Please help me on the jdeveloper to weblogic application deployment

At the beginning I just thought after developing an adf application then just deploy as an .ear file and deploy it in the weblogic console and everything will be ok. But actually I had a lot of problems. Then I had a tutorial for it and I do what he says step by step, but some new problems occurred. This is the tutorial I mentioned: [how-to: ADF Deployment Guide | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]

Now, could someone tell how did deploy your adf application?

Here are the errors I got.

It's the packege of installation and the operating system I use:
1. 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr centOS (the package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip) [and earlier, I used a solaris11 of oracle vm and install jdeveloper11.1.2.3, the same probem occurred as CentOS.]
2 Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above

Here are the problems I get:
in case 1, after that I installed the jdeveloper (using the sun jdk 1.7), the weblogic seems to be fine but I na not configure a domain. But after I opened a
request (which I get from the oracle jdeveloper tutorial demo, which works well in my Win7 env) and I run it, the integrated weblogic can not get
has started. First in the console it says identifier jrocket - is not recognized, then I edit the setDomainEnv.sh and the startWebLogic.sh file in the
integrated wls area (that of the Director of .jdeveloper) to assign to the variable JAVA_VM - server. After that another problem emerged: when the
WLS goes to the 'start-up' status, it is blocked and I turn to System Monitor shows only a thread of java using more than 1 GB of memory in my system
and occupy 150% of my cpu (it's a dual-core computer). I wait about 5 minutes, when an error came up said "PermSize is too small".so I change the
setDomainEnv.sh file to set the PermSize be 1024 m and MaxPermSize to 2048. (the name of the variable is something like that, maybe not the)
exactly on time. "I think you can understand that one is). But the problem is still there.

then in 2 cases in the first place the jdev and integrated wls works fine, but when I deploy an application that works well in one ear of the file, and then deploy it to a
WLS (10.3.5) autonomous it never Works.the dumb mistake is something libraries of reference/dependencies was not found. Then I tried again a server connection to
the autonomous wls and I got the tutorial [how_to_deploy_adf | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html], as the tutorial says I my standalone patch
WLS with adr and everything is fine, no error reported. Then I tried the new server in the new slot machine the adminserver management and apply the
the ADF model in him will overload / console em. But after I restarted the new server (by the console, and then by file stop + startweblogic.bat) the server is running
the application in the new server is just 'not available '. I tried for three times in three computer, two of them are running win7, it runs Windows XP.

I don't know what the problem is and I'm quite a beginner on this subject. Someone help me please. Thank you very much!

respect, Neo.

Neo,
There are a few problems. First of all, jdev comes with its own jdk provided in the product (jdk 1.6_x). The next thing is that if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 and 10.3.6 where you need to install the appropriate on runtime. In your case, you first install adf runtime 11.1.1.6.0 and then you need to install two patches that update the adf to 11.1.2.3.0 life. These husks are only available through support.oracle.com, which means that you need a support contract to get.
More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
The rest of your problems disappear once you have installed the adf right on your server runtime.

Timo

Tags: Java

Similar Questions

  • Impossible to deploy the Jdeveloper to Weblogic application!

    [14: 36:19] WebLogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: the source "c:\temp\webapp1.war" for the "webapp1" application could not be loaded on the server ' http://172.16.9.43:80/bea_wls_deployment_internal/DeploymentService.
    Server returned HTTP response code: 407 for URL: http://172.16.9.43:80/bea_wls_deployment_internal/DeploymentService

    Why jdeveloper try find file. WAR in c:\temp when in the deployment profile properties WAR - "C:\jtest\mywork\Application1\Project1\deploy\webapp1.war" file
    I find the wl_comp1472137365997981357.jar file that contains app\webapp1.war in c:\temp

    I have a problem after reinstalling JDeveloper and Weblogic.
    How to solve this problem?

    What version of JDeveloper and WLS?
    How you try to deploy (from the WLS console, JDeveloper, etc.)?
    You have a proxy between you and the WLS Server? (HTTP 407 means that the proxy server login)

    John

  • My 5s iphone is updated to 9.3.1 now it showing an error while it controls for software update. Error is "cannot verify the update ' so please help me solve the error

    Please help me solve the error message

    Connect the phone to a computer running iTunes 12.3.3 or later, with a cable and try check update

  • someone please help me restore the photos deleted from my camera sony cybershot

    someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored

    N ° when the photos are removed from the Flash of the camera, they are gone.

    If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.

  • HP Pavilion G6 2323sx: Please help me for the missing driver of my laptop. (acpi\hpq0004\3 & 11583659 & 0)

    Dear Sir / Maam,.

    Please help me find the driver for the unknown device from my laptop.

    Model HP 2323sx G6

    Operating system Windows 8.1 (64-bit)

    Unknown Device acpi\hpq0004\3 & 11583659 & 0

    Thanks in advace.

    Hello:

    You need this driver...

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

  • Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. Thank you.

    Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. I had downloaded new software I wanted to delete and that which the sound bus (I think that's what it was called was another program added with this software, it is a blue icon) I feel stupid, but really would like help getting the sound back on my computer. I have Windows XP Professional. Thank you.

    Hi Rhonda327,

    Check if an error code is listed in the Device Manager:

    a. Click Start, click Run and then type devmgmt.msc

    b. expand sound, video and game controllers

    c. double-click the sub element

    1. run the system restore. Restore the system to the date when it was working fine. You can check the link for the steps below: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

    2. you can also run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us

    Check out the links that gives you information about the installation of drivers from the manufacturer's Web site and also not to know the manufacturer or the supplier of the device below.

    Link:

    How to update a sound card driver in Windows Vista and Windows XP:http://support.microsoft.com/kb/166774

    Add the above suggestions, you can alos use windows update to install the drivers for the device. Link, please refer to:http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsxp.mspx

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Can someone please help to get the drivers/utilities on my Sony laptop to my bluetooth stack?

    Toshiba bluetooth stack, Sony & Windows 7

    "To continue or not to continue the reinstallation of the Toshibas enigma -" Toshiba bluetooth stack "-on a Windows 7 Pro upgrade Vista Pro.

    After a clean install, I lost my beautiful environment of Bluetooth on my laptop Sony vgn-bx51-vn in 2005 (a laptop that is like finding teeth of chicken on the Sony site).  I did a smart thing to keep the "Toshiba" Bluetooth file when I finally removed the windows.old folder after the re-installation.  Only smart because it allowed me to compare models with a pilot of 'original' newly downloaded and files utility (including msi files) Sony - the result was that there are a lot of files that is different.

    They newly installed drivers grumble horribly subject knowing incompatabilities with Win 7 (which is just a skin on top of Vista... or so I thought) and refuse to carry you.  They subsequently take you to Toshiba where you end by abandon the search for any useful help in spite of being a good faith user - no?

    Cut to the Chase.  Can someone please help to get the drivers/utilities on my Sony notebook by hook or crook.  NB. I hope just to aspire to the use of Bluetooth for something useful someday but am also irritated by the cul-de-sac which is software policy.

    Thank you very much - I.

    Ok.

    I mentioned that I had 2 problems - no Wifi and no BT.

    Wifi driver here http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2259&DwnldID=20790&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Centrino%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+PRO%2fWireless+3945ABG+Network+Connectioneng#help

    And here's the fix for BT http://mikescloset.blogspot.co.uk/2011/12/dell-toshiba-bluetooth-350-and-windows.html

    Credit to Mike for the intelligent correction.

  • Please, help to recover the BIOS on the dv7-4120er (xe276ea)

    Please, help to recover the BIOS on the dv7-4120er (xe276ea).

    I updated my BIOS, but now the screen is off.

    I have no HP_TOOLS of recovery on the HARD drive partition and I did not backup usb with BIOS.

    How can I recover my BIOS?

    Please help me.

    Please see HP Notebook PC - Restore the BIOS, which States that you may be able to create a 'USB key with a HP_TOOLS volume' to Flash the BIOS. Please see http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-use-the-HP-BIOS-update-uefi-utility/... for step by step instructions that can be used to create the 'USB key with a HP_TOOLS volume '. You may be able to skip 'step 4 '. Please see the HP Pavilion dv7-4120er Entertainment Notebook PC drivers page for the appropriate download needed for this procedure.

    Updated HP Notebook System BIOS (Intel processors)

    HP System Diagnostics UEFI

    HP Unified Extensible Firmware Interface (UEFI) support environment

    HP update BIOS UEFI

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Please help me correct the printer prints in code

    Please help me correct the printer prints in code

    Hi, Vicky,

    Printer make a model, please.

    Did the firmware update?  Visit the site of the manufacturer of the printer for the updates.

    Right click on my computer

    Click on manage

    Click on Device Manager

    Click on the + sign next to the printer

    Right-click on the item in the menu drop down and select uninstall

    Restart your computer and try printing again

    Look for updates on the manufacturer's website.

  • HP Pavilion g6: Please help me remove the Power On password or administrator password

    Please help me remove the administrator password or power on password. The stop code is: 68478111

    Hello:

    Please see the info on the link below which should solve your dilemma.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/m-p/5010033

  • Have inadvertently made my banks logo my background on my table, please help, not found the answer anywhere.

    Have inadvertently made my banks logo my background on my table, please help, not found the answer anywhere.

    Hello

    See if this helps you:

    "Change your desktop background (wallpaper).

    http://Windows.Microsoft.com/en-us/Windows/change-desktop-background-wallpaper#1TC=Windows-7

    See you soon.

  • Please help me choose the right format mask

    Hello everyone.

    We use Oracle 11.1.0.7 RAC.

    Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

    NUMBER VARCHAR2

    0,123 0.123

    12345678-12345678

    12345678.1234 12345678.1234

    12345678.123 12345678.123

    12.00000008 12.00000008

    WITH data AS
            (SELECT 0.123 n FROM DUAL
             UNION ALL
             SELECT 12345678 FROM DUAL
             UNION ALL
             SELECT 12345678.1234 FROM DUAL
             UNION ALL
             SELECT 12345678.123 FROM DUAL
             UNION ALL
             SELECT 12.00000008 FROM DUAL)
    SELECT
         TO_CHAR (n)
    FROM
         data;
    

    Thank you, Dmitry.

    Hi, Dmitri,

    Dmitry Dunaev wrote:

    Hello everyone.

    We use Oracle 11.1.0.7 RAC.

    Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

    NUMBER VARCHAR2

    0,123 0.123

    12345678-12345678

    12345678.1234 12345678.1234

    12345678.123 12345678.123

    12.00000008 12.00000008

    1. WITH the data AS
    2. (SELECT 0,123 n FROM DUAL)
    3. UNION ALL
    4. 12345678 SELECT FROM DUAL
    5. UNION ALL
    6. SELECT 12345678.1234 FROM DUAL
    7. UNION ALL
    8. SELECT 12345678.123 FROM DUAL
    9. UNION ALL
    10. SELECT THE DOUBLE 12.00000008)
    11. SELECT
    12. To_char (n)
    13. Of
    14. data;

    Thank you, Dmitry.

    I don't think that TO_CHAR can do by itself.  You should maybe call TO_CHAR and then manipulate the output a bit.

    Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'.  So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:

    WITH got_str AS

    (

    SELECT n

    TO_CHAR (n) AS str

    FROM the data

    )

    SELECT n

    CASE

    WHAT LIKES str '. %'

    THEN "0". Str

    Of ANOTHER str

    END AS str0

    OF got_str

    ;

    Output:

    STR0 N

    ---------- -----------------------------------------

    0,123.123

    12345678-12345678

    12345678.1 12345678.1234

    12345678.1 12345678.123

    12.0000001 12.00000008

    What do you want for greater than-1 negative numbers?  You may need to make the CASE a little more complicated expression, like this:

    WITH got_str AS

    (

    SELECT n

    TO_CHAR (n) AS str

    FROM the data

    )

    SELECT n

    CASE

    WHAT LIKES str '. %'

    THEN "0". Str

    WHEN the str LIKE '. %'

    THEN '-0 "|" SUBSTR (str, 2)

    Of ANOTHER str

    END AS str0

    OF got_str

    ;

  • Please help to read the XML with XMLTable

    Hi gurus,

    I'm not very familiar with XML parsing. It seems to me that it should be very easy to get the data. For some reason, I'm having a problem to get the data.

    SELECT *.
    OF e util.hlsr_online_entries,.
    XMLTABLE)
    XmlNamespaces)
       ' http://tempuri.org/ '    as "dt",
    ("urn: schemas-microsoft-com: XML-diffgram-v1" as "dg").

    "/ DataTable / dg:diffgram/DocumentElement/JrShowCustomerHeifers.
    PASSAGE XMLTYPE (e.entry_data)
    COLUMNS
    SeqNo TO the ORDINALITE,
    DocumentID NUMBER PATH "DocumentID",.
    PATH of VARCHAR2 (100) ClubName "ClubName") as test
    WHERE e.ref_id = 33422

    The query above does all the data for me. My hunts is the problem with the tab DocumentElement. I tried a different variant management.

    Please help me to resolve the application

    I have the XML document following the DotNet developer

    <? XML version = "1.0" encoding = "utf-8"? >

    " < DataTable xmlns =" http://tempuri.org/ ">

    < xs: Schema id = "NewDataSet" xmlns = "" "xmlns: XS =" " http://www.w3.org/2001/XMLSchema " "xmlns:msdata ="urn: schemas-microsoft-com: xml-msdata" >

    < xs: element name = "NewDataSet" msdata:IsDataSet = "true" msdata:MainDataTable = "JrShowCustomerHeifers" msdata:UseCurrentLocale = "true" >

    < xs: complexType >

    < xs: Choice minOccurs = "0" maxOccurs = "unbounded" >

    < xs: element name = "JrShowCustomerHeifers" >

    < xs: complexType >

    < xs: SEQUENCE >

    < xs: element name = "DocumentID" type = "xs: int" minOccurs = "0" / >

    < xs: element name = "ClubName" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Name" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "FirstName" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "PreferredName" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Email" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Exhibitor" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "AnimalName" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "RegistryNo" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "DateofBirth" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "NameofSire" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "SireRegistryNo" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "NameofDam" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "DamRegistryNo" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Tattoo" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "SecondaryTattoo" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "UniversalIDNumber" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Tattoo_Location" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "Secondary_Tattoo_Location" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "OracleBreedID" type = "xs: int" minOccurs = "0" / >

    < xs: element name = "JrValidationBreedName" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "ValidationDate" type = "xs: DateTime" minOccurs = "0" / >

    < xs: element name = "ValidatedBy" type = "xs: String" minOccurs = "0" / >

    < xs: element name = "ValidationComment" type = "xs: String" minOccurs = "0" / >

    < / xs: SEQUENCE >

    < / xs: complexType >

    < / xs: element >

    < / xs: Choice >

    < / xs: complexType >

    < / xs: element >

    < / xs: Schema >

    < xmlns:msdata = diffgr:diffgram "" urn: schemas-microsoft-com: xml-msdata "xmlns:diffgr =" urn: schemas-microsoft-com: XML-diffgram-v1 ">"

    < DocumentElement xmlns = "" >

    < JrShowCustomerHeifers diffgr: ID = "JrShowCustomerHeifers1" msdata:rowOrder = "0" >

    < > 18442 DocumentID < / DocumentID >

    < ClubName > Perrin FFA < / ClubName >

    Hamman < name > < / LastName >

    < FirstName > Charles < / name >

    < email > [email protected] < / email >

    < setting > hammam, Charles < / Exhibitor >

    < > 113 AnimalName < / AnimalName >

    < RegistryNo > C1026447 < / RegistryNo >

    < DateofBirth > 14/01/2013 < / DateofBirth >

    < NameofSire > 808 808 DAYS of MATCH LH < / NameofSire >

    < SireRegistryNo > C961101 < / SireRegistryNo >

    SADIE 7/7 < NameofDam > < / NameofDam >

    < DamRegistryNo > C941067 < / DamRegistryNo >

    < > 113 tattoo < / tattoo >

    < SecondaryTattoo / >

    < UniversalIDNumber > 1194F020 < / UniversalIDNumber >

    < Tattoo_Location > TATTOO - left ear < / Tattoo_Location >

    < Secondary_Tattoo_Location / >

    < OracleBreedID > 6383 < / OracleBreedID >

    Beefmaster < JrValidationBreedName > < / JrValidationBreedName >

    < ValidationDate > 2014-11-25T 08: 39:00 - 06:00 < / ValidationDate >

    < ValidatedBy > laineyb < / ValidatedBy >

    < ValidationComment / >

    < / JrShowCustomerHeifers >

    < JrShowCustomerHeifers diffgr: ID = "JrShowCustomerHeifers2" msdata:rowOrder = "1" >

    < > 18473 DocumentID < / DocumentID >

    < ClubName > Perrin FFA < / ClubName >

    Hamman < name > < / LastName >

    < FirstName > Charles < / name >

    < email > [email protected] < / email >

    < setting > hammam, Charles < / Exhibitor >

    < AnimalName > PURPLE CORALEE 349 KPH < / AnimalName >

    < RegistryNo > P43461953 < / RegistryNo >

    < DateofBirth > 04/11/2013 < / DateofBirth >

    < NameofSire > PURPLE MOXY 22 X AND < / NameofSire >

    < SireRegistryNo > P43126458 < / SireRegistryNo >

    < NameofDam > TCC CORKY 6603 < / NameofDam >

    < DamRegistryNo > P42457119 < / DamRegistryNo >

    < > 349 tattoo < / tattoo >

    < SecondaryTattoo > km/h < / SecondaryTattoo >

    < UniversalIDNumber > 1194F021 < / UniversalIDNumber >

    < Tattoo_Location > TATTOO - left ear < / Tattoo_Location >

    < Secondary_Tattoo_Location > TATTOO - right ear < / Secondary_Tattoo_Location >

    < OracleBreedID > 6389 < / OracleBreedID >

    < JrValidationBreedName > Polled Hereford < / JrValidationBreedName >

    < ValidationDate > 2014 - 12-01 T 11: 55:00 - 06:00 < / ValidationDate >

    Hannah < ValidatedBy > < / ValidatedBy >

    < ValidationComment / >

    < / JrShowCustomerHeifers >

    < JrShowCustomerHeifers diffgr: ID = "JrShowCustomerHeifers3" msdata:rowOrder = "2" >

    < > 18474 DocumentID < / DocumentID >

    < ClubName > Perrin FFA < / ClubName >

    Hamman < name > < / LastName >

    < FirstName > Charles < / name >

    < email > [email protected] < / email >

    < setting > hammam, Charles < / Exhibitor >

    < AnimalName > LANGFORDS SWEET N SOUR 4107 < / AnimalName >

    < RegistryNo > 43504761 < / RegistryNo >

    < DateofBirth > 02/03/2014 < / DateofBirth >

    < NameofSire > LH TNT 1017 < / NameofSire >

    < SireRegistryNo > 43199794 < / SireRegistryNo >

    < NameofDam > LANGFORDS LADY 2206 AND < / NameofDam >

    < DamRegistryNo > 43315143 < / DamRegistryNo >

    < > 4107 tattoo < / tattoo >

    < SecondaryTattoo / >

    < UniversalIDNumber > 1194F018 < / UniversalIDNumber >

    < Tattoo_Location > TATTOO - left ear < / Tattoo_Location >

    < Secondary_Tattoo_Location / >

    < OracleBreedID > 6398 < / OracleBreedID >

    Hereford < JrValidationBreedName > < / JrValidationBreedName >

    < ValidationDate > 2014-11-24T 14:26:00 - 06:00 < / ValidationDate >

    Validator < ValidatedBy > < / ValidatedBy >

    < ValidationComment / >

    < / JrShowCustomerHeifers >

    < JrShowCustomerHeifers diffgr: ID = "JrShowCustomerHeifers4" msdata:rowOrder = "3" >

    < > 18475 DocumentID < / DocumentID >

    < ClubName > Perrin FFA < / ClubName >

    Hamman < name > < / LastName >

    < FirstName > Charles < / name >

    < email > [email protected] < / email >

    < setting > hammam, Charles < / Exhibitor >

    < AnimalName > PURPLE CCC 19A LYDIA < / AnimalName >

    < RegistryNo > P43406978 < / RegistryNo >

    < DateofBirth > 05/02/2013 < / DateofBirth >

    < NameofSire > PURPLE MB WOMANIZER 14UET < / NameofSire >

    < SireRegistryNo > P42945146 < / SireRegistryNo >

    < NameofDam > PURPLE CMCC NASTIA 9U < / NameofDam >

    < DamRegistryNo > P42927201 < / DamRegistryNo >

    < > 19A tattoo < / tattoo >

    < SecondaryTattoo / >

    < UniversalIDNumber > 1194F017 < / UniversalIDNumber >

    < Tattoo_Location > TATTOO - left ear < / Tattoo_Location >

    < Secondary_Tattoo_Location / >

    < OracleBreedID > 6389 < / OracleBreedID >

    < JrValidationBreedName > Polled Hereford < / JrValidationBreedName >

    < ValidationDate > 2014 - 12-01 T 11: 55:00 - 06:00 < / ValidationDate >

    Hannah < ValidatedBy > < / ValidatedBy >

    < ValidationComment / >

    < / JrShowCustomerHeifers >

    < JrShowCustomerHeifers diffgr: ID = "JrShowCustomerHeifers5" msdata:rowOrder = "4" >

    < > 18477 DocumentID < / DocumentID >

    < ClubName > Perrin FFA < / ClubName >

    Hamman < name > < / LastName >

    < FirstName > Charles < / name >

    < email > [email protected] < / email >

    < setting > hammam, Charles < / Exhibitor >

    < AnimalName > PURPLE SGW EDEN 12 b < / AnimalName >

    < RegistryNo > P43521932 < / RegistryNo >

    < DateofBirth > 02/04/2014 < / DateofBirth >

    < NameofSire > first TIME's a WASTINe 0124 < / NameofSire >

    < SireRegistryNo > 43123163 < / SireRegistryNo >

    < NameofDam > PURPLE SM WONDER WOMAN 160Y < / NameofDam >

    < DamRegistryNo > P43235169 < / DamRegistryNo >

    < tattoo > 12 b < / tattoo >

    < SecondaryTattoo > 12 b < / SecondaryTattoo >

    < UniversalIDNumber > 1194F015 < / UniversalIDNumber >

    < Tattoo_Location > TATTOO - left ear < / Tattoo_Location >

    < Secondary_Tattoo_Location > TATTOO - right ear < / Secondary_Tattoo_Location >

    < OracleBreedID > 6389 < / OracleBreedID >

    < JrValidationBreedName > Polled Hereford < / JrValidationBreedName >

    < ValidationDate > 2014 - 12-01 T 11: 56:00 - 06:00 < / ValidationDate >

    Hannah < ValidatedBy > < / ValidatedBy >

    < ValidationComment / >

    < / JrShowCustomerHeifers >

    < / DocumentElement >

    < / diffgr:diffgram >

    < / DataTable >

    user12021633 wrote:

    Regarding your suggestion, I've never used the syntax of FLWOR. I'll try to implement if I can make it work.

    "FLWOR is the abbreviation of ' for Let's where Order by Return" and refers to the full form of an XQuery query expression.

    Do you think it would be faster than the way I have the values?

    You have used a FLWOR expression (the 'for' + 'return' part of it) in this post: Re: Please help to read the XML with XMLTable

    And I have already said: do not use in this case.

    Faster or slower isn't the point. Oracle will evaluate the expression in the same way.

    But from a maintenance point of view, it's obviously much easier to use a simple XPath expression like this:

    /DT:GetJrShowCustomerHeifersResponse / dt:GetJrShowCustomerHeifersResult / dg:diffgram/DocumentElement/JrShowCustomerHeifers

  • Please help to cancel the subscription to Premiere Pro duplicate

    Hi Please help to cancel the one subscriptions to the Premiere Pro due to the extra double subscriptions because of the delay of payment. My ID REMOVED I thank you in advance

    [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

    [This is an open forum, not the Adobe support, please do not post personal information]

    Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  • Please help me fix the script

    I try to write a script by my slef but not work

    app.findGrepPreferencest = firstLineIndent:8, leftIndent:8;

    app.changeGrepPreferences = firstLineIndent:8, leftIndent:16;

    app.changeGrep ();

    app.findGrepPreferences = app.changeGrepPreferences = null;

    Can someone please help me fix the script, please.

    Hello

    Try this.

    app.findGrepPreferences = app.changeGrepPreferences = null;

    app.findGrepPreferences.firstLineIndent = '8 ';

    app.findGrepPreferences.leftIndent = '8 ';

    app.changeGrepPreferences.firstLineIndent = '8 ';

    app.changeGrepPreferences.leftIndent = "16pt;

    app.changeGrep ();

    app.findGrepPreferences = app.changeGrepPreferences = null;

    Kind regards

    Cognet

Maybe you are looking for

  • X 60-installation of Window XP - receive the tracking error

    Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Any ideas on how

  • Pavillion Sleekbook 14-b110us: controller Univsersal Serial Bus (USB) driver

    I have installed Windows 7 (64 - bit) on my Pavillion Sleekbook 14-b110us. But the problem is that this laptop originally installed window 8 by HP. This is why all the drivers are not available for Windows 7 by HP. I installed by my self with a compo

  • HP 7520 all in a print queue

    A month ago, I bought a new 7520, then broke a piece hurrying to fix a paper jam in the middle of printing several important documents.  No problem, back to Best Buy with protection plan and is back with a new, identical machine.  Now, I can't print

  • Inspiron 14 7000 series Subwoofer

    Hello This model has a built in subwoofer. The only way works the subwoofer is if I get the default speaker but then the normal speakers do not work. is not the box that is supposed to work with normal speakers?

  • BlackBerry Smartphones how can I send an MMS message?

    When I had the 5.0 OS on my Bold 9650 I could send messages MMS (messages with more than 160 characters). After I have updated to OS 6.0 I can send only messages SMS (messages with less than 160 characters). How can I send a text message with more th