Please help to choose the order of drivers when I get the "Display Driver Stopped Responding and has recovered" message

Similar Questions

• Error: The display driver stopped responding and has recovered

  Sometimes (one times a day at least)
  video driver says:

  "Display driver has stopped working and has been restored! »
  Someone suggests the cause or the problem?
  Thank you

  Hello

  I found an interesting about this error - http://support.microsoft.com/kb/2665946 article
  I do not know what computer you are using, but what you can try is to visit the Toshiba download page and check if the latest driver is installed on your machine.

  To be honest, from time to time the same happen on my machine. I use Win7 64 bit. It happens usually if several applications are open and that one of them is active in the flash player window.

  Can you please tell us which model of laptop you have and which version of Windows is installed?

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• in autocad, 2012, if I get any command, the screen goes black and 1 "after return and display this message"display driver stopped responding and has recovered,

  "display driver stopped responding and has recovered, display driver Intel Accelerator for windows 7 (R) is not responding and has successfully recovered".

  My loptop is a HP Pavilion dv7 i7 intel procesor, 6 GB ram, graphics card intel HD3000, 64-bit

  Have you checked for any display driver later by the manufacturer of the graphics or your machine?

  You have a display driver earlier that you can 'Dismantling' to?

  Using the feature to restore the driver for Vista (or Win 7)
  http://www.Lockergnome.com/Windows/2007/09/21/use-the-driver-rollback-feature-of-Vista/

  AutoCad can run in Mode without failure?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried right clicking on the shortcut to the AutoCad program, or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

• Display driver stopped responding and has recovered the problem

  I got a Dell Inspiron M5040 with Windows 7 for Christmas 2011 and I started to use Windows Live Movie Maker, but whenever I get in the middle of editing a video, the screen went black for about a second and says "display driver stopped responding and recovered." The first time this error message has occurred, the laptop computer itself restarted and is went to a blue screen with the text, telling me to go into some sort of 'safe mode' (I couldn't read the text in time). I have all the latest drivers, my laptop is new, only yesterday lit.

  What can I do about it? I really want to use Movie Maker. I'm new to the Forum, so I hope someone help me. Thank you very much. Any help is appreciated.

  Hi James

  What you see is called the action process.in TDR (Timeout, recovery of the display).

  In earlier versions of windows when the display device ran out of resources throughout the system would stop responding which would require a reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  This happens more often when reading graphic intensive games, but can occur with any process that uses a large amount of graphic resources, such as you see when you edit or create videos.

  What you can do to avoid these problems:

  1. only this type of procedure when the laptop is connected to a source ca.

  2. in prior to starting video editing, restart the computer.

  3. close all other running programs to ensure that all graphics resources are available for video editing.

  Windows Live Movie Maker Help Center - what is the system requirements? :
  http://explore.live.com/Windows-Live-Movie-Maker-system-requirements-UI

  Concerning

• Display driver stopped responding and has recovered the display driver NVIDIA Windows Kernel Mode Driver

  Hey guys I have a problem that is really starting to stop a little worth. I recently bought this desktop computer and I had problems with the GPU drivers when I play some games. In the middle of my game, I am reduced to a minimum and maximized every 15 seconds and have the error "display driver stopped responding and recovered, NVIDIA Windows Kernel Mode Driver display driver." I tried SEVERAL solutions from different threads, and I still have this problem.

  Things I've tried:
  -Added a TdrDelay (8) in my regedit
  -Defining my CPU PhysX on my GPU instead of automatic selection
  -Install an older driver over the last.
  Specifications of the PC:
  -8 GB DDR2 RAM
  -Nvidia GeForce 9800 GT Galaxy
  -Power 500w S
  -Card mother ASUSTeK Computer Inc. M3N-HT DELUXE
  -Microsoft Windows 7 Ultimate 64-bit free multiprocessor-7601 Service Pack 1
  -AMD Athlon (TM) 64 X 2 Dual Core Processor 6000 +.

  Hi Vexin,

  Try the following steps to solve the problem.

  Step 1:

  I suggest you uninstall the device of the graphics card from the Device Manager.

  To open the device in Windows 7 Manager - check this link.

  Once uninstall you the graphics drivers in the Device Manager restart the computer.

  Step 2:

  Visit the manufacturer's website and download the latest drivers for the graphics card.

  Link to the manufacturer's Web site.

  http://www.GeForce.com/drivers

  I hope that helps!

• Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

  Hello

  I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

  I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

  Thank you

  Amira.

  2 months old?

  It is under warranty.

  Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  See you soon.

  Mick Murphy - Microsoft partner

• Display driver stopped responding and recovered the error message.

  My computer says that I have the current driver.  I'm running Vista 64-bit, ATI Radeon 3100.  The screen turns off and turns back on.  It only happens when I am connected to the projector to the Church.  Help.

  Hi Beth,

  ·         Have you checked the Web of ATI site for the latest drivers?

  I suggest that you uninstall and reinstall the video card.

  Step 1: To do this, follow these steps.

  a. click Start and type devmgmt.msc in the start search box and press enter.

  b. expand display adapter.

  c. right-click on your video card, select Uninstall.

  d. restart the computer. Windows should now reinstall the video drivers.

  Step 2: Update the computer with the latest graphic drivers. Log in the Web site of the manufacturer to do so.

• display driver stopped responding and freezes the screen

  Hi I'm using a dell laptop inspiron 1545. I have a new hard disc recently and had to install windows 7 in there. After that, I continually get display driver has stopped working and message recovered which is followed by a breakdown and normal operation. But now, after that this problem will appear 3 - 4 times the screen freezes and nothing happens. I have to turn off and restart the notebook

  Hello

  Thanks for your posting in Microsoft Community

  This matter is already discussed in another thread, gently you must search for the answer before posting at least spam and unless that thread or pages, however this issue will happen while the display is does not match the version of the bios Dell that you are currently

  You have a Dell nvidia graphics card... or it is the case for the integrated graphics card Intel
  Have you tried to update the graphics driver on the dell support site
  Tried to update your bios

  This error can occur because of an outdated video driver in many programs running at the same time or same high CPU activity. There is a link to an article on the next post which gives more information on the issue and helps repair, see:

  http://support.Microsoft.com/kb/2665946

  Or call dell support for the installation of the latest driver or bios

• Help with error: "display driver stopped responding, but recovered."

  Hello

  First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

  AMD Phenom II X 6 cpu.

  My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

  Display driver stopped responding, but recovered

  Driver AMD display driver stopped responding and has successfully recovered.

  This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

  I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

  Thank you very much!

  I found a solution that helps!

  Please make a backup of the registry before making any changes in it.

  When editing the registry go to:

  • HKEY_LOCAL_MACHINE
  • then the MATERIAL
  • then DEVICEMAP
  • then the VIDEO
  • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
  • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
  • Double-click MaxObjectNumber, and an edit box appears
  • put 0 in the given value, and then click OK.

  This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

  If anyone knows how to save the changes to the registry, I would be very grateful for your advice.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Please help me choose the right format mask

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  WITH data AS
          (SELECT 0.123 n FROM DUAL
           UNION ALL
           SELECT 12345678 FROM DUAL
           UNION ALL
           SELECT 12345678.1234 FROM DUAL
           UNION ALL
           SELECT 12345678.123 FROM DUAL
           UNION ALL
           SELECT 12.00000008 FROM DUAL)
  SELECT
       TO_CHAR (n)
  FROM
       data;
  

  Thank you, Dmitry.

  Hi, Dmitri,

  Dmitry Dunaev wrote:

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  1. WITH the data AS
  2. (SELECT 0,123 n FROM DUAL)
  3. UNION ALL
  4. 12345678 SELECT FROM DUAL
  5. UNION ALL
  6. SELECT 12345678.1234 FROM DUAL
  7. UNION ALL
  8. SELECT 12345678.123 FROM DUAL
  9. UNION ALL
  10. SELECT THE DOUBLE 12.00000008)
  11. SELECT
  12. To_char (n)
  13. Of
  14. data;

  Thank you, Dmitry.

  I don't think that TO_CHAR can do by itself.  You should maybe call TO_CHAR and then manipulate the output a bit.

  Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'.  So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

  Output:

  STR0 N

  ---------- -----------------------------------------

  0,123.123

  12345678-12345678

  12345678.1 12345678.1234

  12345678.1 12345678.123

  12.0000001 12.00000008

  What do you want for greater than-1 negative numbers?  You may need to make the CASE a little more complicated expression, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  WHEN the str LIKE '. %'

  THEN '-0 "|" SUBSTR (str, 2)

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

• The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP. I have it enabled on DEP. Please help me.

  The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP (Data Execution Prevention). I leave on the DEP list. Please help me.

  Hi Brainiac107,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  Check and make sure that you have followed the method to allow the game through the protection of execution of data (DEP) below.

  "" "" "a) departure ' Run ' sysdm.cpl ' click 'Advance' tab" now click on 'Settings' running ' then click on the "Data Execution Prevention" tab

  (b) now click on the "turn on DEP for all programs and Services except those I select:

  (c) then click add and go to and select C:\Nexon\Combat Arms\engine.exe

  (d) now, click Ok then apply.

  (e) restart the computer.

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

  Method 2

  If the previous step fails, then try to run the game with administrator privileges and check if it works.

  (a) right to the shortcut from the game or if you try to install the game, right click on the game setup.

  (b) click on run as administrator.

  Method 3

  If you're still having problems with the game then post your request in the forums of game seller.

  http://Forum.NEXON.NET/CombatArms/forums/8624/ShowForum.aspx?PageIndex=2&SB=0&d=1&DF=11

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion G6 2323sx: Please help me for the missing driver of my laptop. (acpi\hpq0004\3 & 11583659 & 0)

  Dear Sir / Maam,.

  Please help me find the driver for the unknown device from my laptop.

  Model HP 2323sx G6

  Operating system Windows 8.1 (64-bit)

  Unknown Device acpi\hpq0004\3 & 11583659 & 0

  Thanks in advace.

  

  Hello:

  You need this driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

• HP 15-ac025tx: Please help to find the right driver for Wi - Fi and Bluetooth

  HP 15-ac025tx

  MODEL: M9V00PA #ACJ

  OS: Windows 7 (64-bit)

  Hello

  Would you be able to help with the link to the drivers for my laptop model mentioned above.

  1 WiFi

  2 Bluetooth

  3. the screen

  These are the elements located in the exclamation point (!) in the Windows Device Manager:

  -Graphics cards

  AMD Radeon (TM) R5 M330

  -Other devices

  BCM43142A0

  Network controller

  Acquisition of ICP data and Signal Processing controller

  Unknown device

  Many thanks in advance,

  Anish

  New Delhi

  Hello:

  You need these drivers for the wireless and bluetooth...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_145419_1 & swEnvOid = 4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_154511_1

  Graphics card: first install the Intel driver and restart.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72651.exe

  Then, install the graphics driver amd and restart.

  This package provides the graphics driver AMD/Intel switchable high definition (HD) for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance.

  File name: sp71254.exe

  Acquisition of ICP data and Signal Processing controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

  Unknown device is probably in need of this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe