Please help wifi does not not ACER aspire 4710g (wireless network card problem)

Similar Questions

• Aspire 4730Z wireless network card problem

  My internet connection suddenly stopped wireless adapter. He pointed out that my wireless router cannot connect to the internet. However, I know this isn't the case since all my other devices connect via the same router. The same thing happens when I plug into the ethernet cable.

  Sometimes, he says that the IP configuration is wrong on the router. I wonder if something happened to the Aspire that it prevents to read the IP configuration, and the error message is an error of interpretation of this problem.

  I would discuss with support on this point, but my series/snid number rubbed on the label, and I don't know what it is.

  I had already tried these suggestions. Here's what worked - I downloaded and installed version 8.1 of Windows driver for the card. So far, Microsoft update he crushed once more, but now that I have the installation of the adapter installed on my desktop, it's easy to put the old one back. Apparently 10 Windows is not stable drivers for all Broadco / Atheros adapters again. It's the wrong Microsoft adapter driver in Windows update that caused the problem. To fix it, visit the website of your computer manufacturer and download and install version 8.1 of Windows.

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• My computer does not connect to the wireless network

  My computer does not connect to a wireless network. It's almost like there is no WiFi. I go into the settings and nothing is. I know that the networks are there because the other computers connect to it. He says always "no connection available. When I try to pull of boredom he tells me to plug an Ethernet cable, which is the thing that I try to avoid. I want to connect to WiFi.

  Based on this information, your laptop isn't wifi, it is turned off, or it is broken.  A wifi used to work?  If so, what happened to your system, just as the problem started?

  Type "Device Manager" in the search box and press ENTER.

  • Look in the Device Manager to the network adapter section.
  • What devices are listed?
  • Are there warning icons?
  • It appears to be a wireless adapter, what's his name? Double-click it and to report to what is shown for "State of the device.

  You can also provide additional diagnostic information:

  • Type 'Information system' in the search box and press ENTER.
  • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
  • Paste (CTRL + V) the data in your response here
  • Return to system information window and click on the + next to "Components", then click on the + next to "Network", then click on 'map '.
  • Select all (CTRL + A) and then copy (CTRL + C)
  • Paste (CTRL + V) the data in your answer below, other data Information System

• Map Wi - Fi on Satellite L40 does not connect to the wireless network

  Hello

  I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

  Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

  Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

  Thank you

  Albert

  Hello

  Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

  Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
  You should also try to reset the settings of the Wlan router.
  Sometimes it helps.

  I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• Toshiba satellite 2450 s203 does not recognize the atheros wireless network adapter

  Hello!

  I have a toshiba satellite 2450 s203 and a network card wireless atheros integrated - somewhere in the laptop - there.

  However, I am running win xp pro and the Device Manager IS NOT to FIND THE MAP!

  He finds the ethernet card and a 1394 network adapter!

  But not the wireless network card!

  Any ideas? I downloaded the drivers from the card wireless site but without success!

  What should I do?

  Thank you!

  Hello
  The WiFi card is an option for this model for example. It is not included in all machines. You must purchase the correct module for W - lan to work.

  If the card is installed in the machine, you should see a yellow esclamation mark (!) or "unknown device" If you uninstalled hw.
  concerning

  Gandalfwhite

• Not detected in T61 wireless network card

  Hello

  I have a T61 (7663-CTO WYG-7663)

  There's a MM2 Intel wireless 4965AGN adapter installed in it.

  Windows 7 is installed, but the Device Manager does not show me any wireless, only the wired network adapter network adapter.

  I tried to change the map wireless with a wireless G pci-e card but still no device.

  Any ideas on what could be the problem?

  Have you checked the BIOS on the T61?

  If it came with a stock of operation of Windows XP (that is to say, it's OLD), it may require a BIOS upgrade.

  Inside the BIOS, I think it's in the Config-->--> internal wireless network.

  That's assuming that it has been installed correctly.

  Guide your T61 for details, I guess.

• Password entry screen does not - Acer Aspire V5 - Windows 8

  I started my computer laptop and hit the password entry screen, but I can not connect.
  I'm on an Acer Aspire V5 - 571 running Windows 8
  The cursor is not in the password field.
  I place my cursor, but can't click on anything anyone, nor in the password field.
  The keyboard works because I can use the Fn key to enable / disable the touchpad.
  CTRL Alt Del does nothing, or if I press it twice.
  Cannot click on the power icon, access or "back" button or the enter key.
  Enter key does nothing.

  I have no discs as came installed.

  Have you any suggestions?

  All fixed. At out the battery to restart it without, closed, battery, reboot. Sorted.

• Recovery USB - stick (DVD player does not) Acer Aspire 7750 G

  Hello world

  My DVD player does not work for quit some time. This is no big problem for me, because one barely use it.

  Unfortunately, it is not possible to burn recovery DVD. In my view, it has an option to do a recovery USB drive. It would be a great solution! Unfortunately I do not have the possibility to do so. Is this only possible for computers without an optical drive? Is it possible to download the program with the option to use a USB - stick as in the YouTube video?

  YouTube instructionvideo

  Thanks in advance,

  Richard

  You can try to work around the problem, since I'm not sure that Acer was already an eRecovery on windows version 7 which allows to create USB recovery media.

  This free software allows you to create a virtual DVD/rw drive and use it to create an iso file, then you can ise this iso file to create a USB stick recovery using rufus:
  of http://www.techsupportalert.com/content/TotalMounter-Free-Virtual-CDDVD-Burner-that-facile-use.htm

  http://Rufus.AKEO.IE/

• Please help computer does not start!

  Hello, I need desperate help! When I try to start my computer, it starts work and then comes to the screen below. I tried to start it in safe mode and others, but this screen keeps coming back. Please help, how can I get rid of him?  The screen is bright blue with white writing and said.  A problem has been detected a windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME so he says a lot of stuff on the verification of the material and at the bottom it said technical information: * STOP: 0x000000ED (0x89D35900, 0x00000000, 0xC000009C, 0x00000000) Please help me! I can't get my computer to start so I have a lot of data out there I'm desperate to get. Thanks, kate

  Hi KateStapleton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• WiFi does not connect to the home network

  IM currently problems with my wifi on my new z3 compact network.

  My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

  I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

  Any help would be appreciated & ty in advance.

  Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
  Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.

• Mode turns off plane but wifi does not, the rest orange wireless button

  I am runnng Windows 8 on a HP Pavilion g4. I've been a play a game with turned off wifi, wired lan wire and battery, mode high performance. The game crashed, I turned off the laptop with power button. After the reboot it and trying to use wifi, I realized that by pressing the wireless button could show "airplane mode" on the screen but it would turn blue, or the wifi turn.

  After that, I tried a system restore, by repairing the existing drivers, check the BIOS and a hard reset by taking the battery, press the button for 30 seconds and then go back to the top. None of these methods have worked so far.

  Any help will be appreciated.

  Hey, thanks a lot for your help. I found the solution.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/wifi-stays-off-after-turning-off-airplane-mode/527f9644-CED1-480C-AD01-87b8597f0cac

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• computer does not list the available wireless networks

  My computer is used to list all available wireless networks I could choose, but now not a list of people or don't allow me to search for available networks. I'm in a place where I know there is a wireless network available, however, my computer will not display it or no matter what other networks unless I plug in an ethernet cable to my computer. Then, it connects, but still does not display the wireless options. Help, please!

  Looking for a switch on the case of the computer that turns on and off wireless networking.  Check the manual of the computer user to see if there is a combination of keys, such as Fn + F5, which turns on and off wireless networking. Boulder computer Maven
  Most Microsoft Valuable Professional