Please help, unidentified network, Internet access without problem...

Hello world...

I have a Toshiba Satellite C850 performer windows 8 64-bit, and it was working fine, suddenly the wifi doesn't connect now and said internet access, when I press on troubleshoot it says "wifi is not a valid IP configuration", and also tried to connect through a LAN cable, it does not either, but other laptops and mobile phones perfectly connects to the network It happened after I installed Skype. !!! I know it's a coincidence, but thought I should say...

I tried to disable the two network adapters, forget network then connection, tried to remove the 'Hello' in the firewall, but I was not even have Hello... I'm going crazy with her...

I tried to disable the firewall, anti-virus uninstall, I got avast, I tried to disable IPv6.

tried these commands cmd

netsh winsock reset catalog

netsh int ip reset reset.log hit

ipconfig/flushdns

He said

«"«reset the interface...»»» Ok!
"something that I don't remember now" reset OK!
reset failed
Access is denied

«' There is no user specified parameters to be re-armed»»»

Although I chose command prompt (admin)...

also tried

ipconfig/release

ipconfig/renew

It was the result

Although I was connected at this time...

Tried another router wifi at home with my brother, with no other connected devices but this win8 one, didn't work either...

Tried to boot into "Safe Mode with network" no longer works...

I tried to uninstall the driver and install the last, also did not work,

I also disabled the (avast NDSI firewall driver) and the (avast firewall driver), didn't work...

This is the screenshot of the ipconfig/all command

I tried to take the IP address and the subnet mask and default gateway and DNS servers, since a working laptop and enter manually on this laptop from win8 but did not work, but now there is no 'limited access and no yellow triangle', but still no internet connectivity...

Here are a few screenshots:

My network is the first...

and ALL this applies for WiFi AND cable LAN, and also I tried to connect my Samsung galaxy phone and tried 3 G connect via it's also did not work, but it used to work before the problem 

HEEEEEEEELP PLEEEEEEEEAAAAAAAAAASE...

Hello

Please contact Microsoft Community.

We appreciate your efforts and the provision of information in detail about the issue. As you have already tried some troubleshooting and your computer still does not connect to the internet. I suggest you to consult the article below and check if it helps.

How to refresh, reset or restore your PC;

Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

Important: refer to the section "restore your PC to an earlier point in time."

Note: Try to restore your system to an earlier date when everything worked correctly.

Meet us, then we can help you further.

Tags: Windows

Similar Questions

  • Windows Vista - unidentified network Local Access only tried everything please help

    Hello

    I have an Acer Aspire M1610 running Windows Vista Home Premium Service Pack 2 and 2 days ago when I turned it on the internet was not working and it says unidentified network Local access only. I use a wired Ethernet connection. I don't know how it happened as before I had used the computer as usual and the Internet worked very well. I did a lot of research and read a few forum posts about this problem and tried a few solutions but non of them worked. I tried the following:
    (1) disable my firewall and anti-virus who didn't work, I turned their back on immediately.

    2) press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

    Type route delete 0.0.0.0 press ENTER.

    Type ipconfig/flushdns press enter

    Restart your computer.

    (3) the internet protocol version 6 clear, disable and enable the thing

    (4) if same Norton software removal tool I had uninstalled the when I got the computer I read that uninstall it by using uninstall windows is not entirely remove it.

    (5) another thing in the command prompt I don't remember exactly what it was, and I can't find the site Web is because I looked so much of.

    (6) I even reset my computer to factory settings and then uninstalled all unnecessary software and trials that come with and used the software again Norton removal tool.

    Does anyone know how to fix this? Any response will be greatly appreciated.

    Thank you

    Hi Alex,

    Have you tried to assign the IP addresses manually?

    I wish that refer you to this article-

    http://support.Microsoft.com/kb/928233/en-us

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Thank you.

  • unidentified network - local access only

    Hi, so I have this old Sony Vaio for four years, I used a wired internet connection for the past four years, until what we moved house and received a wireless router. our friend connected to me, and everything worked well, until I had to format the system. I tried the troubleshooting, looked through various forums, but nothing helps, like many, I understood what to do. I reset the router and it works fine on the netbook to my mom, but on the vaio, it says unidentified network - local access only. just to add, it uses a system windows vista Home premium.

    Hi Zuzanna Feliszek,

    Method 1: You can follow the steps mentioned in the link below to retrieve the Winsock2 corruption

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista
    http://support.Microsoft.com/kb/811259

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows


    Method 2:
    you can follow the steps described in the article below, which deals with a similar question

    Network connectivity fails when you try to use Windows Vista behind a firewall device
    http://support.Microsoft.com/kb/934430


    Method 3:
    download and install all Windows Update available (Service pack (SP) 1 and 2)
    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  • Unidentified network - no access Internet (Windows 8 HP, with a Windows 7 Start Menu)

    This problem happened to me a few days ago...

    I don't remember what my laptop model is, and I don't know how to find out. :/

    This is the info that gave me with ipconfig/all:

    Microsoft Windows [Version 6.2.9200]

    2012 Microsoft Corporation. All rights reserved.

    C:\Users\Sadie>ipconfig/all

    Windows IP configuration

    Name of the host...: MyNewLaptop

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Local Area Connection wireless LAN adapter * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Wi - Fi Direct virtual card

    Physical address.... : 68-94-23-A1-3C-B1

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wi - Fi wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: RT5390R Ralink 802.11bgn wireless adapter

    Physical address.... : 68-94-23-A1-3C-B7

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address Ipv6 local link...: fe80::693b:8445:4 has 82: 33fe % 13 (favorite)

    Autoconfiguration Ipv4 address. . : 169.254.51.254 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 325620771

    DHCPv6 DUID customer...: 00-01-00-01-18-2D-49-B9-84-34-97-97-DB-74

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet Ethernet adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    Description...: Realtek PCIe FE Family Controller

    Physical address.... : 84-34-97-97-DB-74

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {362B64C3-A604-48E9-AC1B-562C7155A35E}:

    State media: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter #5

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Please help me? I really appreciate any help...

    Your welcome, thanks for the information.

    I found some information on your computer, and I have this link which includes troubleshooting wireless networks. Open the link and try these steps to help fix your problem.

    Let me know if it helps.

  • Unidentified network Local Access only on Vista Home Basic using Ethernet.

    Have 2 laptops not identified network Local Access only on Windows Vista Home Basic.  One is a Toshiba and the other is a Dell.  I can use the Ethernet on the Toshiba to one of the The Fire Dept. I work at. (From lastweek, haven't checked since.)  I can't go to the other Station.  Get Local access to the unidentified network only.  I get also home and when I checked the Dell, get the same message.  I can connect wirelessly.  How can I solve the unidentified network problem?

    Hello

    If your system is running Hello , Netmagic or any other party 3rd network try to uninstall.

    Try also.

    Type Cmd in the search text box.

    Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

    Type route delete 0.0.0.0 press ENTER.

    Type ipconfig/flushdns press enter

    Restart your computer.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • SOLVED: Computer laptop Windows 7 Home 64 bit has lost network connection (worked without problem for more than a year)

    I have laptop computer power and the router without effect recycled

    There is the same problem with the laptop turned off firewall.

    Connection failed even when using the ethernet cable.

    Can not ping router (return message is "General failure"), but can ping 127.0.0.1
    Router computer shows as connected and my other computer (Vista) sees the computer on a network card but cannot ping it.
    Last internet connection was August 28, Windows software was last updated was on 16 August.

    Hi Muzzy,

    The link to the winsock corruption was helpful - the symptoms were bad for my problem, but searching on the support site, I found these two similar problem reports (I did not find earlier because I had not looked for to Ping General Failure):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/my-laptop-cant-access-the-Internet/0abbae1f-E195-46EB-831b-3958d3cb6d30

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ping-General-failure-to-Internet-intermittent-and/964e959b-ec91-43DC-a5ec-f97240050a4f

    I restarted my laptop in SafeMode with networking and the problem fixed itself - I guess there was a software conflict or an internal configuration had got out of sync.

    Thank you for taking the time to remedy to this - I would not have found the answer without you.

    Phil

  • Using the network authentication Windows 7 name of user and password to connect to a network (internet access)

    When I try to CONNECT to my network, I get a window of security Windows network authentication requires a user name and password. I have no idea this here. Apparently until I find it I will not be able to connect wirelessly to the Internet

    I assume you are using Windows 7 and trying to connect to the wireless network? There are many discussions here for precisely this question and answers not very unhelpful.  Have you tried to manually add the wireless network and select Connect automatically?   This seems to have solved my problems.

    1. open network and sharing Center (click on start - Control Panel - Network and sharing Center)

    2. click on manage networks wireless on the left side and opens a new window - manage wireless networks that use (wireless)

    3. click on add

    4. click on add a network profile

    5. Enter the name of the network - security Type and security key (this info should be provided by your internet service provider)

    6. check the box that says "Connect automatically when this network is in range" and click the next button

    7. click on the close button in the next window that opens (or you can take a look at the settings, if you like, and then click close)

  • Internet access without split tunneling VPN PIX

    I have a PIX 515E with code 6.31. I installed a VPN to allow access to the internal network from the Internet using the Cisco VPN client. It does not work properly. We have some sellers who demand that we come from our Internet IP range to allow us access to their database on the Internet. This works very well for our internal users, but I will allow users VPN for this also.

    Is there a way to allow the user from the VPN client to use the Internet for business access to the internet instead of use the split tunneling to access the internet through their own connection? I would like users to vpn to be NAT would have réécrirait Internet and seeming come from our pool of Internet addresses. What I found references by using the split tunneling, but this won't work for me. Am I stuck getting a VPN concentrator to achieve?

    Thank you

    Josh

    [email protected] / * /.

    The PIX cannot route a package back on the same interface, he entered the, which includes a customer entering the interface external and routed VPN package back on the same interface.

    A router or a VPN concentrator would be able to do this, but not a PIX, sorry.

  • Please help to translate ms access sql for oracle

    Hello

    I work by the migration of sql processes for updating legacy 11g access ms stuff we already use for a lot of other business processes.

    I need advice with the code below if someone could help please.

    SELECT (ABC. NAME = ABC. + (ABC. FAMILY NAME) INITS = ABC. INITIALS or IsNull (ABC. INITS) or IsNull (ABC. +(ABC.) INITIALS)) BDAY = ABC. BIRTHDAY or IsNull (ABC. BDAY)) AS [success]

    The results in the column are successes; 0 = no match fields, matches, 2 = 2 fields match, 3 = 3 fields are the field of 1 = 1.

    It works 3 concatenations and function success fills a column with a numeric value that reflects the success.

    in General, it seems to be almost a Where statement but clause to choose and it operates fortunately access.

    There are a lot more code, but ironically it is fairly standard, once the brackets [] around the table with spaces names are deleted and search and replacement of the legacy! between the table and column names.

    Your suggestions are greatly appreciated.

    Cheers, Peter

    so you'd:

    SELECT DECODE (ABC. NAME, ABC. SURNAME, 1, 0)

    + DECODE (NVL (ABC. INITS, ABC. (INITIALS), NVL (ABC. INITIALS, ABC. INITS), 1, 0)

    + DECODE (NVL (ABC. BROWN, ABC. (BIRTHDAY), ABC. BIRTHDAY, 1, 0) as a result

    Of...

    Returns + 1 for all matches (so 0 to do nothing, 1 for 1, 2, 2,...)

    the matches are: the same name (both null is considered to be identical too)

    Inits and identical initials (null or one of them null is considered identical too)

    bday and identical birthday (both null or null bday is considered identical too)

    HTH

  • Can you please help with my installation of Flash problems?

    My Adobe Flash Player (AFP) has disappeared and I can't reinstall it.  I run Win 7 and IE10.  I was fine until 3 days ago.  Support AFP page tells me I do not have the AFP, but it's on my list "uninstall programs".  I have uninstall AFP, reboot, install AFP (using save-run with no error message), restart and check the AFP support page to be told that I don't have to AFP.  I repeated this process several times without success.  I notice that Adobe Reader 11 and my Adobe Elements are located in C:\Program Files (x 86) \Adobe\ but AFP isn't here.  Help, please!  Thank you.  (PS: Shockwave Flash Object is enabled for both 32-bit and 64-bit.)

    Flash Player is a browser plugin, not an executable program and therefore is not installed under Program Files.

    If you have Shockwave Flash enabled, it means that it is installed.  Maybe you have ActiveX filtering on?  See http://forums.adobe.com/thread/867968

  • network to access the problem on a virtual computer

    Hello

    I have a server with esxi 4, and I created a new virtual machine. My problem is that I don't know how to configure the ethernet card in my VM.

    The server has a single adapter ethernet, with a public IP address. The network configuration is default of esxi: a physical card connected to a virtual switch. My problem is that I don't know what IP should I give the machine virtual eth0, and how I can tell that this public IP is connected to my virtual computer. Here is my network configuration:

    If anyone can help me, I realize that I'm very bad when it comes to networking

    Thank you

    It cannot be the same IP address as the host. Try one upwards or downwards to the IP address of the host. So that nothing else on the network has the same IP address. Make sure you have the right subnet mask and default gateway (the IP address of your router)

  • Please help I can not access my laptop

    "BOOTMGR is missing Press Ctrl + Alt + Del to restart" it's the message that's on my screen, whenever I try to on it, this has happened while I was trying to get it back, but it seems that I don't have a data recovery... Help, please

    Snellzin,

    Contact the help desk support HP for recovery media that you are looking for. The laptop HP 650 is considered a professional laptop so you must contact the Department of commercial and business get what you need.

    If you reside in the United States or the Canada phone number is 1-800-334-5144. If you reside in another country, click on this link , then your country and then click on 'support after purchase. You are looking for listed section HP and Compaq commercial business and the number is provided.

    I hope this helps, let us know if you have any other questions.

  • Please help with XP Pro SP2 download problem!

    I just had to re - install Windows XP Professional w / SP1a. I can't manually find SP2 to Windows Update for XP is not up-to-date. The only version I find is for professionals and Windows Update tells me to check the link for one version service pack. However, I searched for hours and cannot find one. Is anyone know where download of Microsoft for SP2 are so I can move me to SP3 or can someone tell me how to force automatic updates to update manually?

    The version for the pros can be used on single computers as well.

    Download it and save it in case you need more: http://www.microsoft.com/download/en/details.aspx?id=28

    For SP3: http://www.microsoft.com/download/en/details.aspx?id=24

    Operating systems supported: Windows XP Home Edition, Windows XP Professional edition, Windows XP Service Pack 1, Windows XP Service Pack

    If you already upgraded to SP1, you can jump directly to SP3.

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

  • Please help the gurus of the OFA - problem solved.

    I have a search page to buy order.when I click on go it displays all the in. the last column of the table results page's column (Details) of the image. When I click on this column of details, it should display the header information and po line.

    but I get the error message like "Houston-25043: InvalidParamException foreign key index 2 0 (key-value table) passed to the view object XxiiplPoDetailsExpVO1 findByKey" when I click on image for details.


    I created two vo
    XxiiplPoDetailsExpVO
    XxiiplPoLinessExpVO
    and the link display - XxiiplPoHeaderToLinesVL

    Details of init is written in AM.this method is invoked to processrequest plug by AM


    public void initDetails (String orderNumber)
    {
    OAViewObjectImpl vo = getXxiiplPoDetailsExpVO1();

    If (vo is nothing)
    {
    Tokens [] MessageToken = {new MessageToken ("Parameter", "XxiiplPoDetailsExpVO1")};
    throw new OAException ("AK", "FWK_TBX_OBJECT_NOT_FOUND", chips);
    }

    Convert the parameter of the string to a number.
    Number orderNum = null;

    Try
    {
    orderNum = new Number (orderNumber);
    }
    catch (Exception e) {}

    First of all, to build an oracle.jbo.Key object as required in the constructor of findByKey
    Javadoc. Then call findByKey indicating that we are looking for a single
    line. BC4J tries to find the entity this row in its cache and failing objects
    who will interview the database using the given key.

    Number of keys [] = {orderNum};
    Line lines [] = vo.findByKey (new Key (keys), 1);

    You must set the current line, or the details page will not display any
    data. When you explicitly query data, you don't have to do this
    because OA infrastructure automatically calls vo.first () in the
    results set, thus creating a current line.


    If ((lignes! = null) & & (rows.length > 0))
    {
    vo.setCurrentRow(rows[0]);
    }

    } / / end initDetails()

    Published by: [email protected] on April 21, 2009 12:47 AM

    Published by: [email protected] on April 21, 2009 12:49 AM

    Published by: [email protected] on April 21, 2009 01:33

    Published by: [email protected] on April 21, 2009 01:48

    Published by: [email protected] on April 21, 2009 01:52

    Published by: [email protected] on April 21, 2009 02:02

    Check the View object, how the attributes are defined as a key attribute?

    Causes of this error is.
    For example, assume that the View object cannot wait no more than one key to both parties, but the key passed in findByKey is a key to three parts. Then, this exception will be thrown.

    I suppose that you have set the key attribute earlier...

    Prasanna-

    Published by: HelloPrasanna on April 21, 2009 10:40

  • Can someone help me with the problem of Vista Home Wireless (unidentified network)

    I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.

    This problem occurs only with this computer Vista Home.  (All other wireless devices have any problems (Win7 netbook, iPad, PS3, etc).)
    ipconfig/all shows me a valid ip address, subnet mask and gateway also seems to have a Mac address of zero.
    Norton Internet Security was installed, but I have removed and still have the same problem.

    Hello

    Position of your router would be suspicious here. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

Maybe you are looking for

  • Apple Watch edition series 2

    the Apple Watch edition series 2 comes only with the Sports Group of cloud or you can change the tape?

  • Satellite U500 - problem installing Windows 7 64 bit

    Hello I just bought a U500 laptop and am trying to install the 64 bit version of windows 7.It is obtained in the section "Installation program starts Services" and comes with a Setup error saying that the laptop needs to be restarted.When it is resta

  • Answer the phone

    When my phone rings, sometimes it gives me the ability to ignore the call and other times not. Anyone know why this is? Thank you very much! -Lisa

  • imitate running a script to run Labview tera - serial communication

    Hi I have an anemometer which I am trying to communicate with via the serial interface. I am connected via a USB converter to 485. The manufacturer of the anemometer provided two scripts of term tera to communicate with the device. When I run scripts

  • VISTA ANTIVIRUS 2008 appears each time computer is turned on

    I picked up a virus that makes my computer have continuous pop ups. One is a spyware alert that says "security alert worm.win32 net booster detected on your machine, etc. Another is the Vista Antivirus 2008, which appears each time the computer is co