Please help array and tables

Similar Questions

• Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe)

  Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe). To create, improve, revise, edit, and share information in Adobe PDF files, read more on Adobe Acrobat Pro ms and Adobe Acrobat Standard DC by visiting www.adobe.com/go/acrobat.

  What is your question?

• Please help - PKG and TRIGGER LOGON

  Hello
  I'm currently building a logon trigger that performs various subsidies to the objects according to the OSUSER. I tried to emulate the structure proposed here: http://asktom.oracle.com/pls/asktom/f?p=100:11:1604031168350701:P11_QUESTION_ID:646423863863
  
  The requirement is based on the OS USER logging in the basis of various privileges may be granted to certain a table.
  for example OSUSER one can only read from table T, but OSUSER B can have SUID. Our approach is to have a default role where the UID privileges are missing and should be granted to the B OSUER when the connection occurs:
  
  CREATE OR REPLACE PACKAGE LOGON_PKG AUTHID CURRENT_USER
  AS
  PROCEDURE MAIN;
  END LOGON_PKG;
  /
  
  CREATE OR REPLACE
  LOGON_PKG PACKAGE BODY
  AS
  PROCEDURE MAIN
  IS l_str varchar2 (4000);
  number of l_job;
  VARCHAR2 (155) - stmt: = ' GRANT UPDATE, DELETE, INSERT ON B1. A T';
  BEGIN
  l_str: = ' run immediately ("GRANT SELECT ON B1. ("T'S"); " ;
  dbms_job. Submit (l_job, replace (l_str,'"'," ' "));
  END MAIN;
  END LOGON_PKG;
  /
  
  CREATE OR REPLACE TRIGGER LOGON_TRIG
  AFTER LOGON ON DATABASE
  DECLARE p_session_user varchar2 (64);
  BEGIN
  SELECT TOP (SYS_CONTEXT ('USERENV', 'OS_USER')) INTO p_session_user FROM DUAL;
  CASE p_session_user
  When 'A' THEN START
  LOGON_PKG. MAIN();
  END;
  -Other
  -nada;
  END CASE;
  EXCEPTION
  WHILE OTHERS THEN
  -Consider recording the error and then re-raise
  LIFT;
  END;
  /
  
  Why do we try this approach? As you know, it is not possible to trigger connection directly to perform the ROLE SET-GRANT, or whether you need, and according to the post, I've referenced at all first, it should be possible using dbms_job.submit.
  
  When the syntax seems to be OK, nothing will happen when connecting. When something is missing connect is not possible and it will be returnwith the corresponding error ORA/PLS.
  
  Could you please help me?
  
  Thanks in advance.
  
  Published by: n on 29-mar-2012 08:15

  because despite the connection made by A session belongs to B with the privileges of all B.

• Please help - internet and anti connection v

  Hi, my internet guard going off and alert on my Virgin media v anti keeps turning off, said may not work due to no internet connection, saying: problem with domain name server / "DNS" pulled the plug out and in French - nothing, then suddenly it turns. I have a router that I was no problem, I got a low threat that deleted by me anti-v. It happened this morning when I turn on my pc not anti v this time, but no internet. Well want could someone help me please im not in technique and do you not because of the low threat it can caused something?, I have a screen ect. Thank you for your help and I look forward to solve this.

  Try this link: http://help.virginmedia.com/system/selfservice.controller?CONFIGURATION=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&USERTYPE=1&VM_CUSTOMER_TYPE=Cable&CMD=BROWSE_TOPIC&TOPIC_ID=1198

• How to extract a ttf from file file have this software? Please, help me and show the steps.

  Hello

  Please suggest me how to extract the file 'TTF' to a 'HAVE 'file with the help of the adobe Illustrator?

  Thank you

  Ankit Chugh

  988885156

  [email protected]              

  Ankit,

  "" "" "" but now let's look at the other face, assuming that we do not have the fonts in our machine and we will always look for file HAVE, so we have to buy these fonts, am I right on this point, I want to just be confirmed in this regard.? "" » »

  Yes, this is the case.

  You can use the file HAVE to is to establish the names of the fonts, as it appears in I like you did as shown in your #10 post, so you can buy (or just download them if they are free fonts).

• Can you please help me and Union all with example

  Hi all
  
  can you please let me know what is the difference between the union and all the.

  It is a general SQL question is better asked in the forum SQL and PL/SQL

• Please help router and vpn client

  Hi all

  I want to make a vpn between my PC (with version 4.8.02.0010 of the VPN Client) and a remote router (Cisco 2811) version of the software IOS 12.4 (9) T7 and the following configuration

  AAA new-model

  !

  local VPNCLIENT from AAA authentication login.

  local AAA VPNGROUP authorization network

  Hello test user name password

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  DNS 62.42.230.24

  domain cisco.com

  pool ippool

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  transformation-RIGHT game

  !

  map clientmap client authentication list of crypto list

  crypto isakmp authorization list grupo clientmap map

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface FastEthernet0/0

  DHCP IP address

  NAT outside IP

  IP virtual-reassembly

  load-interval 30

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface FastEthernet0/0/0

  !

  interface FastEthernet0/0/1

  !

  interface FastEthernet0/0/2

  !

  interface FastEthernet0/0/3

  !

  interface Vlan1

  192.168.4.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  load-interval 30

  !

  IP local pool ippool 192.168.4.100 192.168.4.200

  no ip classless

  IP route 0.0.0.0 0.0.0.0 62.43.195.100

  !

  IP http server

  local IP http authentication

  no ip http secure server

  IP http timeout policy inactive 600 life 86400 request 10000

  overload of IP nat inside source list 102 interface FastEthernet0/0

  access-list 102 permit ip 192.168.4.0 0.0.0.255 any

  !

  Line con 0

  line to 0

  line vty 0 4

  privilege level 15

  transport telnet entry

  line vty 5 15

  privilege level 15

  transport telnet entry

  !

  When I connect to the public IP address of the router, that everything is fine and status is connected. But I do not have connectivity to the internet and I can only ping 192.168.4.1, but no other IP address of this beach.

  I would be grateful any sort of kelp.

  Thank you

  You must make sure that your internal traffic goes to the VPN client is NOT be NATT would be.

  You need to re - write acl 102 to something like: -.

  access-list 102 deny ip 192.168.4.0 0.0.0.255 192.168.4.0 0.0.0.255

  access-list 102 permit ip 192.168.4.0 0.0.0.255 any

  HTH >

• Someone please help me with the installation of an updated on my Blackberry browser

  When I access windows live on my windows (9330) BlackBerry curve says I need an upgraded browser to use windows live. Internet Explorer is not available for Blackberry. What am I supposed to do at this point? Please help me and if possible send me your opinions and or solution. * E-mail address is removed from the privacy *

  Hi TimHayner,

  I suggest you to contact Blackberry support for more help and information.

  http://us.BlackBerry.com/support/

• Windows Vista repair boot loop - please help.

  Hello

  I had trouble with my laptop startup and having the dreaded loop of the Startup Repair. It started last night and I did everything I could to get it to allow me to connect on the long desk, enough to get my files, but there all come without result. I am now on my attempt 67th to get startup repair and desperately need help. My only problem is, is I have not backed up my files both needs so I can't do a full restore of the PC. Call me stupid, because I already know that I am.

  I already tried the three security modes, the last good configuration known and all the rest on the list of F8, but also contact Toshiba support, but none of them has nothing to help me. I did the whole thing from the CHKDSK, but she came back everything was clean, much like the Startup Repair tool says that there is 1 origin but he can't find not and comes up with the error code 0x0. I do not have a re-temperament of OS disc either and nor do I live near a "Geek Squad" of any kind. In addition, I can't restore my computer to an earlier point.

  I am at my wits end and very close to burst into tears because I can't get my laptop to work and I think my only option I have left is to do a complete restore of the PC, and I REALLY don't want to do that. My life is on my computer and I feel so stupid for it backs do not. This will definitely a lesson to be learned.

  My computer is a model of Toshiba Satellite L355D with windows SP2 and Vistax32bit.

  Please help me, and if this issue is resolved, then, I will be eternally grateful.

  Thank you for your time,

  MissSakura

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• weird problem with new screen, please help

  Hello people,

  I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

  This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

  I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

  Monitor: monitor LCD Compaq CQ1859

  Do I something pressed or clicked on something by accident?

  Is there a setting some part that I forgot?

  I plan to cast the spell by the window, its really annoying.

  Please help guys and ladies.

  Hello salamander.

  Please contact Microsoft Community.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  1. What is the model of the computer and do ?
  2. Do you see an error message when the menu bar is transparent?

  Please follow the link below and include a screenshot in your post,

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  I suggest you follow the methods below to see if it helps.

  Method 1:

  Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Note: If the problem persists, continue with method 2

  Method 2:

  Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

  1. Right-click on a vacuum of space on the desktop and click on personalize.
  2. Click on the link to the color of the window at the bottom of the window.
  3. Uncheck the check box enable transparency to disable transparency and check the issue.

  For more information, aero feature please refer to the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

  Note: If the problem persists, continue with method 3

  Method 3:

  A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Update graph HP Slimline? PLEASE HELP!

  Basically, I have hp slimline and the graph is crap... so what I want to do is to update, but I do not know what graphics card will work with her! and I know I need map profile there because the food is crap to...

  the games that I really want to play is Call of duty balck ops, mw2 to the adjustment of the height, bad company 2 and more games! and also I know that this called HD5450 graphics card and I'm not sure it will work!

  Thank you for any help, because I do not think to buy a new pc! and if you don't have any idea of the graphics card update then leave because I don't want not any information of falls

  Here is my system to the Mint:

  current system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: NQ807AA-ABU s3811uk
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Pentium (r) Dual CPU E2220 @ 2.40 GHz (2 CPUs), ~2.4GHz
  Memory: 3072 MB RAM
  Available OS memory: 2942MB RAM
  Page file: 1355MB used, 4525 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode
  Card name: NVIDIA GeForce 7100 / NVIDIA nForce 630i
  Manufacturer: NVIDIA
  Track type: GeForce 7100 / nForce 630i
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_07E1 & SUBSYS_2A6510...
  Memory display: 1336 MB
  Dedicated memory: 121 MB
  Shared memory: 1214 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: HP 2009 series Wide LCD Monitor
  Monitor model: HP 2009
  Monitor ID: HWP2827
  Native mode: 1600 x 900 (p) (60,000 Hz)
  Output type: HD15
  Name of the driver: nvd3dum.dll
  The driver file version: 8.17.0012.7533 (English)
  Driver version: 8.17.12.7533
  DDI version: 9Ex
  : Model WDDM 1.0 driver
  Driver attributes: Final retail
  The pilot/size date: 25/05/2011 08:24:42, 11992680 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71E3E-44A1-11CF-E16E-690A1CC2C535}
  Vendor ID: 0x10DE
  Device ID: 0x07E1
  SubSys ID: 0x2A65103C
  Revision ID: 0x00A2

  So please help! And sorry for the bad English!

  Hello

  You can find more information:

  Figure 1-Top view of motherboard

  

• AS3 click Tag - please help!

  I read on questions posted on click on tags and can not understand my problem.

  I have a dynamically loaded button 'myViewPackagesBtn '. The publication that I create this banner ads says that I need to create a "clickTAG" and do not have a hard-coded url and they ned to be able to track clicks.

  They said to use this code:

  on (release) {}

  getURL (clickTag, "_blank");

  }

  My AS3 code is as follows:

  myViewPackagesBtn.addEventListener (MouseEvent.MOUSE_UP, goSite1);

  function goSite1(evt:MouseEvent):void {}

  navigateToURL (new URLRequest ("http://phgoffers.com/participatingHotels.aspx?id=327 & src = 12113815"));

  }

  You please help me and let me know how to accomplish what they are asking for?
  Thank you!!!

  If they require you to use the AS2 code, you cannot use your AS3 code.  If you can use your AS3 code, then you need to replace the url with the variable "clickTAG"...

  myViewPackagesBtn.addEventListener (MouseEvent.MOUSE_UP, goSite1);

  function goSite1(evt:MouseEvent):void {}

  navigateToURL (new URLRequest (clickTag), "_blank");

  }

  To get the "clickTAG" variable assigned, you will probably need to study using FlashVars.  The value of "clickTAG" is generally attributed as part of the html code to embed the swf file in web page.  That allows anyone to change the link via the HTML rather than having to edit the swf file.  You can check with the person who wrote the rules for this.

• Please help, insert table 1 d 2d array

  Hello

  I'm trying to insert a line of table 1 d in table 2d, but it must be placed in the index as the starting point.

  For example, line 1, column 2. = starting point.

  I already wrote the program, but the result is not that I want to.
  As shown in the picture, a number of 6 in. (0.2), it must be placed in a yellow highlight.

  Please help and guide me.

  

  Hey fatty,

  using shift registers:

  

  It is perhaps a good idea to include some range checks, because it is not possible to replace the non-existing items...

• Table and the loop problems (please help)

  Im making a site for a project where I have to include a table and a loop.
  
  For this section, I put in a "contact us / Q and A" page where the user can enter a name, email, and question.
  This information is sent to a table and then following image shows the form of the table information in the dynamic text boxes.
  
  I've included a loop to check that each part of the table contains data (name, email and the issue).
  Then I have an If Else, which clears the form either if a section has been missed, OR if the form was completely correctly it directs the user to the frame following where as I said above the details appear in dynamic text boxes.
  
  The problem im having is the loop to check For the table that's a waste. Someone can please help me out here and get the loop to verify that all fields have been filled.
  
  Here is my code for the initial frame
  
  

  You must update the values in your table at the time you press the submit button. Code follows

  There is a second example to check the strings (it's a little complicated, but it's a useful trick if you can understand). This does not leave the Send button work unless all fields have something in them

• Creating a table of jpg files external, please help.

  So what I want to do is to load external jpg in an array of MovieClips and then access the main onEnterFrame function. My code is below:

  var imageLoader:Loader = new Loader();

  var imageArray:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i < 9; i ++) {}
  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  Demonstration [i] = new MovieClip();
  imageArray [i] .addChild (imageLoader);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  I tried to add an Event.COMPLETE function, I found:

  imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
  
  function imageLoaded(e:Event):void {
       var image:Bitmap = (Bitmap)(e.target.content);
       imageArray[i] = new MovieClip();
       imageArray[i].addChild(image);
  }
  
  Unfortunately, I usually only ended up with 1 or 0 images, and errors. I can't seem to properly pass the i
  value, so that's a big problem because the order the images go is key to my program.
  
  Please help me get this working so my image gallery can work, thanks!

  So the problem is that you want in the table in the order I'm right on that?

  See the updated code:

  var imageArray:Array = new Array();

  var imageLoader:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i< 9;="" i++)="">
  [i] var imageLoader = new Loader();

  Demonstration [i] = new MovieClip();

  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  imageArray [i] .addChild (imageLoader [i]);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  / * function imageLoaded(e:Event):void {}
  Bitmap of the image: var = (Bitmap) (e.target.content);
  imageArray [index] .addChild (image);
  }*/

  In this case, you are unable to follow if an image is loaded or not. It's easiest to do this. If your images do not come from dynamic sources and are set in the number and the position, you can use this method too.