Please specify the type of license.

Similar Questions

• Please specify the following license number

  Hello
  
  Please specify the following license number
  
  Oracle 10g to license requirement while using a machine of 520 power 6 with 2 strands 4.2 GHz card, 4 memory DIMM slots. We have the right to pay for a license of oracle 10g SE?
  
  Thanks in advance

  Go back and read the definitions of licenses example OLSA (to oraclestore, for your country).

  First to know if the whole machine allows to SE or SE1 licenses. (And a quick guess the "520" depending on the type of machine/model, is max two Sockets.)

  Then check how the number of 'Oracle processors' is counted in your case, for example a what I said «...» When licensing Oracle programs with Standard Edition or Standard Edition in the name of the product, a processor is considered equivalent to a socket busy; However, in the case of multi-chip modules, each chip in the multi-chip module is counted as an occupied socket. "

  Hardware partitioning could make a difference, depending on how Oracle sees PowerVM partitions in conditions of licence.

  But, of course, depending on your specific situation, the business relationship with Oracle, etc., you will have the possibility to make a contract tailored to your specific needs.

  Published by: orafad on January 30, 2009 23:10

• How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

  How can I register my copy of Lightroom 5.7 with the serial number that I bought? Information system currently lists the type of license as "creative cloud."

  I downloaded 5.7.1, he asked for a serial number, and now everything is OK. Thanks for the help.

• Add an attribute of the element configuration table type programmatically.  How can I specify the type of table?

  I am trying to add a configuration item that is an array of strings.  I don't know how to do this programmatically and have it show as an array of strings.  I would like people to be able to use the client of vCO and only change these if needed is.  I managed to add items, but they appear as "modified".  I can retrieve all ok by programming, but I guess since one can table actually waiting variant values is done deal as the generic object rather than an array of strings.  Is it possible to force this type when I put the value via the api?  It's my test code:

  var testArray = new Array();
  testArray.push ("string1");
  testArray.push ("string2");
  element.setAttributeWithKey ("TestKey", testArray);
  This translates into an attribute of type table, but I like it to be of type Array/string;

  Paul, as far as I know, you must manually set your attribute types using the vCO client. You cannot specify the types using script.

• Get the error PLS-00103 while specifying the Type of package

  Hey bud,
  All by specifying a Type which is the table of a different type, in the same package, I get an error in my PL Sql Developer, saying:
  
  
  Errors of compilation for the OASIS_TST PACKAGE. PK_OA
  Error: PLS-00103: encountered the symbol "TABLE" when awaits one of the following values:
  opaque object
  Line: 61
  Text: as a table of tp_report;
  
  Here are the specs of my package where the respective Types are declared:
  
  ************************************************************************
  create or replace package pk_oa
  is
  function (report)
  as in pd_date)
  return tp_tab in pipeline;
  
  type tp_report
  as an object
  *(*
  ID INT,
  last_nm VARCHAR2 (50).
  first_nm VARCHAR2 (50).
  full_nm VARCHAR2 (50));
  
  type tp_tab
  as the table of tp_report;
  
  end;
  **************************************************************
  Could you find where I'm wrong with this piece.
  Thank you
  
  HP

  You must create types of objects outside packages:

  SQL> create or replace type tp_report
    2  as object(
    3     id INT,
    4     last_nm VARCHAR2(50),
    5     first_nm VARCHAR2(50),
    6     full_nm VARCHAR2(50));
    7  /
  
  Typ wurde erstellt.
  
  SQL> create or replace package pk_oa
    2  is
    3
    4  type tp_tab
    5  is table of tp_report;
    6
    7  function report (
    8  pd_date in date)
    9  return tp_tab pipelined;
   10
   11  end;
   12  /
  
  Package wurde erstellt.
  

  URS

• Specify the type of display data

  I created a view with a couple of fields are null, for the purposes of the Union with other views/tables. However, I guess that the default data in oracle for a null field type is CHAR (0).
  
  My question is how can I specify a type of data such as VARCHAR2 (255) in my view selection for these fields null statement? TO_CHAR tried with no luck. Select Basic syntax I use is:
  
  SELECT table.field "LIKE Field2", AS field3, table.fieldx
  TABLE
  WHERE THE...
  
  Thank you

  TrojanMan wrote:
  Thanks for the reply, but I want to avoid layout tables Fund because my source data are dynamic of an another oracle DB through a dblink, where points of view.

  So, I'm gathering that this is not possible? If so, that's fine...

  Thanks again

  You can use the CAST expression in Oracle to specify a data type, for example like this:

  create or replace view test_view as
  select cast(null as varchar2(255)) as dummy1,
  cast(null as number) as dummy2
  from dual;
  

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Specify the type of data when using the "CREATE TABLE AS SELECT"?

  In the table creation code I'm trying to create a DATE column called DOB below. However, the resulting DOB column in the condamnes2 table is a Varchar2. How can I specify that I want to be a DATE field DOB? (I know that I can create the structure first and then fill it but this isn't what I want.)
  
  create the table condamnes2
  SELECT Person_ID,
  decode (year of BIRTH, null, null, to_date (nvl(BIRTHMONTH,1) |)) » /'|| NVL(Birthday,1) | » /'|| NVL (BIRTHYEAR, 1500), ' MM/DD/YYYY')) DOB
  Among the people
  
  Thank you

  Use the CAST function in your decoding:

  SQL> create table Persons2 as
    2  SELECT Person_ID,
    3         decode(BIRTHYEAR
    4               ,null, cast(null as date)
    5               ,to_date(nvl(BIRTHMONTH,1)||'/'||nvl(birthday,1)||'/'||nvl(BIRTHYEAR,1500),'MM/DD/YYYY')) DOB
    6  from   persons
    7  ;
  
  Table created.
  
  SQL> desc persons2
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   PERSON_ID                                          NUMBER
   DOB                                                DATE
  

• How to change the types of licenses for Adobe CC users for accounts of the teams?

  I am the administrator of a CC from Adobe on behalf of teams for my business. We currently have 13 users who have received licences "Creative cloud - full", and we would like to drop 8 of them to Photoshop licenses only. I would like to do this in a way minimizes the impact of our users and ideally prevents an office visit.

  How can I convert these 8 users of Photoshop licenses only and reduce my monthly bill? Thank you.

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• LR 5.7 - different abilities depending on the type of license?

  I use LR on a stand-alone license (not CC). After you run the update to LR v 5.7, I wish I had access to the film simulation Fujifilm Classic Chrome for the Fuji X - T1 camera model. I already asked this question in the user forum we Fuji X camera and it mingle reports: some users say they have access to this film simulation, when opening a RAW file that comes from the first camera from Fuji X - T1 (black) - I have the same camera, but my installation LR gives me access.

  Are there two different LR v. 5.7 versions out there with different features, or I made a mistake (I tried to call the simulation simulation of film via camera/profile of Calibration) when the call of the profile?

  I see the profiles, including classic Chrome, in LR 5.7 with a RAF to a X - T1 I downloaded on the internet.

  I'm on Plan of the CC photographer, so it does not check if the serial number version has, and I'm too lazy this uninstall and install the version of serial number to check.  I can say that these are only internal to LR and ACR, because unlike other additional profiles of camera-xxxx, they lack the .dcp files on the disk, so it could be that they are in the CC version, only.  Some evidence that they should be in the no - CC version is that they ARE there in the CS6 - ACR plugin 8.7, which is not CC:

  

  Here is the entry for the LR Blog back when these profiles were introduced that doesn't say anything about them being CC only:

  5.4 now available Lightroom

  A situation where the profiles do not exist is if you were displaying a non - raw (JPG instead of a RAF) picture, because these profiles are available for raw files.

  If none of this makes sense, can we see a screenshot of the list of profiles of your camera in LR 5.7?

• SDC RTU Modbus - cannot specify the type of query for each register address

  Hi, it's Jose.

  I have try the DSC module to connect with a temperature module, but this, does not meet the MODBUS registers addresses, for example to read the temperature, I should ask a 0 x 03 at address 1001.

  

  But for DSC for a request of 0x03, it expects to addresses like 4000, so since 1000 addresses belongs to coils, SDC makes a request of 0x01

  

  My thermometer has even coils register.

  Is there a way to force the DSC to make specific requests?

  Thank you and best regards

  What happens if you enter the numbers as 400001 401001 or simply?

  Also try to only 1.

  The current Protocol does not transmit the prefix number which he calls a coil (1) or (4) record keeping, (3) registry entry.  (I mixed up to the top of the last two is possible).

  So the device describing the registry with the wrong group of addresses, may not matter.  You just lie to LabVIEW to tell him where he thinks is it supposed to be.

• Please specify the charging battery

  I read about eBatts.com or-Cad batteries must be completely discharged and then recharged. NMH batteries suffer memory also effect, but to a lesser extent. Lithium-Ion battery do not suffer and do not need complete discharge.

  I read somewhere on this forum, probably in the post of batteries with hundreds of entries which it is OK to top off the entire clip.

  Is topping off clip still the recommended charge method?

  The Clip battery is a Li-ion polymer FYI

• Type of license for the use of Veritas Backup exec with the unit?

  Nobody knows the type of license (or order number) for the use of Veritas Backup exec with the unit?

  The customer is already using the product widely in their networks, which is the license includes?

  Thank you.

  HI -.

  We use Veritas for the backup device. You will need to contact your representative of Veritas for license information - it is not provided by Cisco. Since the unit running SQL (or MSDE 2000), you will need SQL Veritas agent to back up OPEN files. We do not use dirt, but only for the backup device before performing the upgrades. And we also to break the mirror set beforehand. http://www.Cisco.com/en/us/customer/products/SW/voicesw/ps2237/products_maintenance_guide_chapter09186a0080443809.html#wp1073824

  Ginger

• Choice of the Type of correct command for a new job

  Hi all
  
  I created a post of Scheduler to update the statistics, but it won't work. * It is 10g on Windows *.
  
  I specified the type of PL/SQL block command:
  
  
  Start
  EXEC dbms_stats.gather_schema_stats ('AFDBA', cascade = > TRUE);
  end;
  
  The job fails with this error:
  ORA-06550: line ORA-06550: line 2, column 9: PLS-00103: encountered the symbol 'DBMS_STATS' when waiting for one of the following values: =. ( @ % ; The symbol ': = ' was replaced by "DBMS_STATS" continue. column:
  
  Work complete successfully if I create a stored procedure or do I have to create a .bat and specify the type of executable command?
  
  Thanks for your ideas. John

  CHECK

  SQL > exec dbms_stats.gather_schema_stats ('ABC');

  PL/SQL procedure successfully completed.

  SQL > start
  2 dbms_stats.gather_schema_stats('ABC');
  3 end;
  4.

  PL/SQL procedure successfully completed.

  SQL >

• How can I specify the file types to be included in a library in Windows 7?

  How can I specify the file types to be included in a library?  For some reason any overall my library it shows ALL files and not only the documents in the document library, the music in the music library and the pictures in the picture library.  In other words in my document library, it is also show all my music and my photos, in my music library, that is to show all my documents as well as all my photos etc.  I know I have to do something wrong but does not know what it is.  Can someone help me please?

  * original title - libraries and some type of file

  Hello

  Libraries should show only the files that are contained in the files that you add to this library.

  Example:

  In Windows Explorer, select the Document library.

  In the window display on the right, click the link x sites in the top/left of the window.

  This will open a dialog box displays all the folders that have been added to this library.

  By default, the Library of Documents should show the folders My Documents and public records .

  If there is other records showing that you don't want in this library, Select the folder and click on the Remove button.

  You can also right click the documentslibrary, in the Part of Navigation and select Properties. At the bottom of the Properties dialog box, click on the button by default is restore to remove all additional files have been added.

  Tell us what you find.

  Concerning

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.