Please help me with my imac beachballing running El Capitan

Similar Questions

• This question is about programming in C. you please help me with a question that is.

  This question is about programming in c. can you please help me with an issue that is -

  Why do we write - printf ("r = c = %d %d sum = %d\n", sum c, r,);

  What we're trying to accomplish here by writing this.

  I also wanted to know why we write things within double quotes.

  The book programming in C I have, gave no information on this subject.

  The way if statements can be nested, of same whiles and fors can

  also be nested. To understand the nested loops how to work, watch the

  program below:

  / * Demonstration of nested loops * /.

  (main)

  {

  int sum c, r,

  for (r = 1; r<= 3="" ;="" r++="" )="" outer="" loop="">

  {

  for (c = 1; c<= 2="" ;="" c++="" )="" inner="" loop="">

  {

  sum = r + c;

  printf ("r = c = %d %d sum = %d\n", sum c, r,);

  }

  }

  }

  When you run this program, you will get the following result:

  r = 1 c = 1 sum = 2

  r = 1 c = 2 sum = 3

  r = 2 c = 1 sum = 3

  r = 2 c = 2 sum = 4

  r = 3 c = 1 sum = 4

  r = 3 c = 2 sum = 5

  In short, in C, a string enclosed in double quotation marks is replaced by a pointer to character to this string somewhere in memory.  The first parameter of a call to printf() is a pointer to the format string and the following parameters replace the % {(quoi que) the characters that appear in the format string.}  %d represents a whole argument of printing.

  HTH,

  JW

• The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  Hi kdwis,

  Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.

  Hope this helps!

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BlackBerry smartphones please help me with this indicator on my screen... it has reduced the quality of the voice

  

  Please help me with the rectangular symbol on the top next to the speaker symbol. It seems that I turned on an option by mistake, and whenever I've make or receive a call, this symbol appears. This was not the case previously.

  For this reason, my voice call quality has declined considerably. Please help quickly.

  Thank you

  itsmits

  Of course, he was told here in the forums of many times.

  It's the Audio Boost indicator call.

  To change, press your green numbering > Menu key > Enhanced Audio Boost.

• Please help me with the issue of the image

  Hello

  I need to create a report of error log which two same named images overlapped together.

  

  The image above shows how is my page indesign file. I need the report as error log:

  With overlapping of images: photo_sample3.jpg

  Logic:

  I don't know what logic I need to use to get there. But with my knowledge, I thought, I can use the image name and the value of geometric image to achieve. I found a script that gives the number duplication, if any of this page in this page of this forum.

  var overlapArray = new Array();  
  var myPages = app.activeDocument.pages.everyItem().getElements();  
    
  for(i=0; i<myPages.length; i++)  
  {  
      var myPgItems = myPages[i].allPageItems;  
      for(k=0; k<myPgItems.length; k++)  
      {  
       var bounds1 = myPgItems[k].geometricBounds;  
              for(j=0; j<myPgItems.length; j++)  
                   {  
                     var bounds2 = myPgItems[j].geometricBounds;  
                       if(k==j)  
                       {  
                           continue;  
                       }  
                      var temp = touches(bounds1, bounds2);                     
                      if(temp == true)  
                      {  
                          overlapArray.push(myPages[i].name)  
                      }  
               }  
           }  
   }  
  alert("overlap Pages: "+overlapArray);  
    
  function touches(bounds1, bounds2)  
  {  
  if (bounds1[2] < bounds2[0]) return false;  
  if (bounds1[0] > bounds2[2]) return false;  
  if (bounds1[1] > bounds2[3]) return false;  
  if (bounds1[3] < bounds2[1]) return false;  
    return true;  
  }   
  

  Please help me with script or logic.

  Thank you in advance,

  Kitty

  Hi well,.

  all was needed was a line of code

  Array.prototype.intersect = function ( coordinates ) {
      var n = this.length;
      var nY1, nX1, nY2, nX2;
      var y1 = coordinates[0];
      var x1 = coordinates[1];
      var y2 = coordinates[2];
      var x2 = coordinates[3];
  
      while ( n-- ) {
          nY1 = this[n][0];
          nX1 = this[n][1];
          nY2 = this[n][2];
          nX2 = this[n][3];
  
          if (
              (
                  ( y1>=nY1 && y1<=nY2 )
                  &&
                  (x1>=nX1 && x1<=nX2 )
              )
  
              ||
  
              (
                  ( y2>=nY1 && y2<=nY2 )
                  &&
                  (x2>=nX1 && x2<=nX2 )
              )
  
          ){
              return true;
          }
      }
  
      return false;
  }
  function reportOverlaps() {
      var doc,gs, g, n, o = {}, p, pg, pb, lk, lkn, overlaps = [];
  
      if (!app.documents.length) return;
  
      doc = app.activeDocument;
  
      gs = doc.allGraphics;
  
      n = gs.length;
  
      while ( n-- ) {
          g = gs[n];
          p = g.parent;
          pg = p.properties.parentPage;
          if ( pg instanceof Page ) {
              pb = p.visibleBounds;
  
              lk = g.itemLink;
              lkn = lk.name;
  
              if ( !o[pg.name] ) {
                  o[pg.name] = o[pg.name] || {};
              }
  
              if ( !o[pg.name][lkn] ) {
                  o[pg.name][lkn] = o[pg.name][lkn] || [];
                  o[pg.name][lkn][ o[pg.name][lkn].length ] = pb;
              }
              else {
                  var intersect = o[pg.name][lkn].intersect ( pb );
                  intersect && overlaps[ overlaps.length ] = "Pg:"+pg.name+"//"+lkn;
                  o[pg.name][lkn][ o[pg.name][lkn].length ] = pb;
              }
          }
      }
  
      alert( overlaps.length? "Following overlaps where found:\r"+overlaps.join('\r' ) : "No overlaps found" );
  }
  
  reportOverlaps();
  

  Loïc

  www.ozalto.com

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• Please, please help me with import my music (duplicate)!

  Hello!

  I had to spend my OS from windows vista to windows 10, so I did.

  Before I did it, I did a backup of my music in one folder and a backup of each single selection in its own folder as well, an external hard drive.

  Now that I'm on the new OS, I reinstalled iTunes and am trying to get my music back to the way I had it when I am running vista.

  First, I dragged all my folder music music in itunes without any problem, it is easily transferable.

  Then I wanted to recreate playlists, so I moved the music of each playlist to itunes then.

  However, I noticed that this has created a TON of duplicates.

  So I deleted everything iTunes to try again.  This time I thought that I would have the option "Copy files to iTunes media folder when adding to library" checked in preferences > Advanced tab.  I was under the impression that this would be so stop creating duplicates, but instead, iTunes when I try to drag my music in itunes with this option checked, I get an error saying "the attempt to copy to the disk operating system failed. the file name is not valid or too long "."

  I have more than 8,000 songs and only 1000 or has been uploaded successfully to itunes before this error message appeared and everything stopped.

  Please help me understand what is happening here, or how I can fix it.  All my music played perfectly on vista.

  Thank you very MUCH for any help!

  Anyone?

• Please help me with this question...

  Hello world
  
  Sorry to ask the same question that has been published several times in this forum.
  
  I have the following scenario...
  

  Database name: database1
  
  schema names: schema1
                schema2
                schema3
                schema4
                schema5 
                schema6
                schema7
  
  workspace is with: schema1
                     schema2
  
  
  1. can i create 1 application that need to access tables in both schema1 and schema2 ?
  comments: I think we have to choose "parsing schema" when i am creating an application.
            if i choose the parsing schema as "schema1". 
  2.how can i create a "form on a table" or some other wizard based forms which is in schema2?
  3.what priviliges do i need to create "form on a table" or some other wizard based forms which is in schema2?
  
  4.As my workspace is with schema1 and schema2. How can i create "forms" on tables which are in
   schema3? do i need to "create a view of table in schema3"  in schema1?
  
  
  
  All the above question will raise if i have to create forms or reports with "wizards". Is this stmt correct?
  
  I mean if i create a form "manually" all i need to look whether i have insert,update and delete priv on
  that object? is it correct?

  I think that this question has been answered several times.sorry for the repost.
  
  Thank you

  It is not necessary to say "Please help me" as aid happens almost always. Maybe sometimes you need to get back your question after a while. However, back to your question. I can tell you how to solve this problem:

  grant select, insert, update, delete on all the tables in the schema of analysis
  grant select on all the analysis schema views
  grant to run on all procedures and packages to the scheme of analysis
  creation of synonyms in the scheme of analysis for all tables, views, sequences, etc.

  You can do all this programmatically in a loop instead of write for each object separatelly.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Want M4: Please help - problem with Ralink RT5390 802.11b/g/n WiFi Adapter

  OK so I've had this laptop for a while and it has been great until today. I'm unable to connect to wireless internet. After reading around online for a quick solution (which I didn't), I have this to offer... I have a ralink RT5390R 802.11bgn wi - fi adapter. The drivers are up to date and the status of the device is:

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  What can / should I do? Help, please!

  -Chris

  Hello @CBrustas,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are not able to connect to your wireless network, and that an error code is displayed. I'd be happy to help you!

  To clear the error about your wireless adapter, I advise you to follow the steps described in this document on difficulty: "this device cannot start" error Code 10 in the Device Manager in Windows.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Please help me with this vi

  Hello friends I m new learner

  Please help me

  I have this program Please tell me how to send readings and data in table vi and wwhen I press the button log file it should save the file one by one? and

  Please tell me the logic also when I press next, he must go to the next page and back then return to the page and pressing out he must go out and finally next page button should disappear...

  someone help me please

  Thanks in advance

  concerning

  Naomie

  Please use complete words when entering posts on the forum and not 'text speak '.  A plea for words full

  A problem I see is that you have lots of tunnels in the structure of your case where you do not connect the data in all cases.  You end up with the tunnels for "Use default if unwired", feeding the default data in your shift register which later get used.  Probably not what you want.

• Could someone please help me with a problem I'm having with my update s/ie window?

  I was trying to find a way to get help with my concern about internet/window update of. 99% of the time when I'm in train to get updated window or check the mails on yahoo and a few other sites, my page is immediately closed. I tried to delete the cookies and files and restarted and system restore and reset my IE as well. Nothing works, and I know that I need some updates (would be nice to be able to check my email yahoo also).

  This is what happens in detail:

  I type in the Web site window update and as soon as he gets it closes immediately. When I type in the website of yahoo and then click check mail it closes immediately. There were a few other sites, but these are the 2 most important for me. I have no error code and no warning, just boom that it is gone and everytime I try to bring everything back up, it closes. I did everything I could and I am at a loss.

  Could someone please help me if I can get things and finally be happy and not so stressed. This happened for some time now. I tried to contact technical support, but I can't ever get a straight when clicking we answer contact as normal websites don't. So I try here.

  Please help me solve this problem... also I "think" I have IE 8? could be 7, but I think that 8. I can't because it messes up my computer.

  Thanks, I look forward to talk to someone soon then.

  Catt

  You probably have a nasty malware infection.

  In case you are unable to solve this problem with the suggestions of others, I think you should choose interactive free aid to this page:
  http://www.bleepingcomputer.com/forums/forum103.html

• Please help me with this &#60; I have a virus, a bug, malware or something...

  There is something called Firewall Builder windows (activate ultimate protection then asks a credit card on an anonymous line) that keeps popping up and saying I have all sorts of things wrong... but I can't find a way to remove it, it blocks my anti virus and the scanner tools Microsoft apparently can't find it I need help with this... He also does something to my to my system restore, I can't go back today... This bug also always flashes something on torrent link detected everytime I try to download something from Microsoft... it's very frustrating please help.

  sincerely of Tanya Willis

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Firewall-constructor

• Can someone please help me with a free upgrade from Windows XP to Windows 7?

  Student in need.

  I am a student in the second half of the school. Finance did not allow me to buy a laptop with Windows 7, and most of the things necessary for research and written research documents you must have at least window7. Please, can someone help me with a free upgrade for Windows XP? That's all I have for now. Please, I beg you!

  You can get a student to the operating system for much less than the retail. Discover your college store, they generally available.