Please think when the memory usage is too high.

Similar Questions

• Satellite A200 crashing when moved or when the CPU usage is too high

  Well so recently my Toshiba Satellite A200 started crashing everytime I have to pick up the laptop or run any processes taking the CPU up to 100% usage.

  This means essentially no rendering 3D games and no Photoshop or current iTunes running at the same time, etc. Here are the best even if it happens only when the laptop is plugged and not when only battery power. I tried to use another AC adapter, and I cleaned the hard drive for a new installation of Windows 7 that never solved the problem. I even went so far as to update the BIOS.

  I am not quite determined that he is just a hardware problem, but I was wondering if anyone had suggestions about which party can act up on me. As I said still works like a dream when running on battery power.

  > Here is the kicker if this happens only when the laptop is plugged and not when only battery power.

  The energy saving switch to another profile, using the AC adapter.
  Maybe you can try to change the speed of treatment at a lower level and could increase the cooling method parameters in the energy saving profile when the AC adapter is in use.

  Otherwise, it could be a hardware problem and in this case, you will need a help of ASP.

• AVG warned me that the memory usage is very high and I have to restart.

  Worms using Win XP. 3 and your suggestion, I've updated Firefox to worms. 7.0.1 and I still get this message that firefox uses too much memory, 300 MB or more.

  Since I upgraded to 8.0, I started to receive the warning of the AVG. The matter of fact is that my FF has been the 7.0.1 high CPU consumption first, I was monitoring the use of memory and I don't see much of a difference in usage between my 7.0.1 and 8.0. That's why I ignore these warning because it is probably a new notification of AVG that was not available for FF 7.0.1. But each user is different and will have different results.

• After upgrading to Windows 7 SP1, the memory usage is abnormally high

  After updating my laptop for Windows 7 SP1, the amount of memory is abnormally high. Before SP1 idle memory was around 2 GB after updating slowed uses 5.3 MB of my 6.1 MB in total. It is originally the laptop overheating and having problems. There is no virus present analyses of Security Essentials and Spybot doesn't show anything. The Task Manager does not any abnormal process, and no process using an abnormal amount of memory.

  Hi KnitGnosis,

  Have you seen this article?  Looks like it may solve your problem:

  http://support.Microsoft.com/kb/2505348

  I hope this helps!

• QNetworkAccessManager limiting the memory usage when no head

  I have a long application works without head that downloads files from 6 MB upwards on a web server. Now using QNetworkAccessManager to view the file, I see the memory usage, pull up and soon to exceed the limit of 3 MB.

  The QNetworkAccessManager then suffers bad allocations and crashes.

  I was hoping would be sort of the QNetworkAccessManager chunk the data of the file on the disk and keep low memory footprint, but it seems he is trying to remove all of the file.

  All means to limit or control the behavior of the QNetworkAccessManager?

  See you soon

  Paul.

  Hello.

  We started an internal investigation to verify the QNetworkAccessManager implementation.  A suggestion to try next was to try using libcurl to perform the download of files.

• ESXi 4.1 - Question about the memory usage

  Hi all

  I am currently in the process of migrating from ESX 3.5 and ESXi 4.1.0 everything by making the upgrade of my equipment (3 x HP DL380 G7, 24GO RAM, CPU Intel X 5660 2 each).

  The boxes are installed with ESXi 4.1.0 Build 384481 and hpq - esxi4.1uX - bundle-1. 0a, hardware monitoring is done using HP SIM (V6, Windows).

  What bothers me, however, is that the VSphere Client (4.1.0 Build 345043) reports steadlily increases the memory usage in the Summary tab. The increase varies according to the system, ranging from 98MB in 1848 MB in the last 3 days, continues to grow.

  During this time the performance tab reports consumed memory exceeds granted memory.

  Everyone saw this behavior, too? Is this normal or am I facing a memory leak here?

  Thanks in advance.

  Kind regards

  SilentGuy

  good no worries. Here's the jsutification who might come to our rescue.

  the reason to ask to the image is to understand tips on different time and or prabably model.

  officers of 3rd party as HP may be one of the reasons for these behaviours and this pumps memory when they perceive newspapers. I think it's side normal use would normally not go beyong 2000 MB for an esxi normal opertaing without no VM

  I suggest you to watch more than two days and see if it grows even more...

  hope this helps

• When the memory coherence is full, what consistency do?

  Dear Expert:
  
  I have a problem in customer, they ask:
  When the memory coherence is full, what consistency do?
  He takes care to write data or the entry on the disk?
  If it can be supported, how can I config?
  
  
  I read some documents, but I find things like this:
  < local plan >
  LRU <-eviction strategy > < / eviction strategy >
  < high-units > 1000 < / high units >
  < expiry delay > 1 h < / timeout >
  < / local plan >
  
  but I can not find somethings on the coherence jvm memory usage?
  
  
  Thanks in advance.

  Hello

  There is no magic solution to stop short of memory coherence. A cluster of coherence is a limited resource and has a finite size and you need to do some sort of exercise as you would with something like a database capacity planning system. You wouldn't continue to put data in a database without him running out of resources, and the same is true with consistency.

  Yes, there are things like expiry which allows you to limit the size of the caches, but like the previous poster said, when the limit is reached data will be evicted from memory. Unless you have some form of persistent storage for these data using something like a dumps, while the data is lost.

  You can set the overflow to disk so that when a size the cache limit is reached as described here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/cache_examples.htm#BACCHCIA

  The problem with the ousting of size based and exceeded the size in function, is that the limit is per cache per JVM. This means that for a system with several caches and services that you usually end up expulsion or overflow to disk for a cache that reached its limit when there still may be a lot of memory left that you need to allow for each cache being full in your design.

  I saw people in the past are trying to find different ways of ousting of data based on the used JVM heap, but they never seem to be satisfactory. If you've seen a chart of the JVM heap usage you will see that it is usually a model of Sawtooth constantly up and down. A JVM could hit 90% use but still have a lot of real space because he had not recently made a GC. If you have a schema data eveicted when the reached JVM say 90% you could start to expel the data too early. Also, it's probably enough data in a cluster push possile faster than data can be evicted if you might still run out of memory. A cluster of coherence consists of multiple JVM processes and if you get skewed the disaggregation of data or you caching of objects of different sizes, it is quite possible to get Java virtual machines in the cluster running off lot well before others. The project I'm working on that, we had a situation where we had a few nodes in the cluster using more than 300 MB of heap more than the other nodes in the cluster - is quite a big difference when the total heap was only 2.5 GB.

  As I said the best thing to do is good capacity planning. Work out how much you need to organize and work on the size of your cluster based on that data. You probably still have some sort of eviction of the data well. The system on which I work at eviction of the moment according to some data and custom eviction of other data based on business rules. Custom eviction is juats another process that verifies the data and expels the relevant stuff.

  JK

• Monitoring the memory usage on iOS using the Stats class

  I was check memory usage on an application I'm developing for iOS using Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).

  I added the class Stats to my project and redeployed and, Ouch, reported in Stats memory usage ramp upward (quite slowly) even when there is nothing going on in the application (just displaying a loaded bitmap).

  To try to find the question, I created a project with a test class that extends Sprite with just this single call in the constructor: -.

  addChild (New Stats());

  I have deployed to the device to check that he didn't swallow all of memory.

  But I was surprised to observe the use of the memory to crawl upward and upward (to 5) before kicking in some garbage and takes memory down. I left it running and then he slipped once again more than 7.5 this time before being deported back down to just below 3.

  So 2 questions that I would be grateful any feedback/comments/thoughts on related: -.

  1 is this normal (i.e. memory creeping up when there is nothing else than to the Stats in the project)?

  2 - What is the best way to monitor the memory usage in an application? Good enough stats - is Stats itself causing the memory usage?

  All the best guys!

  See also thread (http://forums.adobe.com/message/4280020#4280020)

  My conclusions are:-

  -If you run an application and let idle, use memory slips gradually upward (probably in memory is used to perform the Calc/refresh the display, etc.)

  -Periodic garbage collection occurs and memory is brought back down

  -This cycle could be more than 5 min.

  Work with your real application and memory will increase and be published much more quickly/regularly.

  -It's probably worth making an initial check running on your desktop computer to smooth out all the initial problems

• How to check the memory usage of cash L2?

  How can I check if my processor uses cash L2 memory?
  How to activate it?
  How to know how much it is?
  My laptop is satellite MX30-113.

  Hello

  Unfortunately I can't tell you much, but I found an interesting tool for editing memory. He called the Elcor V3.3. If you wish, you can see all the features of the tool. Maybe it will give you more information on the memory usage.

• Check the memory usage

  I tried this code to display the memory usage. Running in the Simulator appears that zeros?

  public class checkmemory implements Runnable
  {
  String ID = "checkmemory;
  String ModDate = "20111103";
  installation program. Setup _Setup.
  int alloc;
  free int;
  int objects;
  int objectsize;
   
  public checkmemory()
  {
      
  }
  public void run()
  {
  _Setup is new installation. Setup();
  Memstat MemoryStats = new MemoryStats();
  ID = memstat.getAllocated ();
  free = memstat.getFree ();
  objects = memstat.getObjectCount ();
  objectsize = memstat.getObjectSize ();
      
      
  HandleAlert (_Setup.Error, "alloc:" + Integer.toString (alloc) + "free:" + Integer.toString (free) + "object:" + Integer.toString (free) + "objectsize:" + Integer.toString (objectsize), "0");
  }

  Solved.  Code modified to:

  ID = Memory.getRAMStats () .getAllocated ();
  Free = Memory.getRAMStats () .getFree ();
  objects is Memory.getRAMStats () .getObjectCount ();.
  objectsize = Memory.getRAMStats () .getObjectSize ();

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• What is the difference between the memory usage and bunch of EM?

  Hi all
  
  In OAS 10.1.3.3 Enterprise Manager, JVM Metrics, there are two columns on memory:
  
  Use of memory (MB)
  Use of memory segment (Mo)
  
  (use of heap seems to be up and down, but the memory usage is never down)
  
  What are the differences between the two?
  
  Thank you very much
  xtanto

  Jin

  Just check my answer on this URL.

  What is the difference between the memory usage and bunch of EM?

  Kind regards
  Hamdy

• My B50-80 ram usage is too high for a few days

  Hi, my lenovo B50-80 ram usage is too high. It is around 80-90%.but why is this? It slows down. This problem occurs for a few days. It is 30-40% on the previous usage. But in recent days, he has suddenly increased to 80-90%. It slows down the laptop. I have not installed any program in these last days.what to do?

  Hi Johanna,.

  Alternatively, you can try to uninstall the applications that consume more memory, which is not used frequently, if still the same issue trying to run the diagnostics of the LSC (Lenovo Solution Center).

  Click here for LSC diagnostics.

  Let us know the result.

  Best regards

  Ashwin.S

• The paper is picked up too soon and the top of the page is still too high

  The paper is picked up too soon and the top of the page is still too high

  I have an HP Officejet 6500 A Plus

  I had a paper jam

  I took out the paper

  As I pulled the paper, now the print jobs are too high on the paper.  It seems that one of the gear slipped a tooth and top of page paper is not aligning properly.

  Hi @Kingvigor

  I understand that since having, and clear a paper jam, the paper is now driven by too early. Let's try the cleaning rollers and an alignment. Open the following document and move on to the solution five; Solution 5: clean the rollers.

  Once it is finished, complete the following steps to align the printer;

  1. On the printer control panel, press the right arrow key (), then tap the Setup icon (). The installation Menu appears.

• How to reduce the memory usage when loading bitmaps from the library?

  When I use BitmapData.loadBitmap () to load an image in the library, then attachBitmap() to add it to a MovieClip it takes a lot more memory instead of just to have the same image inside a MovieClip statically in a frame in the timeline.

  The dispose() function not only deletes the BitmapData object but also destroys the bitmap previously attached inside the MovieClip, so it cannot be used to free the memory.

  Is - this how it is supposed to be or there at - it another way to dynamically attach bitmaps with comparable rightly memory use have them on stage?

  You can do the same thing with movieclips: create a bitmapdata instance and use the draw() method to overlay as needed.