take you all at dinner.

    I don't know what suggestions has been around, but I have a feeling that it was a combination of ideas that went around.  Here's a breakdown of what I did to change the project so that it can successfully export:

    1.) reset all stills in motion tab to its original settings & then click right on it in the timeline panel and choose 'to scale to the size of the image.

    2.) replaced all files nested with the original tracks.

    3.) changed the sequence settings (changed under subsection video previews and editing custom Mode > select the File Format as Microsoft AVI, uncompressed Codec Preview.)

    I had to make a new render all previews after changing the settings of the sequence, and I had i/o errors while the process, but Adobe first CC of reboot resolved somehow these errors.  Several times during the editing process of the chronology (based on items 1-3) previously mentioned I had to reboot first due to a loss of the preview screen and inability to make things.  At the end of the day, I could so that he could succeed export so again once I thank you all.  It's a VERY important project for me and I'm serious about you take all this at dinner

  • Error compiling WebWorks app

    I'm trying to compile an application with the SDK 2.2 Webworks and I get this error:

    com.yahoo.platform.yui.compressor.CssCompressor: error! : lack of battery card in: label: 18
    [ERROR] CAP exception has occurred

    What does that mean? How can I solve it? The complete stack trace is downstairs, with the version of Java that I use:

    > java-version
    Java version "1.6.0_29".
    Java (TM) SE Runtime Environment (build 1.6.0_29 - b11)
    The Client Java VM (build 20, 4 - b02, mixed mode, sharing)

    >.\bbwp.exe test.zip

    [INFO] Parsing of the command line options
    [INFO] Bbwp.properties analysis
    [INFO] Validation of archive application
    [INFO] The analysis of config.xml
    [INFO] The application of filling source
    [INFO] Compilation of application BlackBerry WebWorks
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    Static exported routine: .main (String []) corresponds to multiply.
    com.yahoo.platform.yui.compressor.CssCompressor: error! : lack of battery card in: label: 18
    [ERROR] CAP exception has occurred

    OK, all inclusive...

    In case anyone has this error in the future: it turns out that I forgot I threw all sencha touch package at the request. The error appears when the jsbuilder folder is included in the application.

    Thus, everything works fine now... Thank you.

  • WebWorks compile example sketches - stuck!

    Hello

    try to start with the sketchPadStandard.zip example

    On Mac OS X, it is registered:

    OK, I had this problem too. The difference (which is not obvious at all on a Mac), it's that you need compress individual files, rather than a folder containing the files. Thus, since the project directory, do something like:

  • [Playbook WebWork] Deployment error. Where is the Simulator?


    The server where I am deployment didn t have the internet connection.

    (The server had a local connection, but...).

    Solved.

  • New SDK Webworks error during Application of packaging

    Everything worked fine until I updated to the new SDK Webworks. Now I get this error, then I reinstalled everthing. I went through the process of setting up environmental variables pointing to the SDK and jre, but nothing helped. I reinstalled all components at least 3 - 4 times always with administrator privileges but cannot make it work. I try to compile my application with the new SDK and submit it so that it runs very well update the OS of the Playbook.

    The error I get is:

    OK, so I solved the problem by setting the name of my loading screen (thats why the error said SplashScreen). I never noticed that my background image has 2 i in since version beta SDK never threw any errors. I would have thought more of said error; He would have led me to how to fix more quickly (an image not found problem with splashScreen).

Maybe you are looking for

  • Photos no longer synchronize with the iPad

    I can are no longer synchronized pictures opening with my iPad (s). I selected several albums opening of synchronization when it is attached to iTunes on my Mac. All other items will be synchronized (music, movies, etc.), but the pictures never compl

  • Need help have infected files in the files C:\SysVolInfo and drwtsn32.exe

    Since writing in days ago and got the help of support Ben everything went well. Today got on the internet and page keeps telling me to download adobe Flash Player again and it is supposed to be already in my files that I had put them there. Where the

  • MICROSOFT OUTLOOK... on pc startup

    Hello When I start my computer, windows microsoft outlook appears and I can't use it or see it... How can I clear check - in Autorun I see nothing... I would have one other than outlook as default e-mail... I can't do it on windows 7 - it was easier

  • App regular pool recycling that occur twice

    IIS7 on Server 2008 Application pool - fx .NET 4.0, integrated mode, Idle Time Out = 0, is set to recycle once a day at 10:00. Maximum working process = 1. At the scheduled time, that the application pool is recycled twice, both times with the event

  • DV2945se drivers

    I have a dv2945se that comes with having a new facility, he made of the recovery partition. However, there are 4 drivers that give me questions and I can't solve. DV2945se, Vista 64-bit The devices appear in device as Manager: Base system device Base