Please help me with my Apple Airport Extreme

Similar Questions

• Please help me with my apple ID

  I changed my email address and created a new apple ID with my new email address. Now whenever I want to update my software, it comes up with my old address and will not let me update. How can I solve this problem.

  Thank you

  Irene

  Creating a new Apple ID is not the way to handle a new e-mail address.

  Change the email address that you use for your Apple-ID

  http://support.Apple.com/kb/HT5621

  Now, because you used the new email address to create a new Apple ID, you cannot use old Apple ID.

  The contents of the iTunes and Mac App Store are allowed to the Apple ID. The Apple ID is embedded in the licensed copy you download. It's in his DNA. Apple will not transfer the contents of one Apple ID to another. Apple will not merge two Apple ID.

  Unless you can get another new email address to use to follow the steps described in the link above, the only option is to delte everything bought with the old Apple ID and buy again with new Apple ID.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

• ARE remote with Apple Airport Extreme router wireless

  Hi all! I'm controlling my DA5800 STR using the Remote ES app but neither my iOS device sees the receiver OR my Sony Android Tablet S. So I figure it must be the network set up. I use a cable modem Motorola connected to an Apple Airport Extreme via an ethernet cable. The receiver is connected to the router, as shown in the manual.

  I'm doing something wrong here?

  Thanks in advance for any help!

  Hello Sandiegodom,

  Please check the network settings on the receiver ARE and confirm that the 'external control' is active, as well as the "relief network" that will allow the application ARE the 'waking up' the unit from standby mode.

  Also check that your phone is connected to the same wireless network, and IP addresses of the phone and the receiver are in the same subnet / IP Range. UpNp must also be enabled in the settings of the router.

  If you have verifed that these settings are correct, then the question is perhaps with the router where it does not send data to the local discovery of uPnP network devices. A simple power reset or resetting the router will sometimes force the router to send back data and should fix the problem if that is the case.

• HP Photosmart C4795 with Apple Airport Extreme Wireless router - cable PC problem

  Hello

  I searched, but I can't quite find an exact match for my problem.

  I have a new HP desktop computer running Windows 7, and I attach it to my wireless router which is an Apple Airport Extreme.  I have attached my HP C4795 printer to the USB port on the * router *.  In theory, the USB key should pass through, so that the office will think it's a printer "connected", while also allowing us to print remotely from our laptops (via the router).

  Unfortunately, while portable computers can print wireless very well, the * office * Guard 'lose' the printer, thinking that it is in offline mode.  Even when it shows 'online' (after my relocation via "Add a printer"), still error-out print jobs.

  Can someone help me understand how this works?  The printer works fine, btw, if I disconnect the USB cable between the router and plug directly to the PC, if it isn't something directly with the printer or the desktop, but rather the * combination * of running through the Apple Airport Extreme router.

  Thank you

  Terry

  Thank you, once again, Jim.

  I think I have stumbled on the solution.  I did a reading online on Apple application 'Hello', and how he felt necessary for Apple devices, like the airport, knit with device sharing.  I forgot that the installation of the airport disk had said something Hello installation, but I discovered on my Wired HP Win 7 PC menu programs, called 'Hello Printer Utility' or something, and I launched it, selected the C4795 in the dialog box, and all seems to be put in place (i.e. the printer suddenly showed as 'online' and I could print from my desktop wired as well as wireless laptop).

  Success!

  Thanks for all your help on this.  Now, all I need is to get my WD My Book external/sharing the hard drive to work as well!  Unfortunately, I do not see here a "Hello Hard Disk Utility", but I feel somehow that morning will be the answer.  I just understand it.

  Thank you

  Terry

• Photosmart more B209a-m does not connect with apple airport extreme base station

  I use the B209a-m wireless with a netgear router OS6.  I just changed the Netgear to an apple Airport Extreme router.  All my other hardware connected successfully with the new router but the B209a-m says "no connection found."  I know the printer is well within the router.  I have reset the factory settings on the printer.  I've disabled the system and restarted.  None of this has worked.  Suggestions?

  Hello

  You should not connect it to the airport.

  You must connect the printer with a USB port on your Mac, then run the HP installation wizard.

  From there, you will be guided to provifde the details needed to establish the connection between the printer and Airport Extreme wireless.

  Once the process will be completed and set up the wifi connection you will be guided to unplug the USB.

  You must use a USB cable high speed standard, not longer than 2 m in length.

  The square end must be connected to the USB port located at the back of the printer:

  

• SG300 combination with Apple AirPort Extreme

  Hello

  I recently bought a SG300 series switch. I want to connect my internet connection in a port of the switch and connect my Apple AirPort Extreme in the switch. So I want that all my other ports on the switch to be put to rout by the airport. Connection Internet and airport to the switch gives you access to the Internet for all wireless clients connected to it. But no switch ports can ping from the airport.

  How can I configure this as simple as possible?

  What I've done so far is to switch the L3 and nothing else. With nothing has changed from the default settings, I was expecting unrestricted access between ports, but appears not to be the case.

  It's my first time, so I expect that it's probably a simple problem.

  I hope someone can point me in the right direction.

  Thank you in advance.

  FR. Lars

  Lars salvation,

  I don't know what is the idea behind connection WAN and LAN to SG300. Is it because you have a single switch, but would need two?

  Also I am not aware how the airport works. Not NAT?

  To add a static route you must navigate Configuration IP--> IP--> Routes IPv4 interfaces and management

  Destination must be 0.0.0.0 IP prefix also 0.0.0.0 if this static route so to access internet.

  Kind regards

  Aleksandra

• Problem with SlingTV through Airport Extreme?

  I have a Motorola SB6141 cable modem, internet of Time Warner and an Apple Airport Extreme Base Station (later) for my setup. While SlingTV is not a great service, it was $ 20 a month and gave me what I need and has been much better than that Time Warner was in charge me for the same channels.

  Despite the problems of freezing SlingTVs or what not, for a while it worked. But one day a few months back it just stopped working. When you open the app, it either does not open or just turns and turns to be forgotten and never access the content. But if I try on my phone (Verizon LTE), or another network outside my apartment with the iPad or computer laptop, it works. So at home, I tried to go directly from the cable modem and right in the Apple TV (previously an Xbox) and when I do that it works. So really what it boils down to, is my Apple Airport Extreme Base Station router. If I'm either directly connected to the Airport Extreme Base Station (Apple TV ethernet to the router), it will not work, or if I use WiFi via the Apple Airport Extreme Base Station it will not work. But directly to the modem cable or on any network outside of my home, the service works.

  So in short, something about setting up Apple isn't allowing the Sling TV app to open or work on any device. I even did a rest of the plant and installing my Apple router once again, and the same problem persists.

  FYI - I use Netflix, Amazon Prime, Hulu and all the Apple TV, TV shows, rental movies and content without ever having a problem with opening or streaming. This only happens with SlingTV when you try to access content on any device (iPad, Apple TV, Xbox One, iPhone, Macbook Air) via WiFi or Ethernet via Apple Airport Extreme.

  I tried to provide all the little details that I could. If someone could please provide a solution I would really really appreciate it! Thank you.

  Well first of all try to port forwarding. Slingbox I guess would use a similar to SlingTV montage... Unfortunately when I google for it I see just people having so many questions like you... no rigging, no answer they give up.

  http://PortForward.com/English/routers/port_forwarding/Apple/AirPortExtreme/Slin gBox.htm

  It is the old airport of model, but the idea is correct.

  If you still have questions... There is a major problem... port 5001 is used by the airport for its installation...

  If I run a scan of port of network utility, that you will find that it is already used.

  Port scan started...

  Host port scan: 192.168.2.201

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5009 winfs

  Port scan has completed...

  My recommendation is to replace the airport as your main router... Something good market like the C5 TP-Link or the WR1043ND which is less than $50US. These routers use UPNP is missing on the airport. Continue to use the airport for your customers to apple as WAP and switch.

  BTW: this is no bad thing because you also have a known problematic modem... SB6121 and SB6141 have major problems... do a quick search and you can find a lot of posts about this.

  TWC has also now use IPv6... that can ruin.

  See the instructions for installation (same as comcast for TWC).

  http://mydeviceinfo.Xfinity.com/download.php?file_id=35

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• Mesh Wifi LAN with hardware Apple Airport?

  I read recently about the benefits of wifi mesh networks. I looked at several highly rated router mesh systems; but I don't know if I could not do the same with a system based on Apple Airport extreme and several Apple Airport Express routers.  Does anyone have an idea on the advantages/disadvantages of each approach?

  Trick question that depends on what you mean by "mesh".

  It is not difficult to set up a "roving" network with Apple devices, which is a form of network "mesh".  All airports using the same name of the wireless network, the same level of wireless security and the same password.

  The theory with this type of configuration is that wireless devices can "switch" from one region to the other and still stay connected to the same network as they change to take the best signal from the nearest airport.

  Usually, it works pretty well with the Apple laptops.  But not so well for not at all with most of the PCs, iPhones, iPads and other mobile devices... a fact that most of the articles seem to leave out.

• Apple Airport Extreme and new FIOS router - problem

  Hello, I have an Apple Airport Extreme 802.11n base station, which worked well with a Comcast router.  When you set up with Comcast router, I set the router to comcast to bridge and the Airport Extreme has done all the work as the main router. When I switched to Verizon FIOS today, I get the typical mistake of NAT double (that I did with the Comcast before configuring the router to Comcast to bridge).  However, the tech support guy FIOS said that was not an option, so he set up my Airport Extreme in bridge - router off mode mode.  This really live to the top incoming access using SSH, Timbuktu or the Apple screen sharing, given that I can't assign fixed IP addresses to the computers on my network and can not use the Airport Utility Network Port settings to open "pipes" for a particular computer.  In addition, I'm more comfortable using Airport Extreme, rather than things FIOS. Someone at - it other than enter Comcast suggestions?

  I did a search and didn't see a post on this in the discussion forum.  Thank you

  What is the brand and model of your router Verizon? Verizon provides you with administrator access to it to allow you to make changes?

• Purchase of 3rd Apple Airport Extreme Base Station

  My current 2 Apple Airport Extreme Base Stations (the two 5th generation) are implemented as shown in the screenshot below.

  My fiber service (80 MB/s) is hard directly on an Apple Airport Extreme Base Station plugged into my home office (via an Ethernet cable that connects from the box of fiber on the outside wall of my house to this AE).

  While AE is hard wired to a 2nd AE in a separate building in my back yard (via an underground conduit of PVC).

  Wired connection that's not a separate Ethernet cable.

  Instead, my provider of fiber spliced in an existing telephone cable that already existed.

  Currently hard connected directly to that 2nd AE in the building separated (via Ethernet cable) are the following:

  My Dell Precision Tower 5810

  My Canon imageCLASS MF6160dw (all-in-one)

  Printer color of my Epson Stylus Pro WF-5190

  (Suite after screenshot)

  

  I am replacing a very old 30 "TV Sony with a 60" LED Smart TV & want to run an Ethernet cable from the AE 1st in my home office to the living room where will be the TV.

  My intention is to add a Roku at the same place than television.

  In addition, I want to increase my wifi signal in the room.

  I know that the Express is 1/2 the cost of the extreme, but will most likely go to the extreme. - If the extreme will give me faster speeds for my Roku and TV.  In addition, I like to have the additional ports available if I ever sign anything else.

  My fiber Service is 80 MB/s Up & Down, but I regularly receive about 96 +.

  80 MB/s is no longer offered by my supplier of fiber, but I'm grandfathered in.

  The available speeds are now 45 (?) with the speed of 100 Mbps.

  I think I'm really on 100 Mbps service.

  QUESTIONS :

  The 2nd AE has been "extended" EI from 1.

  Just as "extend" the 3rd AE?

  For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

  Other recommendations will be greatly appreciated.

  The 2nd AE has been "extended" EI from 1.

  Just as "extend" the 3rd AE?

  Yes, either by connecting to the extreme 1... recommended, if possible... .or extreme 2nd... If it is not convenient to connect to the 1st.

  For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

  Locate the extreme new... which has a much better arrangement... wireless antenna where it provide the most benefits to nearby wireless devices.

  Otherwise, you might want to consider renaming your airports, because the current device names far exceed the recommended length name a 26 characters max, including spaces. Keep the name short and simple wireless network as well... and to avoid special characters in the name... as an apostrophe, a sign dollar, asterisk, etc..

• WAG160N and an Apple Airport extreme

  I recently bought an Apple Airport extreme, and in order to use the guest account, I need to disable DHCP and NAT on my WAG160N settings and allow extreme settings. Otherwise the extreme is in bridge mode and therefore doesn't let me create a guest account.

  Could someone tell me please what settings I need to change in the WAG160N so that it acts as a modem only and not a router.

  Thank you

  You can't disable NAT on the WAG unless you go to fashion of the bridges, which means that it becomes a simple modem. You cannot use the wireless on the WAG, nor anything else. In bridged mode, you configure Airport Extreme as main router connecting to PPPoE (or whether you need from your ISP).

  Switch mode bridge on the main configuration page.

• The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  Hi kdwis,

  Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.

  Hope this helps!

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters

• Can I use old time capsule for storage only with a new airport extreme (standard want latest HQ)?

  I have a time Capsule elders (802.11n). I would like to know if I can still use this time Capsule only as a network storage device, if I decide to build my network with a new Airport Extreme (802.11ac). If I can do that, how would I set up the network to continue automatic backups with a router to update?

  To do what you want, the new AirPort Extreme 802.11ac would be installed as the "main" network router The time Capsule would be connected to the AirPort Extreme, using a wired Ethernet cable connection, and the time Capsule should be configured to run in bridge with the service Mode Wireless off.

  Any Mac you want to save in the time Capsule would need to have Time Machine preferences on each Mac adjusted to ensure that the time Capsule has been set as the target for backup.

  If you decide to add the AirPort Extreme, post back for more information at this time, if you need installation instructions step by step.