Please refers to the path of the new firmware

This message keeps poping up ("Please designate the path of the new firmware") when I try to update the firmware on my router WRT110 wireless, even if I used the button BROWSE to select the new .bin firmware file.

Someone has an idea to solve this problem?

MB

Have you tried another browser to update the firmware? How about you try it on another computer? If the two do not work, try to power cycle the router (unplug the power for two seconds) then once the power led is solid, try the update again. If the update will still not proceed, reset the router by pressing the reset button on it by using a PIN or a paper clip for 30 seconds. It shut down again for another couple of seconds. Once the power led is solid, try the update again.

Tags: Linksys Routers

Similar Questions

  • Installation of the new firmware?

    How do we install the new firmware for NetGear WNR2200 of genius

    Concerning

    stab

    Here is a link that will show you how to do the update.

    http://KB.NETGEAR.com/app/answers/detail/A_ID/23856

    I hope this will help.

  • The new Firmware...

    Well... I downloaded the new firmware three times and it still doesn't work. What is happening is: I click on the icon (I put it on my desk), he asked me "do you want to run this file? I click on "Run" and the box that opens goes and nothing happens after that. He worked on the first download with my mp3 player. I have a Sansa clip and I had no problems with it until this week. What happened was: I turned it on and it works normally, it seemed, I chose my song, I wanted to listen to and carried on with what I was doing and then it off suddenly. I know that the battery was not dead because I had loaded this day here so I walk back and the Database "Refresh" came so I just went back for the song I was listening to - AND THE IT TURNS OFF AGAIN. So I try to turn it on, it going off, turn it on, it turns off. Finally, it no longer lights. Can I go online to do some troubleshooting to see what the problem was and I've saw that Firmware was supposed to help-so I did a security scan to make sure it was safe for my computer and started to download. As I said, the first time, I downloaded the software that it worked very well. But he said that I had to clear 6 MB of free space on my camera - I did everything what I deleted still shows up on my device so that I could not download the firmware, then I just gave up with it because I've had enough with it does not properly. Sansa never gave no problems so far. Is this the end for my mp3 player? I need to know if I can invest in something else.    Thank you.

    The original video had problems with bad Soldered joints on the battery terminal wires. Sorry to say, this is what it looks like happened to yours. If you are adventurous and handy with a soldering tip fine iron (or know someone who is) you can probably fix it.

    You can Google "dismantling the Sansa Clip" and find all kinds of Youtube videos and other pictograms on the way to get it out without damaging it and put it back together. Otherwise, I fear that it is ruined; transfer the files out of it (as long as it always connects to the computer) and get a new player, maybe a Clip + or Zip if you like the small size and as a bonus, these new players have a SC slot to expand memory.

  • How the new firmware of tftp to wag160n?

    Hello

    My WAG160N has same problem as described in this post from xellmon

    http://forums.linksysbycisco.com/linksys/board/message?board.id=DSL&thread.id=9859 .

    The cancellation of my warranty but new. (void warranty in a storm). Desperately trying to resurrect WAG160n.

    Details of the device

    Annex WAG160N has

    Firmware 1.00.10

    Is it possible to new firmware tftp in the unit?

    If so, how the new firmware tftp?

    what firmware file I need to download?

    Thank you

    Download the firmware for Annex WAG160N has... Try this link and check if it works... If this isn't the case, then, you need to replace the router.

  • Problems with the new firmware 0.1.E.1.4

    Hello

    After the last update, my phone (Samsung Galaxy S3) has problems with his phone for headset support.

    I can only use the headset as headphones to phone for calls. Do not go with general audio profile.

    Sometimes I can connect audio but it disconnects quickly.

    It is a very serious problem that needs to be fixed, but I doubt that Sony will be releasing a fix quickly.

    So, how do I go back to the previous firmware? (0.1.D.0.6)

    With this firmware, I had no problem. The new firmware has a significant improvement as long as Visual but the helmet doesn't help...

    I need help. Thank you.

    OK, I just do a downgrade.

    I did a factory Reset on the helmet, downloaded "Update Services" and the program tells me that there is an update available, after the update has been completed I'm back on 0.1.D.0.6!

  • Need help please, bios sees the new hard drive but still cant boot from the cd-rom

    HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?

    OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!

    Message edited by jaygen on 18/03/2008 20:22

  • Problems with the new firmware

    New firmware called my books podcasts and mixed together books and podcasts.  Podcast alley section. Also fails to player.  Firmware has screwed my player. Need help please, I have a sanDisk Sanasa fuse + MP3 player and latest firm ware (today).  Thanks in advance.

    The first time that you access the books, it's confusing, but take a look on all small three points at the bottom of the screen after you type the central point.  This reveals that there are three screens partitions via slide to right or left on the touch screen.

    To navigate between the choices, some books with a single tap Center, then sweep right or left to go between Audible / books / Podcasts.

    Do you like the new LOCK feature?

    I just made the connection, your name reminds me of Benjamin Vandervoort, played by John Wayne, in The Longest Day.  He served with distinction in Holy Mother Church.

    Bob

  • Can not get the new firmware to "take".

    I am trying to install rockbox on my brand new Clip + - the problem of "Refreshing your media" bit me once I copied 15 GB of my old MP3 player on a new uSDHC card.

    However, no matter what I do, I can't get the player to update its firmware.

    I used rockbox Setup both a manual installation. The fw file is in the root directory of the element, which is in MSC mode, but as soon as I log out, instead of the promised update firware followed by a stop, I simply get "Refreshing your media" and then the player stays on indefinitely.

    Someone at - it ideas? Am I missing something? The player would be defective?

    I think randomly would be that you are trying to Flash the incorrect firmware for your device. Each device will only accept firmware designed for it, in order to avoid destroying the player by the incompatible firmware flashing.

    What is the version number on your player and the name + the version of the firmware file you are trying to flash?

  • EA6500: What changes or improvements of the new Firmware offer?

    I just connected to two of my three routers EA6500 and noticed that they have new firmware: 1.1.29.162351. This new version gives anything of note... or... did some minor changes?

    See the release notes for the update here:

    http://support.Linksys.com/en-us/support/routers/EA6500

  • I have updated to the new firmware, cannot connect to WVC54GC

    Hello

    I update my WVC54GC (V1.1) with the latest firmware from the site (ver 1.26), when the update is complete, blue Led restart, I stoked market once again, but I can't connect to the camera, I have reset, same problem, the led flashes blue awhile then drove on continious, I try to connect with the software (search for camera) and with the browser to the default IP address : 192.168.1.115, nothing...

    Maybe something wrong during the download of the firmware.

    How can I go back to the old firmware? is that their another method for hard reset it (other then on the reset button on the side)

    Thank you to for your advice.

    I solve this problem (after reset the cam for 30 seconds), all settings became as default, including the IP address are set to: 192.168.1.115

    I connect to my PC directly via the cable to the cam, so I changed the configuration of the network card in my PC to:

    IP: 192.168.1.5

    Mask: 255.255.255.0

    Gateway: 192.168.1.115 (this is the IP of the Cam)

    By this solution, I was connected directly to the cam, and I've reconfigured the settings; WiFi, new Ip,... then when I restarded the Cam; all future returned and the cam worked as before (I have not find otherwise with the latest firmware date V1.26 Feb 2008, I had before V1.21 date 2006).

    The funniest thing I bought the cable connection (reverse connection) Ethernet, and when I finished the configuration of the cam, I tried the standard cable (straight): this work is too, so you can use the standard Cam ethernet cable.

  • color laserjet mfp m277dw pro: the new Firmware update

    My M277dw printer is automatically downloaded and installed a firmware update last night.

    The datecode on the printer now shows 20160606.

    The update took me by surprise because I was in the middle of a print session.

    Is it a real update?  If yes where can I find the notes that this version is not on the driver download page.

    @Robert069,

    All the firmware update are directly from the HP Server. They are automatic HP where to connect to the network.

    I don't have details of which fixed the update but not yet posted to the customer of the USB. The update last two were to improve the network connection and built-in web server looks like.

    You don't have to worry about melware on the printer, as melware is a computer-based software. Can not be installed on printers.  Remember to update the printer firmware are link updateing the BIOS on a computer.

    I hope this helps.

  • HP M251n: Could not find the new firmware for M251n printer

    Can someone give me the link for the latest firmware for M251n? I'm unable to connect to the internet, so to update my Mac.

    Also can´t I see in the HP utility and how you can update the firmware (download of files?).

    Any help would be great

    Hello

    You can download it below:

    http://FTP.HP.com/pub/softlib/software13/COL44535/LJ-108135-8/M251_color_Series_FW_Update-20150212.dmg

    Be aware that the latest firmware has been released prior release of El Capitan and therefore not formally scheduled for the operating system, although likely, it should work.

    If you experience problems when trying to update, try to update from a different computer with an operating system, which means up to Mac OS X Mavericks (10.9) or Windows 10:

    http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-200-color-printer-M251-series/5097632/model/5097633

    Kind regards

    Shlomi

  • Having problems with the new firmware, how do I go back?

    I use my rocket to play 'learn the french' CD with very short (2 minutes) titles.  I am constantly jump back securities to repeat what they said.  Unfortunately, the "back to the previous track" button doesn't seem to work right now audio books, and I would try to go back to the old firmware to see if it's the "rocket" or something in how I ripped and my tag CD.  (the track numbers are there, so I think it's the firmware).

    How to get back?

    Thank you!

    Manually install 1.02.26

  • Recognition of devices with the new firmware on EA3500

    Under devices, I find that my laptop Apple (WIFI connection) and our Dell Desktop (LAN) connection are considered to be the same device.  The operating system shows the EA3500 of this device is the system connections apple IOS and address numbers displayed in this device.  It is therefore impossible to set parental control separately on each computer.  What could I do to get the EA3500 to recognize these separate devices?  I tried to force Apple WIFI network address to another address.  All that happened was the address of device updated on the list of EA3500 devices, but LAN and WIFI addresses remain together in the same device name and MAC OS on the list of devices.

    I have the latest firmware downloaded on my EA3500.  It wasn't a question previously when I ran the old firmware.

    Here is one that I see in the list display the LAN address for the address of Dell and WIFI for Apple on the same devices screen.  When I turn off a device, the respective entry goes.  Only when both computers are turned off reflects the unique device entry on the EA3500 offline.

    Details of the device:

    Name: Macbook Pro laptop

    Manufacturer: Apple

    Model: MacBook

    OPERATING SYSTEM: OS X

    IP (LAN)-1: 10.0.121.119

    MAC address: XX (does not list address voluntarily)

    -2 (wireless) IP address: 10.0.121.109

    MAC address: XX (does not list address voluntarily)

    I couldn't get the a screenshot as assignment would fail.

    This is a bug that comes and goes. Personally, I didn't for a while. But it's still there (even with the latest firmware)... If you catch this bug, it is usually difficult to shake because it can resurface. It affects too EA4500.

    There is no real rhyme or reason why it appears.

    http://community.Linksys.com/T5/wireless-routers/EA6500-multiple-devices-under-one-device/TD-p/57231...

  • EA6500 (v1) constantly reboots with the new Firmware (1.1.29)

    The latest firmware available (Build 162351) Ver.1.1.29 for my EA6500 (v1) is very unstable, and I had to roll back to 1.1.28 (Build 146072).

    This occurs when the two bands of wireless network are enabled. The router works for 5-10 minutes (sometimes even shorter) and restart only randomly.

    When wireless networks are disabled, it is pretty solid as a rock.

    Roll back to 1.1.28 solves this problem, if at least I can have functioning wireless networks.

    It would still be nice to be able to use the latest and best however. As long as I would be able to access the router using my Tablet and IE11.

    Has anyone seen similar behavior? If so, advice?

    Thank you

    CFC

    How did you get the update? The proposed method is to:

    Perform a factory reset

    Flash the firmware manually after uploading to a pc cable

    do a factory reset

    make the config from scratch, not from a restore

    The second Reset clears any old stuff on the router and solves some problems such as you saw.

Maybe you are looking for