Please, please help. No sound from my sound card on board after installing windows 7

I just installed windows 7 ultimate 64 bit on my computer that previously had windows xp professional sp3 top.  My motherboard, what I don't know, is an a32gv11c from ASUS with a team of a soundcard SoundMax.  I have absolutely no sound and can't seem to find the drivers for it anywhere.  Y at - there anyone out there that can help me to find the driver I need to get a sound?  Help, please.  Thank you.

I know it's my advice, which means that the hardware manufacturer, who has done this.  The installation for the integrated sound card cd says that the current operating system is not supported, which to me makes sense because this material was released before windows 7.

All documentation is in stock and not accessible.  I looked inside to the motherboard and can't seem to find any useful information pertaining to the brand of it...  I never spent by with any programs driver utility because my model did not appear.

Issues that everyone seems to have is with no sound from sound card after installing windows 7, not just isolated to my sound card.  I have a hard time believing I am eternally screwed with no sound from my computer because of my hardware not supported under windows 7.  There must be a solution out there.  I realize that I should have found that now but can not which is what brought me to this forum.  Someone knows and can help me.

You are not 'for always screwed"- you can always buy and install a sound card which the manufacturer supports their product under Windows 7 - operating system, you choose to run.  The trick is to have a piece taken in charge (by the manufacturer) hardware or software - * under the operating system you choose to run *.

Yep - you've had this old Ford Mustang you bought this Nitro kit for... But now that you have this new Ford Mustang - Nitro kit may not work.

Your only real solution: get a piece of hardware - audio device - supported under Windows 7 by its manufacturer.  Else do you play with fire, may or may not work and even if it does not, could be broken by the next patch or update.  If you have a PCI or PCIe available slot, find a cheap good sound card (trust me - the one you had would have qualified as cheap) and throw it in.  15 USD and up to I guess.

Tags: Windows

Similar Questions

  • Sound does not work after installing Windows 8

    I just upgraded to windows 7 to windows 8 and my sound no longer works.

    I tried of codecs and audio vinyl that has worked for me in windows xp, windows vista, and windows 8

    Anyone know how I can fix this problem

    so frustrating even thought to do a downgrade to windows 7, but falling in love with windows 8 already, the interface is just crisp

    Upgrade the laptop but you put t write anything on your laptop model.
    Is what model?

    Is - this earn 8 taken care of?
    Have you used the Toshiba Windows 8 Upgrade Assistant?

  • No sound after installing windows on my hp 620 help 8

    No sound after installing windows on my hp 620 help 8

    I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.

    http://goo.GL/0IMBd

  • Satellite Pro U200 - no sound after installing Windows 7

    Hello

    I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

    G.Magnason

    Hey Buddy,

    Have you already checked the site Web of Toshiba itself?
    http://EU.computers.Toshiba-Europe.com

    I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

  • Satellite A200 - 20 H - no sound after installing Windows 7

    Hey guys.

    I just bought this computer from a buddy and I decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play sounds. There is not its what so ever on the laptop, all cursors are at max, I tried to push any difference of Pentecost FN + ESC. I tried to reinstall and update sound card driver, lucky either.
    I found a "soloution" who said that I should install value added package, and then run an application, which should reactivate the PC, no luck there either...

    So I start running out of ideas?

    So I am hopeing you smart guys here has a soloution.
    If you need any information from the computer, just ask for them and I will answer you whit them as soon as possible.

    Many thanks in advance

    Kim Jensen

    Hi Chillos,

    If you read this article, you can download a tool to turn the sound back on:
    http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

    If it doesn t work it would be interesting to know if you can hear the sound from the external speakers or headphones for example.
    Check this box!

  • No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

    No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

    Thank you. This site help me solve my problem.

    http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

  • Sound card shows uninstalled after Windows Update

    When I update to Windows Vista and the system reboots my sound card shows as not installed.  But when I restart again the sound card back and works normally

    EGeb salvation,

    What updates refer you when talk you of big updates?

    IM sends you a link which also has Fixit : http://support.microsoft.com/kb/948481/

    He should probably help you solve the problem.
     
     
    Thank you, and in what concerns:
    Aziz Nadeem - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
    what you think.

  • No sound after installing Windows Update KB2962407 on Windows 8

    After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

    Hello

    Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

    Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

  • Color print from my hp printer deskjet 5550 after installing a new iMac computer

    I try to print in color from my printer hp deskjet 5550 after installing a new iMac computer.  Do I need a printer driver for Mac, and where can I find the printer driver?  Operating system is OS X Lion mountain.

    Any help would be appreciated.

    Hello

    The HP Deskjet 5550 is not compatible with Mountain Lion and, therefore, the question appears:

    http://support.HP.com/us-en/document/c01856359

    Try the 3rd party HPIJS print drivers that seems to support your printer. don't forget to install one of the 3 downloads required below:

    http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

    Now add the printer in Print & Scan by clicking on the menu drop-down use, and then click Select printer software.

    Select the driver HP Deskjet 5550 HPIJS in the list and add the printer.

    Shlomi

  • Sound card is not after the downgrade from Vista to Xp on Equium L350

    Hi I have a Finalis L350 laptop computer and I've recently downgraded from Vista to XP.

    All other drivers work very well outside of my sound card.

    Does anyone know where to find the drivers I need for my laptop?

    I know what we call drivers

    VIA AC 97 Audio Controller (WDM and SIS 7018 Audio Driver)

    Only problem is that I don't know what those who work with my Toshiba L350 - 10L

    There are different versions of these drivers. No one knows everything everyone who it is?

    Thanks in advance :)

    Hello

    If you download the latest driver from realtek site (which belongs to this sound card since it s a realtek card) you can't do anything wrong. Just check www.realtek.com and download the latest being.

    Welcome them

  • Don't Please HELP: 'no bootable image found, notebook will be stop"after execution of SECURE DELETION

    Hello world

    I have a folio elitebook - 9470 m HP and today I went into the BIOS (F10), and then I went to 'Security' and and here, I performed a 'secure erase'-> 'Notebook Hard Drive' because I wanted to clean the SSD to install Windows 7 instead of pre-installed Windows 8. After a reboot, I get the error message: "can't find any bootable image, notebook will be stop.

    I tried to select the USB drive as the start number one option because I have a Windows 7 bootable Image on my USB and I even tried with Windows 8 on a bootable USB key. I can't the computer to boot from the USB - stick to install Windows. It makes me really mad because I never had problems like this, and I've installed Windows several times on several different machines...

    So if anyone could help me it would be much appreciated!

    OK, here's the solution I got from HP support:

    Go to the BIOS Setup F10, select System Setup, disable "Secure Boot", then select "Legacy", as "Startup Option. Save and restart, now you are able to boot from a bootable Usb key.

  • Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

    I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

    (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

    -Checking that it is not a problem with the monitor by testing with other computers

    -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

    -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

    Unfortunately, it is not the only problem with the graphics card.

    (2) "sleep" my mode is gone (it is related to graphics and BIOS).

    -J' tried the go in power to add setting but it was not yet listed.

    -I went to the command prompt and looked powercfg.exe that's what I discovered:

    C:\Windows\System32>Powercfg - a

    The following sleep States are available on this system:

    Hibernate

    Quick start

    The following sleep States are not available on this system:

    Standby (S1)

    The system firmware does not support this standby state.

    An internal system component has disabled this standby state.

    Graphics

    Standby (S2)

    The system firmware does not support this standby state.

    An internal system component has disabled this standby state.

    Graphics

    Standby (S3) mode

    An internal system component has disabled this standby state.

    Graphics

    Eve (S0 low idle power)

    The system firmware does not support this standby state.

    Hybrid sleep

    Standby (S3) mode is not available.

    Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.

    I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

    NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.

  • Satellite Pro 4600 Sound missing after installing Windows 98SE

    I have installed Windows 98SE on my 4600 whose specifications are:
    Model PS460A-04163
    P850 14TX 128M 20 ML DVD

    I have no sound at all and all the sound options are grayed out. I have downloaded a driver from Toshiba (Yamaha AC - XG?), but it wasn't correct. Can someone point me in the right direction for the correct audio driver. I'm also not sure what "series" falls under this model. Thanks for your help. 7.

    Hello

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=84983

    you will find the link to the page of the Toshiba driver where you can download a driver for this device.

    Good luck

  • Satellite U300 - no sound after installing Windows XP Home edition

    First of all sorry for my bad English; P
    I installed Windows XP Pro on my computer and all the drivers with installation instructions, but I have no sound, there is no audio device. I downloaded the drivers from the Toshiba site and the Realtek site. Both do not work.

    Thank you.

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 please

    There is some discussion on the similar problem. Maybe it will help you with your Satellite U300.

    Bye and good luck!

  • No sound after installing windows 10 MBP 2012

    Hello world

    Here's what I did.

    I have MBP 2012 with El Capitan on it.

    I installed windows on this 10. Here are the steps I followed.

    1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
    2. ISO file 10 Windows installed
    3. Make a key USB bootable but Bootcamp with drivers
    4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
    5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
    6. Installed Windows and driver loaded by installing bootcamp
    7. Everything works fine but the sound

    Tried, but failed

    1. Clean install of windows if partition bootcamp (error - no found boot device)
    2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
    3. Tried the update of drivers for the sound. However, did not

    Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

    Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

Maybe you are looking for