Player SD on ACER laptop does not

I have a laptop ACER Aspire 5735-4474.  I was always able to load pictures from my SD cards. Now computer laptop does not yet see the card when I plug. What's wrong?

Hi Bob,

Thanks for choosing Microsoft Community!

You have reached the right forum. Try to solve this problem.

If I understand correctly, the SD card reader fails on the Windows vista computer.

Please answer these questions to better understand the issue:

1. have you tried it with different USB ports?

2. have you checked the reader of card on another computer?

3. other USB keys work on this computer?

4 you did changes to the computer before the show?

Let us try the following methods:

 

Method 1:  Try again with different USB ports and see if that helps.

 

Method 2: Run the following fix - it:

Hardware devices do not work or are not detected in Windows:

http://support.Microsoft.com/mats/hardware_device_problems/en-us?WA=wsignin1.0

 

Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

Tags: Windows

Similar Questions

  • Problem with my Acer laptop does not connect to my home network.

    Hello

    I had a problem with my laptop. The laptop does not connect to my home network.

    I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

    My specs:

    Acer Aspire 4250 ongoing Windows 7 SP1.

    Dlink DSL-2730u (secure wifi with WEP 128 bit key)

    Please solve my problem...

    Original title: problems with my Acer laptop

    Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

    If this is the case try to configure WPA2 or WPA rather than fall to WEP.

    Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

    Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

  • Acer laptop does not start after the blue screen

    After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

    The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

    But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

    1. try the system restore.

    2. try to do a startup repair disk.

    3 acer Recovery Options.

    4. contact Acer.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

    Acer eRecovery made

     

    1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

    ·        The unit is able to reload Windows from this mode faster then CD.

    ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

    ·        Users are able to change the password in this mode for eRecovery only.

    ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

    ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

    2. in Windows, there are 3 ways to access eRecovery functionality.

    ·        Press Alt and F10

    ·        Open Acer eManager and then double-click eRecovery.

    ·        When a system is new it should automatically open this application and invite you to do the recovery media.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.Acer.com/worldwide/support/index.htm

    Support &

    See you soon.

    Mick Murphy - Microsoft partner

  • My ACER laptop will not start Vista

    My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

    Hello

    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    How to access Safe Mode

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    How to reinstall Vista on an Acer:

    "With the help of the outside Windows Recovery Management"

    http://Acer.custhelp.com/app/answers/detail/A_ID/2631

    See you soon.

  • My Dell laptop does not recognize the DVD / CD player or D drive more.

    My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

    Original title: DVD player

    If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

  • my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    Hi dove2k,

     

    Welcome to Microsoft Answers Forums.

    You will need to enable the touchpad on the laptop itself.

    Find the area of the touch pad, you will find a button to enable or disable the touchpad.

    If the step above doesn't, try this step.

    Go to control panel > mouse > device settings tab
    Click (or to disable)

    Notes:
    On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
    You can click on Reset device if none of these solutions work.

    If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

    My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

    I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

    When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

    A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

    If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

    Hello

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • my microphone on my laptop does not work!

    Hi im trying to figure out why my microphone that is built into the laptop does not work, I think I could of turned off but I don't know how to turn someone can help me?

    Hello

     

    If you have turned off the microphone on the system, follow the steps mentioned below to activate it.

    a. right click on the sound icon that present in the Notification area (at the bottom right of the screen).

    b. click on recording devices and make sure that the Microphone is listed under recording devices.

    c. If it is listed, then right-click on it and click active.

    d. click on it and click set as default.

    Let us know your progress.

    I suggest you to check the article mentioned below for more information.

    Connect one microphone, music player or other audio device to your computer

    http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My laptop does not recognize the DVD drive or an external USB DVD drive.

    My laptop does not reconise the integrated DVD or an external USB, DVD player.  But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine.  He could read the disc.  Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ===================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please make all underneath the same if you have done some before as is often
    the set of operations that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device.
    The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
    the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
    If the drive appears not to continue below.

    Then, work your way through these - don't forget the drive might be bad, might
    having a cable loose or slight corrosion on the contacts (usually for a laptop) and
    other questions.

    Your CD or DVD drive is missing or is not recognized by Windows or
    other
    programs
    http://support.Microsoft.com/kb/314060

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other
    programs - a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that
    you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the
    Setup Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then check
    in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
    Often, clean power and contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system
    Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
    (Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
    No function while others do so properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? He
    are some registry entries that do not fix the resolution of problems and those who "might".
    be the cause.

    Check with your system manufacturer Maker and possible device for two firmware
    updates
    and the correct registry entries for your car.

    Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
    the key of course because there will be other subkeys in these keys. Do not forget to ask specific
    involved as well as the settings key.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
    Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager,
    that displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after installation of Windows 10

    Flash Player 21.0.0.242 does not work on Firefox 46.0.1 after the installation of 10 Windows on a laptop of Dell XPS 17 L702X. Continuously, it crashes. It works great with IE and Chrome.

    I tried the following:

    -Disabling Add-ons on Firefox

    -Do a clean installation of Flash Player

    -Do a reinstall of Firefox

    When I use "Flash Player Help" to check if Flash Player is installed, he said that my operating system is Windows 7. It is not; It's Windows 10. I used recommend it download when I looked at the Adobe Web site.

    What should I do to get Flash Player to work on Firefox?

    Thanks in advance for your help.



    I downloaded the 64-bit version of Firefox and Flash Player works now

    fine. I left the 32-bit version on my computer at the moment.

    Thanks a lot for your help. I really appreciate it.

  • Laptop: laptop does not start

    My laptop does not start, how can he?

    Hey,.

    First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

    If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

    Windows 10 - http://support.hp.com/us-en/document/c04718479

    Windows 8 - http://support.hp.com/us-en/document/c03515402

    Windows 7 - http://support.hp.com/us-en/document/c01443371

    -wes

  • Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

    My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

    Ruizgeraldine

    Hello;

    Let me welcome you on the HP forums!

    I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

    The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.

    I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

    You must download and install the full feature software and drivers for the printer.

    Then unplug the printer and install the software.

    Do reconnect the printer until the installation program invited to do so.

    Once the installation is complete, restart.

    You should then be able to use your printer in Win10.

    Good luck

    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
    Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
    ========================================================================

  • iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

    iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

    If you do not see your device in iTunes for Mac - Apple-Support - https://support.apple.com/HT203979

    Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart

    You don't say anything on your computer.  I don't even know if it's a Mac or a PC. This may apply to you:

    iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

    At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

    Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

    Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

    Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

    If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

  • Touchpad on the laptop does not scroll upwards or downwards

    The touchpad on the laptop does not scroll upwards or downwards, I was offline for 5 weeks that my router broke out between the change of operator, so I had to wait for another.
    When I was on the touch pad was'nt working properly. I can't do a system restore, because that would be the former provider. Ideas anyone please?

    First, check the scrolling settings in the advanced settings of Touchpad.

    If they are enabled, uninstall the mouse/keyboard 3rdparty as Logitech or Microsoft and Watcom drivers that may have installed you.

    If it's no good, uninstall the Toshiba touchpad driver, then download and install the latest version.

  • My laptop does not recognize the HDMI cable

    I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives.

    I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of months before the summer, but I managed to get back to work and it was very good and stil in good shape.

    A few weeks ago, I dropped the laptop from the desktop and it fell on a carpet. Isn't difficult, but not smoothly either. And it is always on when I got it up and working.

    When I stopped it the laptop refused to start. I did a quick diagnosis to check the hard disk and it says already something with red letters.

    I took the laptop PCs store and human a glance told me, the hard drive is dead and I need a new one fitted. "Everything is in good condition", he assumed, and I agree with him to change the hard drive.

    I told him specifically to replace the hard drive with another 1 TB, but he subsequently advised me with good confidence that I was better with a 320 and buy an external hard drive. The laptop will work very well in terms of speed. He mounted in a 320 HARD drive and gave me back my laptop with Windows 7 ultimate.

    Now, the laptop does not connect to HDMI and AMD catalyst is recognized not no matter how many times I install it. And honestly I don't know if the man really had something out of my laptop. The HARD disk he gave in return tells me his Samsung S/N: S34LJ9BG601601648

    ST2000LM003 A REV.

    PN:HN - M201RAD/M 2000 GB + 5v 0.85 A

    Please tell me that it is a HP Pavilion HDD and how can I get the laptop to recognize the HDMI connection on the flat screen TV?

    PS: I checked the amount of space to the new HARD drive that had been installed in and it said 297 GB not 320 GB. Am I missing something? Why can I not see all of the HARD disk if it is 320?

    Sorry for the long discription, I stop here.

    Nope.

    Try this:

    Click on the link below to see how to find your model number...

    Computers how can laptops HP - I find my model number, the serial number or product number?

    Scroll to option 3 to see what to look for an explanation.

    Let me know.

Maybe you are looking for

  • Satellite A100-225 - charging battery problem

    Hi people, My Satellite A100-225 can't hold the charge when running. If I use processor heavy applications, the battery will drain in about half an hour and recharge only when the cover is closed (standby mode) or the laptop is turned off. When the e

  • generation of carrier multi using vector signal generators OR

    Dear all, I have a client who asked me about the capacity of the vector signal generators OR to generate signals porters multi, and if yes, what will be the minimum displacement between adjacent channels? There already buy a complete RF PXI system of

  • Software HP Deskjet 960C

    I recently bought a new computer for my wife.  The OS is Windows 7 Professional.  The printer is a HP deskjet 960C printer.  I can't seem to find the records of installadiotn to the printer and the HP site seems to say that there are no downloadable

  • HP Mini 110-1116NR: driver HP Mini 110-1116NR PC loading error

    This computer is unable to boot, so I try to reinstall Windows 7 using a USB key. I am able to start the installation process of Windows 7, but come to a driver error. The said pilot error "a required CD/DVD drive device is missing / if you have a dr

  • Trust Webcam WB-3400 t HiRes

    Try to use the webcam Trust 3400 t on Windows 7 64 bit to driver 14383, does not, please update driver, I do not have a version-02 or - 03.