Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

Similar Questions

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• Get the following error on reboot of the computer: Windows did not start because of a configuration of the disk of the computer problem

  Original title: where can I download iso windows xp recovery CD

  I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
  Windows did not start because of a configuration of the disk of the computer problem.

  Could not read from the selected boot disk. Check the hardware path and startup disk.

  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  So I need an iso file XP Recovery.
  I can simply copy the iso files on USB and start with usb?

  Hello

  1. don't you make changes on the computer before this problem?

  First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• help with this error message (load needed DLLs for kernel)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error message load needed DLLs for kernel in Windows XP
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·         When you get this error message?

  Refer to the following articles:

  Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

  http://support.Microsoft.com/kb/812450

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Windows XP, computer crash, said to contact technical support, "load needed DLLs for kernel."

  What should I do now that my computer does not start? I tried F8, F10 and reboot... message came on the black screen "please contact the technical support and say" load needed DLLs for kernel. " "I do not have the Windows XP OEM or recover the disk.".

  You will probably need ot to obtain from the manufacturer of the computer for the installation diskettes (which would be less expensive to get a new XP license) and the repair of the operating system or do a new install. Keep in mind that this could have been caused by your failure to drive hard and not because of software corruption.

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• I turned on my computer and found this error message, windows does not start because the following file is missing or corrupt, config sys files

  I turned on the computer and this error message was the first thing I saw, and I had to spend the next half-hour reinstall windows xp. I want to know why I had to do and what can I do if this does not happen?

  Hi Lady of shadows,

  ·         What is Windows now reinstalled and perfect work?

  If so, you can see the following article for future reference.

  How do I recover from a corrupted registry that prevents Windows XP startup