Please help (IN NON-GEEK SPEAK!) «This connection is untrusted you asked Firefox to connect safely to my.ferris.edu, but we cannot confirm that your c...»

"This connection is Untrusted".

You asked Firefox to connect safely to myfsu.ferris.edu, but we cannot confirm that your connection is secure.

Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
What should I do?

If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue. »

Tags: Firefox

Similar Questions

I don't get "cannot confirm that your connection is secure error in firefox for my hp7680.

I have a problem installing my HP Officejet Pro 7680 network on my new computer Windows 7 (64-bit). I get the error message is:

This connection is Untrusted

You asked Firefox to connect
firmly on 192.168.1.2, but we cannot confirm that your connection is secure.

Normally, when you try to connect safely,
sites will present a reliable identification to prove that you
go to the right place. However, the identity of this site cannot be verified.

What should I do?

REHS

This error comes up during installation of the software? or when you enter the IP address of the printer in Firefox? If it's the latter simply select the option to continue and it should load the Web server integrated (EWS) of the printer.

When I open Firefox browser, I get music siren followed by arcade. Please help me get rid of this.

This morning at 10: 30 PDT when I opened Firefox browser, I had a type arcade of its follow-up of a siren sound that will not go away until I closed Firefox. Please help me get rid of this annoying noise!

This has happened

Each time Firefox opened

today is 2010-05-21

This morning at 10: 30 PDT when I opened Firefox browser, I had a type arcade of its follow-up of a siren sound that will not go away until I closed Firefox. Please help me get rid of this annoying noise!

Error, please help me, how to handle this?

Please help me, how to handle this? 2892 ArgumentException: the parameter: System.Net.Sockets.OverlappedAsyncResult is not valid. Use the object returned by the corresponding asynchronous Begin call. Parameter name: asyncResult: at System.Net.Security._SslStream.EndRead (IAsyncResult asyncResult) at?. (IAsyncResult) at System.Net.LazyAsyncResult.Complete (IntPtr userToken) at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) to the System.Net.ContextAwareResult.Complete (IntPtr userToken) at System.Net.LazyAsyncResult.ProtectedInvokeCallback (object result, IntPtr userToken) at System.Net.Sockets.BaseOverlappedAsyncResult.CompletionPortCallback (errorCode, UInt32, UInt32 numBytes, nativeOverlapped NativeOverlapped *) to System.Threading._IOCompletionCallback.PerformIOCompletionCallback (errorCode, UInt32, UInt32 numBytes, NativeOverlapped * pOVERLAP)

It's not a usual mistake. Despite this, try this link to error.

https://social.technet.Microsoft.com/search/en-us?query=NET.Sockets%20based.%20overlapped&AC=4#refinementChanges=&PageNumber=1&showMore=false

Details of youre also treat, try .net cmd, opening type: netsh Winsock reset exit, restart the pc

Please help me how to read this type of XML document that resids in clob
Hello

I am very new to this XML thing in the oracle. My question is I have the XML file that is stored in my table as the clob data type and I want to read this data XML file and insert them into different tables.
We use a server Oracle version 9.2.0.2
Any body can help me how to do this... It is very urgent. Here is the XML file that is stored in the table as a clob column.
<? XML version = "1.0" encoding = "UTF-8"? >
< base = 's1' id >
< WalkList >
< work >
< WalkPath id = "wp1" >
< debug >
< name > < / name >
< language > < / language >
< / debug >
< / WalkPath >
< id Walker = "w1" >
< debug > <!-include only when debug mode is on->
< name > < / name >
< language > < / language >
< / debug >
< / Walker >
< UnidentifiedLocationList >
< UnidentifiedLocation >
< UnidentifiedRFID > < / UnidentifiedRFID >
 
< / UnidentifiedLocation >
< UnidentifiedLocation >
< UnidentifiedRFID > < / UnidentifiedRFID >
 
< / UnidentifiedLocation >
< / UnidentifiedLocationList >
< InspectedLocation id = "l1" > <!-WalkIn freezer->
< > 0 x 00020001 RFID < / RFID >
 25/05/2010 13:44:03 
< debug > <!-include only when debug mode is on->
< name > < / name >
< language > < / language >
< / debug >
< UnidentifiedInspectableItemList >
< UnidentifiedInspectableItem >
< UnidentifiedRFID > < / UnidentifiedRFID >
 
< / UnidentifiedInspectableItem >
< UnidentifiedInspectableItem >
< UnidentifiedRFID > < / UnidentifiedRFID >
 
< / UnidentifiedInspectableItem >
< / UnidentifiedInspectableItemList >
< InspectedItem id = "i1" > <!-example of automatic detection; Temp of freezer->
< InspectedItemDebug > <!-include only when debug mode is on->
< name > < / name >
< language > < / language >
< InspectableCategory >
< id > < / ID >
< name > < / name >
< / InspectableCategory >
< / InspectedItemDebug >
< MeasurementEvent > <!-Doesnot apply to InspectableType - 'Manual of a pick list'->
< > 0 x 00030001 RFID < / RFID >
 25/05/2010 13:45:01 
<! - value only.no units - >
< MeasuredValue > 45 < / MeasuredValue >

< InspectedItemDebug >
< name > < / name >
< language > < / language >
< InspectableCategory >
< id > < / ID >
< name > < / name >
< / InspectableCategory >
< / InspectedItemDebug >
< MeasurementEvent > <!-Doesnot apply to InspectableType - 'Manual of a pick list'->
< RFID > < / RFID >
< UnidentifiedInspectedItemRFID > < / UnidentifiedInspectedItemRFID >
 
< MeasuredValue > < / MeasuredValue > <! - only for manual-sense, meaning automatic and manual-entry types - >
< / MeasurementEvent >
< ValidationEvent id = "v2" > <!-user selects 'No'->
 25/05/2010 13:53:02 
<!-Not < ExceptionCondition > < / ExceptionCondition >->
< / ValidationEvent >
< FollowUpActionEvent id = "f2" >
< FollowUpActionComments > has called the concierge team. Wait for the cleanup.
< / FollowUpActionComments >
 2010-05-25 14:04:43 
< / FollowUpActionEvent >
< ManagerClearanceEvent >
< ManagerRFID > 0 x 00010002 < / ManagerRFID >
< ManagersComments > cleaning confirmed < / ManagersComments >
 25/05/2010 14:06:39 
< / ManagerClearanceEvent >
< / InspectedItem >
< / InspectedLocation >
< / market >
< / WalkList >
< HealthCheckInfo >
< SystemStats >
< AvailableMemory > < / AvailableMemory >
< AvailableDiskSpace > < / AvailableDiskSpace >
< UsedDiskSpace > < / UsedDiskSpace >
< / SystemStats >
< WalkDataUplaod >
< timeStampSinceLastUpload > < / TimeStampSinceLastUpload >
< numberOfFailedUploads > < / NumberOfFailedUploads >
< / WalkDataUplaod >
< storeConfigDownload >
< timeStampSinceLastDownload > < / TimeStampSinceLastDownload >
< numberOfFailedDownloads > < / NumberOfFailedDownloads >
< / storeConfigDownload >
< errors > < / errors >
< StoreConfigXML > < / StoreConfigXML > <!-include only when debug mode is on->
< / HealthCheckInfo >
< / store >
-----

Please help me how to play this file from this column and insert into different tables. Please answer me urgently...

Thanks in advacne.

Sudhakar
Hello

Any body can help me how to do this... It is very urgent. Here is the XML file that is stored in the table as a clob column.

There are many examples here on the forum, you may have found yourself through the search function.
I bet that any Internet search engine could also give useful answers.

Anyway, here's a start with your sample xml (assuming that the document is stored in the column T.DOC):
```
SELECT extractvalue(x1.column_value, 'InspectedLocation/@id') as "ID",
 extractvalue(x1.column_value, 'InspectedLocation/RFID') as "RFID",
 extractvalue(x1.column_value, 'InspectedLocation/EventTimeStamp') as "TIMESTAMP",
 extractvalue(x2.column_value, 'InspectedItem/@id') as "ITEM_ID",
 extractvalue(x2.column_value, 'InspectedItem/MeasurementEvent/RFID') as "ITEM_RFID",
 extractvalue(x2.column_value, 'InspectedItem/MeasurementEvent/MeasuredValue') as "ITEM_VALUE"
FROM t,
 table(
 xmlsequence( extract(xmltype(t.doc), 'Store/WalkList/Walk/InspectedLocation') )
 ) x1,
 table(
 xmlsequence( extract(x1.column_value, 'InspectedLocation/InspectedItem') )
 ) x2
;
```
He breaks some elements of your document into columns and relational rows so that you can just insert directly into your final tables.
Let us know if it does not meet your needs or if you have problems with some fields.

Edit: BluShadow was faster. I'm a slow typist, however...

Published by: odie_63 on 9 July. 2010 11:36

Please help - StdType.picture - I need this object to an activeX control!

Hi, I use an activeX control that has a property that needs a photo.

the problem is that it is not a path to an image.

This is the reference StdType.picture.

I searched the internet for answers, but could not find.

Help, please.

Guy.

Problem solved!

Just look at this Post: "How can I load an image and use it in ActiveX at the time of execution?"

Please help - I don't understand this: because iPad can contain only the content of five Apple ID.

I give my son my iPad.

I try to download Apps on it and I get the message: some of the files in the iTunes Store iTunes library were not copied to the iPad because iPad can contain only the content of five Apple ID.

As far as I know there are only 2 Apple ID involved - my own and the one we did for him as a minor.

If someone has had this problem and can you help me to overcome.

It is typical that this situation happens the day before her birthday - I wanted to give him tomorrow all loaded with his own stuff. It five of its apps accepted last month when I first came with the idea and now...

Anyone?

This means what it means: iTunes Store items are tagged with the Apple that was used to buy ID. Apparently in this case, for some reason, over 5 ID are involved. Which could include accounts that are no longer used.

In general, it is best to follow these steps before giving your iPad to someone else: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

I just opened an account, I'm trying to convert a PDF document into a Word document. Please help, I have to have this done tomorrow for my boss, or else I'll be fired.

I'm trying to convert a PDF doc in a Word document. I have to do before 08:30 tomorrow, Friday, July 1, 2016, otherwise I'll lose my job, someone please help.

You bought subscription?

You try to convert PDF using Acrobat app?

Reference:

Convert PDF to word, PDF to Word Converter doc | Adobe Acrobat DC

Hi I buy chips 4900 rupees today. For the game teen patti app money on my account but not received unlimited chips in play please help cut me as soon as POSSIBLE. Thank you and best regards I am Ashu Khatri

Hi I buy chips 4900 rupees today. For the game teen patti app unlimited

The cut on my account but not received money chips game please help me as soon as POSSIBLE.

Thanks and greetings
Ashu Khatri

Contact the manufacturer of the App or iTunes and ask them about it.

I have an XML file to a TV schedule that I would like to put on their website of Muse. Please help how I can do this.

The link to the XML of the annex is lower.
http://vertrotv.hostedbroadcasting.com/XML/program_schedule_feed?channel_id=1
This link is how it appears on their site that they receive from the program.
Annex

Hi Patrick,

Please refer to: is it possible to import xml into Adobe Muse to fill similar to InDesign content?

Kind regards

Akshay

Cannot connect after the change of DNS. Can someone please provide a non-specific to the connection site url?

I just need a URL to connect to my account and not the site.

Try this url for the connection

http://hl0001.BusinessCatalyst.com/Admin

Let me know if you have any question.

Please help get the logic for this
Hello Frs,

I need like if a number is a whole number divide by 100, otherwise if we number integer (for ex 500.23) then leave it as it is how to write a logic to find out if a number is integer or not?

I need to write a function similar to the following

Begin
If invoice_amount = 500 (integer)
then a = invoice_amount/100;
on the other
a = invoice_amount;
end if;
return a;
end;

If anyone has idea pls help

Thank you
Marilou
Hello

You can do this in SQL by using the CASE statement.
For example:
```
SELECT  CASE            WHEN  invoice_amount = TRUNC (invoice_amount)            THEN  invloce_amount / 100            ELSE  invoice_amount        END     AS a...
```

The bottom of the window has this thick grey bar, almost a thick band... He has no response to mouse clicks, etc. and I can't get rid of it; It remains lit even in mode full screen. Please help me get rid of this...

Here is a picture of the show to help you see the problem easily.

Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
- https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

I do not have a disk for my computer and want to restart is back to the way I bought, please help how can I do this

Hello

my partner has a computer laptop bieng a complete spaz when buying said computer laptop did not come with a disk or a backup appeared basically does anyone know how I reboot back to when my partner bought so we can start all over again

laptop is a Toshiba satellite operating system windows vista Home premium

Hello

With a Toshiba, if you do not have to purchase recovery disc, there will be a disk to reinstall Vista from recovery Partition.

You press 0 (zero) to the starting power / and follow the instructions of Toshiba to reinstall back to the factory settings.

There are several methods to reinstall Vista, you may be interested.

There is no Windows Vista downloads available from Microsoft.

You can contact your computer manufacturer and ask them to send you a set of recovery disks.

They should do this for a small fee.

To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

How to change the Boot order in BIOS:

http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

"How to replace Microsoft software or hardware, order service packs and replace product manuals.

http://support.Microsoft.com/kb/326246

And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

Ask them to the proper key sequence.

And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

Some manufacturers have more available Vista recovery disks.

If this happens, you may need to try this instead:

You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

Other manufacturers recovery DVDs are should not be used for this purpose.

And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

"How to do a clean install and configure with a full Version of Vista '

http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

And phone Activation may be necessary when you use the above installation method.

"How to activate Vista normally and by Activation of the phone '

http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

See you soon.

I get an error on RMAN, please help, I'm new on this

I get the error message
RMAN-03009: faliure of backup command on 13/02/14 channel ORA_DISK_1
ORA-19504: cannot create the file '\APP\AHMED\FLASH_RECOVERY_AREA\TESTDB\BACKUPS '.
ORA-27038: created file already exits
OSD-04010: < create > option specified, folder already outputs

I think your problem is that the file that you tried to create already exists ("\APP\AHMED\FLASH_RECOVERY_AREA\TESTDB\BACKUPS\")

so more commands to do this, before taking a full backup of database

Configure the format of disc type peripheral canal "\APP\AHMED\FLASH_RECOVERY_AREA\TESTDB\BACKUPS\backup_%U.bkf";

-% you will be replaced by unique file names

or

Configure the format of disc type peripheral canal "\APP\AHMED\FLASH_RECOVERY_AREA\TESTDB\BACKUPS\backup_%t_s%s_s%p";

The %t format specifier is replaced with a timestamp of four bytes and %s with the defined number of backup %p with the number of the backup piece.

Ref:

ORA-27038 errors during the backup, RMAN: ORA-19504 when a Backupset is in Place (Doc ID 1082911.6)

Thank you

Renu

Please help (IN NON-GEEK SPEAK!) «This connection is untrusted you asked Firefox to connect safely to my.ferris.edu, but we cannot confirm that your c...»

Similar Questions

This has happened

Maybe you are looking for