Playlist says 'error' on evry song during synchronization.

I'm using WMP 11. Had a problem with E260 (load image problem). Talked to support and problem solved. Now, when you try to synchronize my playlists, each song displays an error and used to synchronize playlists. My other player (different brand) synchronizes these playlists without problem. Everyone knows about this problem? Is there another way to get these playlists on the e260 in addition to the synchronization? I'd rather do without redoing these playlists as they are significant in size. I apologize in advance if this has been answered before, but I don't see anything close to this type of problem of playlist.

Well what do you know. I had the error image has no charge again. I looked again through the forums and found a fix. I dropped the sansa.fmt folder into the 16 MB file to format the 260 again. Now it seems that everything works well (fingers crossed LOL). Thanks for the help everyone. I would have hated in the trash this small player, it has been a real workhorse for me. Thanks again and happy holidays.

Tags: SanDisk Sansa

Similar Questions

  • BlackBerry Smartphones error 0 x 83860028 during synchronization

    I recently installed the latest update for the desktop software for my Curve 8330.  Now, whenever I sync I get the error message 0 x 83860028.  The process hangs a little, then continues.  However, I believe that the calendar is not synchronized at all.  This has happened since September 17.  I don't know if it's a bit bad data that he hangs up or a software problem.  I can't find this error anywhere. It is a shared calendar in Outlook 2007.  Vista is my operating system on the computer.  I was able to sync to the top until there. No corrections or help?

    There is no documentation on this crazy error code.  But, I think I figured this out.  I down loaded the latest version of the desktop of my desktop computer software - August 25, 2010 47 running bundle.  I'm under 64-bit Windows 7, new PC.  I received the error message 0 x 83860028.  I went in "Multimédia" and clicked on the button "reset settings".  I've reconfigured then email and calendar sync settings only.

    I then re-ran the sync and it worked.  I'm no techie, but found this with lucky.  Good luck.

  • I get the following error during synchronization itunes for itouch - 0xE800400C

    I get the following error during synchronization itunes for itouch - 0xE800400C.
    Takes forever to sync music and then fails with the above error and also says "device timed out"?
    Please, please help...
    Mar.x

    Hello

    ·        What is the version of iTunes installed on your computer?

    ·        This device was working fine before?

    ·        Is there any software or hardware changes made to the computer, after which, the problem occurred?

    Try uninstalling and reinstalling iTunes and check if that helps. To uninstall the application follow the link below.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Download and reinstall the latest version of iTunes. Follow the link given below, get iTunes now.

    www.Apple.com/itunes/download/.

    You can also contact Apple support for further assistance.

    http://www.Apple.com/support/

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Sync has encountered an error during synchronization: unknown error." Synchronize automatically retrying this action. »

    Hello

    I want to switch to Chrome, Firefox, but I have a problem with the synchronization feature.
    It always displays the following error message: ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

    I already tried this work around, but it did not work: remove my account from syncing, completely reset my Firefox profile, import my favorites of Chrome (using an HTML file), set up a new sync account (using the same e-mail address then that previously deleted).
    But I still get the error message.

    I saw in other threads that could be a problem with the story, so I also tried to delete, but it doesn't work anymore.

    Here is my last sync-log file: https://pastebin.mozilla.org/8219943

    Thanks for your help.

    I finally found a solution to this problem of synchronization:

    I downloaded the add-on 'Housekeeping' and run the integrity check routine, and it seems to have solved the problem.

    https://addons.Mozilla.org/en-us/Firefox/addon/places-maintenance/

  • Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

    Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Apple has not renewed the contract with Google to access Google servers.

    If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

    There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

    See this: Bug: iPhoto 9.4 crashing when viewing the scene

  • Problem with sync error: synchronization has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

    Hi, I started recently a problem with the sync on my desk. My partner Android and Mac laptop no problems when you attempt to synchronize, but office always gives the same error. I tried to disconnect from the desktop computer, erase all files, restart and then adding the Office to synchronize once more, but the error persists.

    All bookmarks on the desktop disappeared, but are still in my sync data and have no problem being viewed on other connected devices. It also tells me that the issue is not the sync server and that there is something unique to the desktop machine.

    I hope that this will not require a reinstall, but if all else fails, it's an option. I'll try to attach a log file once I put the question.

    I think the error message is in the title of the thread:

    Sync has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

    Try creating a new profile as a test to check whether your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • BlackBerry Smartphones internal error #-728 down the log synchronization on the storm to Outlook synchronization

    Error occurred during synchronization BBStorm 9530 OS ver 5 to Outlook 2007 and Windows XP PC synchronization will stop with the following message is displayed: "error occurred. 0x8004fd28 error code. See the Documentation"I went to a forum that says look at the synchronization log and see if there is a line"ignore"at the bottom of the journal. I checked the synchronization log and inside, it has the following: "Internal error #-728" I can't find a reference to this anywhere.

    Read this article from the public knowledge base.

    KB16153 "0x8004fd28" error during the synchronization of calendar using BlackBerry Desktop manage

  • Cannot install updates custody saying error 0x8007007f.

    original title: cannot install updates custody saying error 0x8007007f. Why is this and how to fix this

    As my title says is that the problem can not install updates custody saying error 0x8007007f. Why is this and how to solve this problem and when I click on protector of windows it says cannot find program. How can I fix

    Hello

     
    1 are you facing this with any updates or specific updates?
    2 did you changes in the computer before this problem?
     
    Method 1: Run the patch from the link below, restart the computer and install updates.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
     
    Method 2: Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
    Step 1: disable the security software temporarily.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2: Perform a clean boot and install the application.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem
     
    Method 3
    Restore the system to a system restore point when the computer was working fine. Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
    System restore
    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
     
     

    Perform a scan of the SFC to solve the problem of Windows Defender.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  • I had to reinstall my real Vista Ultimate disk > it says error: Ox80072F8F. Please, how can I install completely?

    Hello

    I had to reinstall my real Vista Ultimate disk > it says error: Ox80072F8F.Please, how can I install completely?

    Hi GjinNoku,

    1. when exactly do you get this error during activation of the copy when installing or all by activating the copy after reinstallation?
    2. how you try to install Windows Vista (Format clean install or custom install)?
    3. why you re - install Windows Vista?
    4. What is the exact error message you get?

    The information is not sufficient to answer your question. Please give us more information to answer your question better.

    Additional information:
    Installation and reinstallation of Windows Vista
    http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

    Error message when you start Windows Vista: "your activation period has expired".
    http://support.Microsoft.com/kb/925616

  • Impossible to uninstall and reinstall word 7 indicates the language does not support my system then if I put the disc reinstall anyway it says error installation and a close button...

    Once again microsft 7 uninstall and reinstall problems Impossible to uninstall to reinstall it says error language does not support my system... then if I try to put the disc reinstall it says error during installation and just one button close... help

    Please repost your question in the section group of Office documents Word to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

    Original title: backup Windows found errors on the media during a backup.

    original title: backup errors

    Whenever I try to do my monthly backup I get the following messages

    Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

    Pleas write the following label on a blank media and insert it into D: /.

    I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

    I now have an error 0 x 81000019

    Hello

    You did changes to the computer before the show?

    Method 1: Check if the shadow copy volume is running
    (a) click Start.
    (b) in the search box, type Services.msc.
    shadow copy Volume c) right-click and go to properties.
    (d) select Auto (Delayed) in the start menu type in the menu drop-down.

    Method 2: Clean boot
    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135.

    Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

    Method 3:

    Check all your drives to NTFS.

    This problem may occur if the drive is not NTFS format.

    Please follow the steps mentioned below to convert the reader:

    Using the Convert command

    1. click on the "Start" button, click "all programs" and click on "Accessories".

    2. right click on "command prompt" and click "run as administrator".

    3. in the window "Administrator: command prompt", type the following command and press ENTER.

    CONVERT %Drive% letter: / FS: NTFS

    letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

    CONVERT F:/FS: NTFS

    4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

    The type of the file system is FAT.

    Enter the name of the current volume of reader letter %Drive%:

    Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

    5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

    "Complete conversion".

    6. restart the computer and check the result.

    Hope this information is useful.

  • I get error 0 x 80070585 during the attempted download or update my apps

    I get error 0 x 80070585 during the attempted download or update my apps

    What should I do?

    HI ramin251,

    Thanks for asking this question to Microsoft Community.
    I will definitely help you with this.

    When your getting the exact messages downloading or error before?

    Follow the steps below.
    Method 1:

    Run the Windows update utility for troubleshooting. Provide links measures.

    Problems with installing updates

    http://Windows.Microsoft.com/is-is/Windows-8/troubleshoot-problems-installing-updates

    Method 2:

    Synchronize the App license:

    What to do if you have problems with a soft

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Method 3:

    Resolution of the problems of the app.

    Let us know if you need more assistance. We will be happy to help you.

  • The site for the serial number for first elements says error, s.n required for date limit!

    I've been checking back all week, but whenever I go to the website to get my serial number it says error page is not available. I need to get the serial number for a deadline due clip later this weekend! Help! is there another way to get this number? I tried calling the number also, but never received a callback, and now when I call he said just to call back during the week... which is too late for this deadline! Help!

    Mikaelakristine1993 you will need to speak to our support team to resolve your difficulties of serial number.  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to solve the problem you described.

  • Uninstall software update Apple says error in seller contact package package unstaller

    Try to get itunes working to make a backup of my faulty iphone before repair.

    First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

    Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

    Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

    Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

    When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

    This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

    Russ

Maybe you are looking for